Allow to dry for 24 hours and then repaint. To prevent regrowth, retreat the newly painted area with Concrobium Mold Control – ensuring first that the newly painted surface is dry.
Materials vulnerable to water marks should be wiped immediately after contact with Concrobium Mold Control. Over-application may in some cases result in residue formation, which can be easily wiped away with a Concrobium Mold Control-dampened cloth.
Spray the affected area, scrub with a stiff bristle brush or paper towels (which ever is appropriate for the surface), wipe off residue, respray, and let it air dry. Recheck in 48 hours to see if there's any new mold growth.
Do I need to wear a mask or gloves when using Concrobium Mold Control? No. Concrobium Mold Control contains no harmful chemicals. It contains no VOC's, is colourless, odourless, and does not off-gas.
We recommend waiting at least 2 hours to allow the Mold Control to dry before using the unit again.
Both Concrobium Mold Control and hydrogen peroxide-bases agents remove mold with a high “kill rate.” They are highly effective at killing active mold growth. Unfortunately, even though these cleaning agents kill mold, they leave dark, ugly mold stains behind.
Q:After use, what steps need to be taken for repainting a surface? A: After applying you should wait a full 24 hours to make sure it has completely dried. This will allow the paint to have it's complete adhesion properties.
This product is not considered hazardous under the 2012 OSHA Hazard Communication Standard (29 CER 1910.1200) and WHMIS 2015. Hazard Statements (GHS): Causes mild skin irritation May cause slight eye irritation.
Some have falsely assumed that Concrobium Mold Control is merely a bottle of water and baking soda, but that simply isn't true. Concrobium has devised a specific measurement of three different salts.
A great product! We had walls and ceilings covered with mold from water damage. We used a scrub brush and Concrobium and all the mold disappeared. We washed the surfaces and used a primer to prepare the walls and ceiling for paint.
You will need to ventilate the room well as the odour is very strong. I would not sleep in the room for about 12 hrs after use and then still ensure windows are open.
Typically, it's safe to return 24 to 48 hours after the remediation process is completed. This allows time for any airborne spores to settle and for the air quality to return to safe levels.
As a mold professional we use a 2-step process. We use our enzyme treatment and then apply our mold inhibitor. We also take a look and find the moisture source to help alleviate more mold from growing. As a DIY homeowner removing mold from your furniture, we would recommend using Concrobium.
Can you stay in your home during mold remediation? It's possible, though experts advise finding another place to stay since crews will need to make adjustments to your living space. The remediation process will affect not only your health but also your comfort level.
A fogger atomizes Concrobium Mold Control into a fine mist that quickly and evenly coats surfaces. Fogging is ideal for large spaces (e.g., entire basements, rooms, attics, cellars) where treating the entire area is desired, but where manually spraying is impractical.
Simply spray, wait, spray again, wipe off and rinse. There is no need to scrub. For stubborn mould stains, you may need to reapply.
Hydrogen peroxide, commonly used to disinfect wounds, is active against a wide variety of micro-organisms including mold. It acts by releasing oxygen at a rapid rate, which kills mold by oxidizing the surface and breaking down proteins and DNA.
Concrobium Mold Control does not contain any VOCs and does not off-gas. However, if you're in an area with heavy mold growth, a mask would be a good idea to limit your inhalation of harmful mold spores. If fogging, it's a good idea to avoid breathing in excessive moisture from the fog.
The only effective way to permanently get rid of mould problems is by reducing the build-up of moisture in your home. This can only be achieved through better ventilation.
Concrobium is 100% safe to use around children and pets. No need to evacuate the are as when using more typical chloride-based mold control products. And Concrobium leaves no residue that would be harmful to pets.
Concrobium products stop mold, absorb moisture, prevent mold from returning and combat musty odors without the use of harmful chemicals.
Airing out a room after cleaning mold is crucial to dissipate any volatile organic compounds (VOCs) and spores. Keep your windows open and fans running for at least 24 to 48 hours for adequate ventilation.
Customers say that Concrobium Mold Control is an effective solution for killing and preventing mold growth, particularly in areas affected by water damage. Many users appreciate its non-toxic formula and low odor, making it safe for use around children and pets.
Although it is designed to be applied directly to mold and mildew prone surfaces, any existing mold and/or mildew on the surface should be removed before priming and painting. This will ensure best results. Wash the area with a mildew remover, rinse with water and allow to dry before priming.