Because your farmhouse sink will be fully supported by the base cabinet, it is important to get the correct size of base cabinet. Your base cabinet should measure 3" longer in length than your farmhouse sink. For example, if you have a base cabinet that measures 36" wide it will support a 33" sink.
1. Before selecting your Farm Sink Cabinet, it is good to have the sink you intend on purchasing in mind. In general, you will want to go with a sink that is 3" smaller in width than the cabinet you choose. By going smaller, you will have cabinet trim on each side of the sink.
Yes, you definitely can! Something you should keep in mind, though, is you'll have to cut out the front of the cabinet and remove the counter top prior to farm sink installation. If you want to make the job easier, consider getting a retrofit farmhouse sink, which is meant for a standard kitchen sink base.
How far should a farmhouse sink stick out? Usually, most folks choose an overhang between ½-inch and 2 inches. It's the perfect way to give your sink that stylish farmhouse look while making sure it doesn't stick out too far.
Large. A good place to start when looking for the right size is with the most popular sizes for farmhouse sinks, small, medium, and large. Or the most common, either a 30″ or 33″ single bowl. Larger sizes include 34-inch sinks and 36-inch sinks, with sizes going up from there.
Farmhouse sinks offer a traditional, rustic charm with a prominent aesthetic, while apron sinks provide a similar look with greater adaptability for modern and compact spaces. Both options are available in durable materials like fireclay, porcelain, and stainless steel, ensuring functionality and long-term use.
A farmhouse sink needs supports attached to the inside of the cabinet because it's heavy. Some can weigh over 300 pounds when filled with water. The top of the sink needs to be even with the cabinets so the counter will sit correctly.
OVERHANG - The countertop extends over the edge of the sink on all sides by approximately 1/8" - 1/4". Use caution with this installation to be sure that accessories such as colanders or cutting boards will fit properly. REVEAL - The countertop edge sits approximately 1/8" - 1/4" back from the edgeof the sink rim.
These sinks typically measure 20–42 inches wide and 7–10 inches deep, with weights ranging from 100–200 pounds.
In general, most homeowners want at least 20”-24” of open counter space on at least one side of the sink. More space, and clear space on both sides would be even better.
Build a support frame or install support bars from front to back, along the inner sides of the cabinet. The frame must support the weight of the sink and all attachments. The support frame should be positioned so that when installed, the sink is in line and level with the top of the cabinet.
Some sinks require a custom base cabinet for proper installation.
Farmhouse-Style Sinks with Quartz Countertops
Cambria surfaces are durable—more durable than marble or granite countertops—so they're the perfect choice to handle the needs of a farmhouse sink installation.
For example, if you have a base cabinet that measures 36" wide it will support a 33" sink. This will allow a bit of wooden cabinet trim on each side of the sink, which will keep your sink from resting against the dishwasher or drawer next to it.
cabinet are most common. The height of the cabinet can be customized, but 36 inches is average. A typical 33 x 22-inch sink will fill a 36-inch base cabinet. If you're replacing a sink, make sure it fits the existing cutout.
They therefore require a special cabinet configuration, but it's entirely possible to convert an existing drop-in setup to accommodate a farmhouse sink. You'll want to choose a sink that is a few inches smaller in width than the cabinet so that there is cabinet trim on either side of the sink.
Most farmhouse sinks feature a setup where the front apron and sides of the sink are connected, with both sides extending all the way to the front edge of the apron. That means, the cabinets need to be built or modified to accommodate the specialized sink.
Typically, farmhouse sinks range in length from 20 to 36 inches, with the most common sizes being 30 inches for smaller kitchens and 33 or 36 inches for standard to larger kitchens. The width (front to back) usually varies from 18 to 22 inches, accommodating different counter depths and usage needs.
Kitchen sink depths range from around 6 to 12 inches deep. However, the most popular depths are 8, 9, and 10 inches.
Are Farmhouse Sinks Out of Style? Farmhouse sinks are not out of style; in fact, they remain a popular choice in kitchen design. While trends in home decor can fluctuate, farmhouse sinks have enduring appeal due to their classic, rustic look and practicality.
If you frequently wash larger items, such as pots and pans, a single basin sink may be the better option. However, if you prefer to keep your dishes organized and separate, a double basin sink may be the better choice.
For a farmhouse sinks, the best material is typically fireclay. Its timeless elegance and durability make it a perfect fit for the rustic charm of farmhouse-style kitchens. In terms of kitchen sinks, stainless steel remains a top choice due to its versatility, durability, and easy maintenance.
To replace the old drop-in sink with a farmhouse sink, we cut the cabinets to fit the apron front and then added filler wood to the sides. We only needed two new drawers and two smaller cabinet doors to retro-fit the old cabinets. An easy fix!
If you want a farmhouse sink, then you can't go any wider than the front face (24" for a 42" corner cabinet). With an undermount or drop-in sink, you can go a little wider since the sink will be set back a few inches.