How Wide Should Curtains Be For A 100-Inch Window? The average curtain bought to hang on a 100-inch window should measure between 200 and 250 inches wide. To achieve appropriate fullness with thinner material, get curtains upward of 300 inches wide. For decorative purposes, you can go 150 inches in width.
For example, if the window is 100 inches wide, the curtains should be made to 125 inches wide in order for them to hang off the window when in the open position. For an inside-mount curtain, measure from one edge inside the frame to the inside edge on the opposite side.
A common rule for displaying curtains properly says the curtains finished width should be at least 2 times the width of your window (if not more - sheers can be 3 times the window width) to achieve a look of proper fullness.
For a 120-inch window, how wide should curtains be? Depending on the weight of the fabric and how much you want the curtains to be. At least a width and a half is what I would recommend. 180 inches is the width of each curtain.
If you want the drapes to be completely out of the way when they are open at daytime you will need to extend the drapery rod beyond the window/door frame 8-12 more inches on each side. This way this width pair will comfortably accommodate about 102"-114" wide opening.
Measure the Width
If you want your curtains to close and cover the entire window: Measure the width of your window. Add 12 inches to each side, 24 inches total. Take the total number (width plus the number you added to each side) and divide that number by how many drapery panels you want in the window.
To get the measurements, measure the width of the rod from left to right. For instance, if your window measures 72” wide, you will need curtains that will give a maximum width of 144” (window width x 2 = 144”.)
For example, if you have measured a pole or track length of 240cm (94 1/2”), then you would enter your required curtain width as 240cm (94 1/2”). Your measurement consists of the window recess (A) and an addition amount to accommodate the curtains when they are opened.
If you are interested in stationary panels, you will want your curtains to be long enough to lightly brush the floor, but not so long that they bunch up in a pile. A good rule of thumb is for your curtains to break anywhere from a ¼” to ½” from the floor, similar to a break in pant legs on your shoe.
For a 60 inch (152.4cm) window, you need curtains with a finished width at least 1.5 times that, but better are those with twice that width and even three times the width for sheers. Therefore, for a 60 inch window, you need two panels of 60 inches each for twice the width and a luxurious gather.
In the US, the standard curtain width would be 54”. But generally, it ranges from 50-58”. Some curtain manufacturers even go for as long as 108”. Again, knowing the curtain width is as essential as the length because you have to align it with standard curtain sizes.
While fashion once dictated a “flood level” bottom line for curtains—one that hung just past the window sill, short enough that it would not get wet in a flood—today, style calls for curtains to either hang down to within ½-inch of the floor or even puddle slightly.
90 inch wide curtain tend to be the widest width available in ready made curtains, and so will fit most larger and patio windows.
As a general rule, drapes will be open during the day, so make sure the curtain rod extends at least four inches on each side of the window's inside frame. To create the illusion of a wider window, extend the rod up to 10 inches beyond the window's frame.
It depends on factors such as window length, but more often than not, curtains look best when touching the floor. However, how low you want your curtains to hang will determine what you want to achieve. In reality, different decorating styles employ varying curtain lengths.
Standard curtains come in three lengths—84 inches, 96 inches, or 108 inches. "Generally, you want to stay away from the 84 inch standard curtains unless you have very low ceilings. They don't look right in most scenarios and end up being an awkward length," says Curtis.
You should aim for your curtain hem to be about 3/8" to 1/2" above the floor. Not only is this an easier length to measure for, but it also makes it simple to vacuum and sweep. It's a great option if you plan to open and close your curtains a lot since you won't need to rearrange them each time.
The sizes are listed width by width. The curtain panel is 54 inches wide by 84 inches long. Before choosing curtains, it is advisable to install a curtain rod.
Hanging long drapes on a short window is one of the easiest ways to increase the importance of the window and bring it into proportion to the room. Short drapes on a short window call attention to the size of the window and reduce the significance of the room, window and drapery style.
Standard curtains typically hang from about a half-inch from the floor to halfway between the window trim and average-height ceiling. But to maximize visual height, let the walls determine your curtain's length; in a living room, library, den or bedroom, the longer the panels, the better.
How wide should curtains be? To ensure that curtain panels look ample when closed, they should have a combined width that is 2 to 2.5 times the width of the window/rod. That means if you are ordering Grommet style or Rod-pocket style, the total drapery width should be at least 2 times the window/rod widths.
A wide variety of ready-to-hang options come in standard curtain lengths that fit many rooms. Options typically include 63-inch curtains, 84-inch curtains, 96-inch curtains and 108-inch curtains.
Curtain Width Guide
If you hang a 48-inch panel on a 48-inch window, there will be no fullness or draping. According to Curtainshop.com, finished curtains should be twice the width of the window, so if your window is 36 inches wide, you need panels that are at least 72 inches across.