Murphy® Oil Soap gets deep into grime to break up dirt particles and it's safe to use on wood products like cabinets.
Whether you're cleaning one area or all of your flooring, Murphy® Oil Soap is safe to use on hardwood floors.
Painted Walls. Painted surfaces around your home, such as your walls, can be safely cleaned with Murphy Oil Soap. Grab a rag and gently remove stains from the painted surface.
For you there's no substitute. Murphy® Original oil soap is the one Mom and Grandma used to clean wood to a natural shine. Pull out the bucket and get nostalgic while cleaning wooden floors and furniture, cabinets, tile and linoleum.
And stains, marks and scratches can be removed easily from waxed floors using Murphy Oil Soap.
Do NOT clean your floors with Murphy's Oil Soap, Mop and Glo, Orange Glo, Swiffer Wet Mop, furniture polish such as Pledge, vinegar, ammonia, or any pine cleaners! All of these cleaners, over time, will dull and damage the finish.
Murphy® Oil Soap helps to seal any cracks in the wood to avoid compromising the panel's finish. Follow it up with a dry cloth, which helps to wick away leftover moisture.
When diluted properly, Murphy® Oil Soap Original Formula does not leave a residue. Despite the fact that it is called "oil soap," there is no "free oil" left behind. If you see a residue after applying Murphy® Oil Soap for the first time, it's likely that another cleaner was previously used.
Murphy oil soap will bring natural shine to your wooden floors. All you need to do is dilute it properly and follow cleaning tips mentioned above. It's unique blend of natural oils, mixed with a hint of pine scent will clean away your dirt and grime while leaving behind an anti-slip and shiny finish to your floors.
Apply a dab of Murphy Oil Soap on a damp sponge or soft cloth; then wipe the soiled area. Wipe the area again with a dry cloth. To clean the entire cabinet surface, mix 1/4 cup to 1/2 cup of the oil soap into a gallon of warm water, the amount determined by the type of cleaning your cabinets need: mild or deep.
Simply take the nut out of its shell and rub it diagonally into the scratch. Then, using your fingers, rub it again to warm the area. This will allow for the walnut's oils to soak into the wood. Finish by buffing with a soft cloth.
Already diluted, Murphy Oil's Squirt & Mop cleaner is designed to spray directly onto the floor. First, prepare a mop and a bucket of water. Spray the floor with Murphy Oil's Squirt & Mop and then follow up with a damp mop. Continue as you go, spraying first and then mopping away.
A gentle, water-based solution such as Murphy® Oil Soap Original works well when cleaning and protecting the finish on your wood floors, furniture and cabinets. The soap doesn't need to be rinsed and doesn't leave any residue.
Do not clean the floor with furniture polish, vinegar, ammonia, pine cleaners, or Murphy's Oil Soap. Those cleaners may dull or even damage the finish and will create problems when your floor needs recoating.
Liquid dish soap (ammonia-free) is safe for use on cleaning your deck when mixed with a little warm water. Simply mix 1 gallon of water, 2 tablespoons of ammonia-free dish soap (such as Murphy's), 1 pint of rubbing alcohol, and 1 quart of oxygen bleach.
No, Murphy's Oil Soap is not antibacterial.
Murphy Oil Soap - Commercial Strength
Economical, natural cleaner is ideal for mopping wood floors, paneling, and other large wood surfaces. Safely cleans finished wood furniture, cabinets, and floors. Murphy Oil Soap removes wax build-up while leaving no residue behind.
How to Clean Wood Kitchen Cabinets Using Murphy's Oil Soap. You can revive the beauty of your wood cabinets if you know the right way to clean them. Thorough cleaning will help get rid of dirt, grease, and even layers of food. Murphy's Oil Soap will do wonders for your wood cabinets.
Use a half cup of laundry detergent mixed with a gallon of warm water in a bucket to clean extremely dirty paneling. Wipe dry with a clean cloth. After drying and cleaning, use the vinegar and mineral oil solution to shine the paneling.
Brush the wood wall or paneling lightly with a microfiber cloth -- the safest and surest way to clean unfinished wood. If the surface is smooth, try wiping it gently with a barely damp cloth. Fortify your dust-removing efforts by mixing 1 cup vinegar, 1 cup of water and 2 tablespoons of olive oil in a spray bottle.
Choosing Tile Cleaners
Murphy® Oil Soap and other non-synthetic solutions are safe to use on tile and grout without wearing down either one, but other natural solutions include rubbing alcohol, particularly for more set spots of mildew. Fill a spray bottle with your solution and apply it where it's needed.
CLEANING CAN BE NATURALLY SAFE
Another great response for how to clean laminate wood floors involves a bucket, hot water, a mop, Murphy® Oil Soap or a similar natural cleaner that's safe to use on laminate.
For removing scuff marks from hardwood floors, the best tool is the Mr. Clean Magic Eraser Extra Durable.