They sell them in the 35mm size. Search for either 35mm Forstner bit or Euro Hinge Bit.
Luckily for all concerned, the vast majority of European hinge cups fit perfectly into single, 35mm-in-diameter sized hole. And the placement of the hole, while exacting, falls in one of two places for a great many popular hinges: centered on either 22.5mm or 20.5mm from the edge of the door.
Make it Snappy Tools 5mm Drill Guide with Tapered Nose for Euro Screws #45005.
The cup diameter is 35mm (1-3/8inches). For cabinets with half overlay doors and no face frame (frameless cabinet). Hinge is made from steel and is nickel plated. Half overlay doors overlay less than 1/2 the thickness of the side panel that they are mounted to.
Drill holes for the hinge body that are 35mm in diameter and no deeper than 13mm. Pre-drill the securing screws using a self-centering bit and fasten the screws through the hinge boss. Then move on to the carcass: The hinge mounting plate is positioned at the same height as the hinge and is set back 37mm from the edge.
The minimum reveal is 9/32" for a 3/4" thick door. That is, if you buy them for 1/2" overlay, the minimum face-frame width is 25/32" -- yep, just a tad over 3/4". 1-3/4" FF stiles should work for you with 1/2" overlay hinges.
European or blum hinges are a special type of concealed hinge used specifically for cabinets. Such hinges are hidden from view when the cabinet door is in its closed position. This offers the cabinet a neater look that is aesthetically pleasing.
The diameter of the hole you drill should be slightly smaller than the diameter of the screw. So, for example, if you're using a 3.5 mm screw, use a drill bit with a diameter of 3 mm. If you're using wall anchors as well as screws, the drill bit and anchors should have the same diameter.
The Pozi Countersunk Euro Screw is manufactured from moisture-resistant Zinc-Plated Steel, and available in 10, 11, 13, 14, 15 and 16mm lengths. All have a diameter of 6.3mm.
fischer Universal drill bit D-U Hex Set 5-12 mm (5 pcs) Wear-resistant drill bit for drilling in different materials and material combinations. The universal use of the drill bit saves time and costs. For rotary and impact drilling as well as for the use with cordless impact drills.
Concealed hinges simply require one large bored hole and two small screw holes, one on either side of the hinge cup. Standard hinge holes for these hinges tend to be 35mm in diameter and around 10-12.5mm deep.
Center the door. Make sure the tabs on the hinges are butted up to the face frame, and then use an awl to mark the centers of the mounting screw pilot holes. Drill the holes and install the screws. Stand up the cabinet and fine-tune the door's position by turning the hinge's adjusting screws.
For kitchen cabinets, there are 3 common hinge hole sizes: 45mm, 48mm and 52mm. The hinge hole is standard with 35mm, while the distance between fixing screws differs.
Euro hinges have two components: The hinge arm has a cup that fits in a 35mm-diameter recess drilled in the door. The mounting plate, or clip, attaches to the cabinet side or face frame depending on the cabinet construction.
To drill hinge holes in kitchen doors, you will need a hinge hole cooking kit. This kit typically includes a jig for marking where the hinges need drilling, a 2mm pilot drill bit, a 35mm hinge hole cutter, and a set of clear and easy-to-follow instructions.
Ikea's hinges are no different a fitting than any others ......... The door holes are generally 35mm diameter.
Heavy duty concealed hinge eliminates the need to use 5 or more standard euro hinges in cabinets or furniture. This reduces installation cost and time, and provides a better overall aesthetic. 2 hinges hold 55 lbs (25 kg) and 3 hinges hold up to 88 lbs (40 kg).
Leave a small gap between the door's frame and the edge of the hinge's leaf. The gap should be anywhere between 5/16" to 3/8", depending on door thickness and width of the hinge. Measure and mark appropriately before fastening the hinge to the frame. Too small of a gap will prevent the door from fully closing.