Algaecide should be added to your pool water on a weekly basis. Preventing algae is the key to fun in your pool. Algaecides act as a backup to your normal sanitization program and prevent algae from starting and growing in the pool. Algaecide should be added after every shock treatment.
Algaecide should be used after each shock treatment, so it has a better chance to support your chlorine as it works its magic. Be sure to shock your pool first, then when the chlorine levels of your pool return to normal, add the correct amount of algaecide to several places around your pool while your pump is running.
Algae happens, but you usually don't need an algaecide to get rid of it. Keeping your water chemistry clean and well balanced will prevent growth in most cases, while superchlorination with pool shock can handle minor and common infestations.
It Should Not Be Done Together
This is because when you mix chlorine and algaecide together, it renders both of them useless. Hence, you should first shock the pool and wait for the chlorine levels to fall below 5 PPM. Only then should you introduce algaecide to get the best results.
Pour the algaecide dose into the water, depositing it in several areas around the pool. Your swimming pool pump should be running at this time to help circulate the algaecide. Wait about 30 minutes before allowing anyone to swim after the algaecide application.
Copper pool algaecide lasts longer to work throughout the entire winter. Winter algaecide is designed specifically for cold weather algae prevention. Adding algaecide to your water does not interfere with other chemicals.
Add a dose of algaecide, bring your chlorine level high by shocking, and run the filter continuously until the problem clears. The next day you should vacuum up the dead algae and backwash your filter. Algae thrives in hot weather and in pools with low or no chlorine.
We recommend waiting at least 15 minutes to swim after adding algaecide to your swimming pool. Most algaecides are perfectly safe to swim with. It is not recommended to swim with flocculent in your pool as it will reduce its effectiveness.
Can I Use Algaecide to Clear Cloudy Pool Water? You can use an algaecide to kill early stages of green algae that might make your water appear cloudy, but the best method of getting rid of algae is to scrub and clean your pool using a large leaf net, vacuum, and kill algae with liquid chlorine shock.
Add a dose of Salinity Multi-Purpose Algaecide to your pool 24 hours after shocking. Dilute the algaecide with water before adding it to the pool. Algaecide prevents and kills pool algae so your pool will look beautiful all the time. That's it.
The presence of too much algaecide can lead to a foamy pool water. Small bubbles will begin to be produced as the water is pushed through the return jet and back into the pool. Do not confuse these bubbles and foam with another common problem, which is air in your pool lines.
Are algaecides safe for my pond plants and fish? Algaecide treatments, no matter what chemical is used, can be safe for both fish and plants if used correctly. The chemicals in algacides, although potent, do not directly harm your fish. Fish that die from the use of algaecides die from oxygen deprivation.
Algaecides do not directly affect the pH balance in your pool, but too much algae will raise the pH level. By eliminating algae, the algaecide helps return pH levels to normal. Algaecide also works together with chlorine, helping the chlorine to be more effective against algae and bacteria.
Best swimming pool algaecide for all pools
For an all-purpose swimming pool algaecide, we recommend Kem-Tek 60% Algaecide Concentrate. This pool and spa algaecide contains 60% of its active ingredient, polyquaternium WSCP. It's effective at removing most types of algae and preventing them from returning.
But if you add algaecide to your pool when there's no algae for it to kill, it doesn't have anything to do or anywhere to go. It will thicken the water, and the slightest agitation of the water will create pool foam. This is true of using algaecide anytime there's no algae present in the water.
Grab a brush and some baking soda. Bicarbonate, the active ingredient in baking soda, is an effective spot treatment to help kill the algae and loosen it from the wall. Make sure you really get every last particle free; black algae has particularly long and stubborn roots which makes it a persistent strand.
GETTING RID OF ALGAE
Liquid Algaecide is a strong algae depressant used for the prevention of algae growth and the maintenance of sparkling water in pools. Algae growth is the main cause of “off” colours in your swimming pool water.
Pools can immediately turn green after shocking when they have metals like copper in the water. These metals oxidise when exposed to high levels of chlorine which makes the pool water turn green. Adding a metal control product such as Zodiac Metal Remover will help to restore the pool water.
It can be used in pools, fountains, and ponds. Pond algaecide,when properly used with fish and pond plants, such as water lilies, is a great solution to algae management. When using an algaecide, make sure to follow the directions on the container. Only use the recommended amount.
Registered algaecides include copper sulfate, copper chelates (ethanolamines, ethylene diamines, triethanolamines, triethanolamine + ethylene diamine, and copper citrate/gluconate), endothall (as the mono (N,N-dimethylalkylamine) salt), and formulations containing the active ingredient sodium carbonate peroxyhydrate.
Algaecide is the best way to prevent algae from growing in your unused pool. Generally, the colder the winter, the longer-lasting algaecide you'll want. Some winter algaecides last up to three months. You should pour in the algaecide on the last day you use the pool for the season and let the pump run for 24 hours.