What size is a kitchen sink base unit?

Author: Maryjane Kreiger DVM  |  Last update: Monday, January 1, 2024

Most base cabinets come in widths that accommodate the standard kitchen sink sizes. A 30-inch wide or a 36-inch wide cabinet are most common. The height of the cabinet can be customized, but 36 inches is average. A typical 33 x 22-inch sink will fill a 36-inch base cabinet.

What size base unit do you need for a sink?

Where 36'' is a common width for a sink cabinet, the typical measurement here is going to be 24''. You should have roughly 24'' from front to back to work with, which will be enough space for any standard sink.

What is the difference between base and sink base?

Base cabinets are usually shorter than sink base cabinets, and they don't have a built-in sink. Sink base cabinets, on the other hand, are designed to accommodate a kitchen sink. They're also often deeper than base cabinets, giving you more storage space for larger items.

Are kitchen base units a standard size?

The most common standard kitchen unit size is 60cm. However, widths of 30cm, 40cm, 80cm and 100cm are also considered standard sized carcasses. Generally, 60cm kitchen units are fitted with one door, while the larger sizes often have two. These are important things to consider when designing your kitchen.

What are common kitchen base cabinet sizes?

Base cabinets come in various widths to fit even the smallest spaces to make them more efficient. The standard base cabinet widths are 12, 15, 18, 21, 24, 26.25, 27, 30, 33, 26, 39 and 42-inches. Filler cabinets are available in 6 and 9-inch widths.

How to Determine the Right Size of your Undermont Sink

What is the most common sink base size?

Most base cabinets come in widths that accommodate the standard kitchen sink sizes. A 30-inch wide or a 36-inch wide cabinet are most common. The height of the cabinet can be customized, but 36 inches is average. A typical 33 x 22-inch sink will fill a 36-inch base cabinet.

Can a sink go in any base unit?

Yes, a normal base unit could be used for a sink (A). The difference between a sink base unit (B) and a normal unit (A), is to do with the back of the unit. In a sink unit (B), the back of the unit is lower, which leaves a gap at the top for pipes to easily connect to water inlets and drainage.

Can you put a 36 inch sink in a 36 inch cabinet?

A 36" sink will fit into a 36" cabinet easily if you strap it in place. Manufacturer's allow for chubby plumber fingers to access clips to tighten. If you eliminate the clips, you eliminate the need for access.

Will a 30 inch sink fit in a 33 inch cabinet?

You need a 36" cabinet. A 33" cabinet will only fit a 30" sink.

What size should a kitchen sink be?

The most common sizes for a kitchen sink are 30" or 33", however a standard size could measure anywhere between 24" and 36" in length. Generally, sinks up to 30" will contain one large single bowl.

How do you measure a sink unit?

Here's how to measure for a basin
  1. Start with the width. Measure the distance from one side of the basin to the other.
  2. Next, measure the length. This is the distance from the rear of the basin to the front.
  3. Then, on the exterior of the basin, measure from the top to the bottom. ...
  4. Finally, measure the depth.

What is different about a sink base cabinet?

A sink base cabinet has been specially crafted to use with a sink. The cabinet does not have a back panel, which allows plenty of room for access to the plumbing. Sink base cabinets also do not have drawers, which interfere with the water lines, waste traps and any other pipes that are under the sink.

What size sink goes in a 27 inch cabinet?

For Frameless, cabinet sides are usually 3/4'' plywood each. So a sink 25.5'' and narrower would fit. For framed usually the face frame is 1.5'' on each side, so if you want to go farmhouse, you'll probably have to go for a 24'' sink to fit perfectly or I guess you can cut into the frame.

What is the standard size of a double kitchen sink?

Double bowl sinks typically have a width of 22 inches but can be as wide as 48 inches.

How many sink sizes are there?

Sink sizes

The dimensions can differ from nine inches in length, up to 40 inches for large sinks. Single-bowl sinks, on average, measure up to 30 inches in length. Standard double-bowl kitchen sink sizes are 22 inches by 33-36 inches. The standard depth of a kitchen sink is eight to 10 inches.

What size sink can you put in a 30 inch cabinet?

To determine the maximum sink size for your base cabinet, measure the interior of your cabinet and subtract two to three inches from each dimension. A 36″ base cabinet can handle a 33″ sink at most; a 30″ cabinet should be fitted with a sink no larger than 27″ wide.

Are all kitchen base cabinets the same depth?

Depth: A cabinet's depth is typically either 12 or 24 inches. The 24-inch depths are commonly used for base cabinets, while the 12-inch deep boxes are used for wall cabinets. A deep cabinet can be manufactured in shallower cabinets aren't work for your existing kitchen needs.

What are standard undermount sink sizes?

Standard-sized kitchen sinks measure 22 inches by 30 inches.

While the front-to-back measurement of the sink typically remains the same (roughly 22 inches) due to the size of most cabinets, the length of various kitchen sinks can vary immensely. This size range will cover most of the options you'll find when shopping.

Previous article
How do you dry overwatered potting soil?
Next article
Does a front door need a deadbolt?