Base Board First! It's definitely an easy thing for installers if carpet first. However, that is not the best for you. You will be replacing the old carpet someday. Now you already have the baseboard installed on the top of the carpet, you will have to remove them to pull up the old carpet.
Baseboards are typically installed after the flooring is laid. This approach allows for a cleaner finish and ensures that the flooring can expand and contract without being constrained by the baseboards. Installing baseboards after the flooring also helps cover any gaps that may be present at the edges of the flooring.
Standard construction procedure is to always install trim/ base first then run flooring up to it. That way you can change flooring in the future without removing the baseboards.
Baseboards ought to be removed first. Flooring goes in BEFORE baseboards. New build or old, doesn't matter. If there is existing flooring and baseboards then these need to be taken out first. Not layered over. Traditional look or not.
1 Answer 1 The type of carpet can affect the height of the baseboards. I usually set the gap at 3/8'' this is normally sufficient but some really thick carpets need a full 1/2''.
Use Caulk to Fill the Gap
If you're looking for a quick fix and looks aren't the most important factor, caulk is a great option. You will want to line the floor with blue painter's tape to minimize cleanup. You'll want to use a paintable latex silicone caulk to fill the gap.
Push the Edges Under the Baseboard
Use a wide-blade carpet chisel and force the edge of the carpeting into the space beneath the baseboard molding. Be careful not to scratch or dent the molding.
If you plan to install baseboard moulding before adding carpet, it needs to be installed 1 inch above floor level to allow room for both pad and carpet. If adding baseboards after carpet is laid, it should be installed at the same height as without carpet.
Don't want to deal with removing baseboards? You can leave them in place, but you will need to leave a ¼” gap between the baseboard and flooring, to account for expansion over time. You may want to purchase some quarter-round pieces in a matching color to cover up this gap.
Caulking is required if there is a gap of at least one-eighth of an inch between the flooring and the baseboard. This helps to protect them from moisture and dust. Caulk should ideally be applied to solid surfaces such as stone, wood, and other similar materials for the best results.
No, lay your flooring next to the baseboard, leaving room for expansion. This avoids buckling.
Bump the trim button up, and you'll notice the bow rise, the steering will feel lighter, and the boat speed will increase.
The standard procedure is to install carpet after the doors and trim are installed. If you were installing vinyl or tile, you would do the same, but hold off on any quarter round trim until you're done. The important consideration, particularly for pre-hung doors, is how high to install it above the subfloor.
The trim that surrounds a door frame is called casing, and it's always installed before baseboard and chair rail because they have to butt against it. Casing is also the easiest type of molding to install because the joinery is simple, making it a perfect first project.
Carpet is one of the last things you do. Working drywall is a dirty, filthy business and taping it, plastering it and sanding it later is going to spread dust throughout your entire house, let alone the work area, even if you put up plastic sheets. The carpet will be irrevocably destroyed.
If the baseboards have not yet been installed, you should always paint the baseboards before installation. Minor damage to the paint finish will occur during installation, but this is expected. With most of the painting already done, you'll only need to do a small amount of touch-up after installing the baseboards.
Baseboards are typically installed prior to the flooring. For instance, baseboards should be installed first before laying carpeting. It allows for the edges to be tucked under and out of view. However, it's much easier and convenient for hardwood and laminate flooring to be laid first before installing the trim.
If you want to save cost on materials and time cutting, you'll want to lay them in the direction that follows the longer dimension of the room. This way, you'll only need to cut planks that meet the shorter-length walls. Following the direction of the longer-length walls in the room help to make it feel more open.
Most flooring applications do not require you to remove existing baseboards. However, you may choose to remove the baseboards and replace them at the same time as flooring installation if you want to switch to a different baseboard height or change the style to match the overall look of your remodel.
Most contractors prefer to install the baseboards first. However, it can be done the other way around, and there are arguments to be made for both choices. Installation is simpler for whoever installs first.
If you're installing the baseboards pre-carpet installation, we recommend leaving a 1-inch gap between the wall and the floor for the pad and carpet. This is more than enough space for the carpet installation without leaving too much room for dirt and debris.
Some materials, like hardwood and laminate, expand and contract with temperature and humidity changes, and baseboards typically help conceal these movements. Without baseboards, there's a greater risk that the edges of your flooring may show signs of wear over time.
Baseboards do not have to be removed to install carpet. In fact, many carpet installers choose to leave baseboards on during the carpet installation process. At the same time, you can also choose to install new baseboards before installing carpet.
Caulk is one of the most effective ways to fill the gap between carpet and baseboards.
The carpet pad shouldn't be placed over the tack strips. Tape neighboring pieces together with 2- to 3-inch masking tape or as directed by the manufacturer. The carpet padding should cover the entire floor you plan to carpet. Use a staple hammer-tacker to fasten the carpet pad along the edge of the tack strip.