Cellulose Insulation The best kind of blow-in insulation comes from cellulose. Products such as
Both cellulose and fiberglass are energy-efficient insulation materials, but cellulose has a slight edge due to its higher R-value. The R-value for cellulose insulation is approximately 3.2 to 3.8 per inch, while fiberglass insulation typically has an R-value of 2.2 to 2.7 per inch.
Yes, you can use R19 insulation in an attic, but whether it's suitable depends on a few factors: Climate Zone: R19 insulation is typically appropriate for attics in moderate climates. In colder climates, higher R-values (like R30 or R38) may be recommended to effectively prevent heat loss.
Cons of Blown-In Attic Insulation:
Poor installation can lead to uneven coverage, material waste, and even structural issues like sagging ceilings. Hiring a skilled installer is crucial to getting the most out of this insulation type.
Air Leakage
Fiberglass insulation is less dense than other types of insulation and does not create an airtight seal, which means air can travel freely through the insulation. This is called air leakage and it's one of the most common sources of energy loss in a house.
Mineral Wool Insulation
In many ways, mineral wool is a superior insulation product. It has a higher R-value per inch compared to fiberglass, about a 22-37% higher R-value. It contains 70% recycled material, making it a greener product than fiberglass at 20-30% recycled material..
High levels of exposure to airborne fiberglass may aggravate existing asthma or bronchitis-like conditions.
Fiberglass is by far one of the most thoroughly tested building materials and can be installed in the form of batt or blown-in insulation. Fiberglass is eco friendly, non-flammable, safe to install and maintains its thermal performance for the life of the building.
Blown-in insulation, available in fiberglass and cellulose varieties, generally lasts 20 to 30 years. Fiberglass tends to be the more durable option, while cellulose is more sensitive to humidity, which can affect its longevity in certain climates.
It is possible to over-insulate your house so much that it can't breathe. The whole point of home insulation is to tightly seal your home's interior. But if it becomes too tightly sealed with too many layers of insulation, moisture can get trapped inside those layers. That's when mold starts to grow.
The higher the R-Value, the better the thermal performance of the insulation. The recommended level for most attics is to insulate to R-38 or about 10 to 14 inches, depending on insulation type.
You will want to bring up your attic up to R-38:
If your attic has 5-6″ of existing insulation, you'll want to install an R-19 to achieve a total of R-38.
If the federal recommendation is R60, then you can save yourself plenty of money on energy bills and HVAC repairs by having a minimum of R60 installed. This can be any combination of batts and blown-in insulation.
While cellulose insulation itself is treated to be mold-resistant, the surrounding structure may not be. Understanding how and why mold is likely to occur can help you prevent serious structural damage. Given these risks, swift action is imperative if you suspect your cellulose insulation has become wet.
If you'd like to install the insulation, rent a blow-in insulation machine from Lowe's.
Fiberglass batt is considered to be the best insulation for attics. Compared to other insulation materials, it is the cheapest and easiest to install. Fiberglass batt is also incredibly energy efficient, as it helps to slow the spread of hot and cold air.
Can cause mold and mildew – Because blown-in cellulose is made of paper products, it soaks up any and all moisture in the insulated area. A roof leak, pipe leak or high humidity can cause water to infiltrate the insulation, and insulated areas take a long time to dry back out.
On average, the cost of blown-in insulation ranges from $1.50 to $2.80 per square foot, leading to an average cost of blown-in insulation between $1,500 and $2,800 for a 1,000-square-foot area.
Insulation is more than just material. It's about creating a healthy, efficient, and comfortable living space. Removing old insulation might seem like an extra step, but it's a leap toward better air quality, increased efficiency, and peace of mind. So, when you're looking to upgrade, don't just add—replace.
Fiberglass and cellulose are both used for thermal insulation and come in a range of r-values. Fiberglass is quicker to install and offers more protection against mold and mildew growth. It is the most cost-effective and common insulation material today. Cellulose, however, does offer more depth in r-value.
Look for insulation blower rental equipment in The Home Depot Tool Rental Center to help keep your home cool in the summer and warm in the winter. Heating and cooling costs are the biggest portion of utility bills for the average homeowner.
There are other types of insulation, but these are the most common. The best non-toxic insulation is either mineral wool or foam insulation inserts.
In general, the color of insulation doesn't equal better performance over another color. Whether it's pink, white, brown, or yellow—color doesn't influence dependability, reliability, or the products effectiveness.
Wearing a Dust Mask is Recommended Practice
This is uncomfortable, more than anything else, and it is recommended that you wear a dust mask for your protection.