Purchase 2-3 jumbo command hooks per window. Pick a finish that is the same as the curtain rods you will be hanging. Clean wall surface where you will be applying hooks with rubbing alcohol and clean cloth or paper towel. Clean gently, rubbing too hard can remove the paint.
Command hooks are a great way to hang curtains without putting holes in the walls. They're also damage-free, so you don't have to worry about sticky residue or marks left on your walls. Easy to use, they can be a great way to organize your home.
If you need an easy way to hang a curtain rod, use Command hooks. So smart if you live in a rental or are just plain too lazy to drill a goddamn hole in the wall. Get these nice chrome ones from Amazon.
When you need to quickly hang hemmed drapes or curtains, drapery hooks are an effective and easy-to-use option. The basic style of this curtain hardware staple is a single wire folded against itself – one end has a sharp prong and the other end is bent into a curved hook.
Ignore the Weight Restrictions
The large strips can handle a 24-inch to 36-inch object that weighs up to 16 pounds. The smaller hanging strips can only handle up to 4 pounds.
Great for installing curtain rods or hanging wall décor, coats, and bags! Use with rod diameter less than 5/8 in, length less than 48 in, and finial greater than 3/4 in.
When using drapery hooks, you have to make sure the hook does not go through to the front of the drape. You only want it to grab the back tab or lining. Thread the hole in the ring through the hook to attach.
Dowels and Sticky Hooks
And the beauty of using a sticky hook instead of drilling holes in the wall is that if you decide the curtains look too low or too high, you can move the rod and hooks without any damage.
Jumbo hooks allow you to hold up to 7.5 pounds! Using the revolutionary Command™ Adhesive, Command™ Decorative Hooks hold strongly on a variety of surfaces, including paint, wood, tile and more.
One of the simplest ways to put hooks onto a curtain panel of any kind is to simply pin through the top of the curtain header. There are pieces of fabric constructing the top hem, put your pin hook through the back piece of fabric only, and it will conceal the hook and will not be visible.
Put up Curtains: Slide the rod into the brackets and add the rings onto the rod (if using). Attach drapery hooks to each pleat of the curtain & each end of the curtain (if needed). Then slide the curtains onto the rod (pocket style curtains) or hook the curtains to the rings (pleated style curtains).
Related Articles. Curtains with tabs on the upper, back side can be hung at least two ways. You can slide the rod through the tabs, and in some cases you skip using the tabs and opt for rings with clips. Back tabs are strips of fabric which are sewn onto the curtains, creating a row of hidden loops.
Consider where the hooks need to be placed (this can be adjusted), then starting at the edge of the curtain, insert the needle end of the drapery hook (point upwards) in to the lining of the flat buckram heading being careful not to push the hook through the lining to the face side of the curtain.
One ring goes at each pleat to hang the panels securely. For flat panels, you usually need one ring for every 4 to 8 inches of curtain rod length. Heavier drapes need more rings that are closer together, while lightweight fabrics are usually fine with rings every 7 or 8 inches.
As a general rule of thumb, the heavier the fabric, the heavier or sturdier the hook should be. If you're using a heavy to mid-weight fabric, metal curtain hooks or brass curtain hooks will be the most suitable choice. If your fabric is lighter, something like cotton for instance, you could use plastic curtain hooks.
Any dust, dirt, or residue can make it hard for the adhesive to form a strong bond. I recommend cleaning the area with a Magic Eraser, because it's quick and easy, and will thoroughly clean most surfaces. After using the Magic Eraser, wipe the area with rubbing alcohol to leave it squeaky clean.
If the hook base is wide enough for it, the instructions usually indicate to put strips side by side, and also indicate it can hold double the weight on the hook packages. Perhaps this is obvious, but you can NOT double the weight by layering two strips. 11 of 11 found this helpful.
Command™ adhesive holds strongly to a variety of surfaces including wood, tile and glass as well as solid, hollow and painted walls. It removes cleanly using 3M stretch-release technology, leaving no cracks, holes, damaged plaster or sticky residue.
Yes, you can hang a mirror with Command Strips as long as you use the right amount to support the weight of the mirror. Each strip can support a certain amount of load, and when combined together, these weight thresholds can be increased to support even some large mirrors.
These sticky Velcro strips will cost a little more than nails, but they do their job and leave your walls completely smooth with no holes or residue left behind. The result is a beautiful, securely hung picture and a wall in pristine condition. What is this? So yes, Command Picture Hanging Strips are worth it.
I have a wooden wall shelf hanging up on my wall with Command™ strips. If you are planning to put heavy things on the shelf then it will not work. I have a plant on mine and it's been holding for at least 3 months. Make sure you get the Command™ strips that can hold the most weight possible, just in case.