Measure the opening width under your existing sink (or where the new one will be installed) from left to right. This measurement is your cabinet size. Then, allow at least 2-3 inches on both sides for mounting hardware. For example, a 36" cabinet can accomodate a 30-32" sink.
You need a 36" cabinet. A 33" cabinet will only fit a 30" sink.
The recommended size for a 36" base cabinet is a 33" farmhouse sink or smaller. It is recommended that your base cabinet be 3 inches larger than the size of the farmhouse sink you are considering to install.
I.E.: 27”, 30”, 33”, 36”, etc. In general your sink should be at least 2-3” smaller than your cabinet size. For example, a 36” sink base cabinet can easily fit a 33” sink.
A 36″ base cabinet can handle a 33″ sink at most; a 30″ cabinet should be fitted with a sink no larger than 27″ wide. The average 24″ sink base cabinet comfortably accommodates a standard 22″ sink; be sure to consider the depth of your sink when planning storage inside the base cabinet.
A typical 33 x 22-inch sink will fill a 36-inch base cabinet. If you're replacing a sink, make sure it fits the existing cutout. If the cabinet allows, you may be able to install a larger sink by expanding the cutout. A farmhouse sink may require a special cabinet size.
Kitchen Cabinet Kings
General rule of thumb is actual sink should be 3" in actual width less than the sink base for smooth fit. However if you notch the sides of the cabinet, you should be able to get something as tight as 1.5 less than cabinet to fit.
When selecting, or designing, a base cabinet for your new farmhouse sink, it is important that the size of the base cabinet is correct. Your base cabinet should measure 3" longer in length than the sink you are installing. For example, if you have a base cabinet that measures 36" wide it will support a 33" sink.
What is the standard size for a kitchen sink? The standard size for a kitchen sink can vary, but a typical size for a single-bowl sink is around 30 to 33 inches in width and 20 to 22 inches in depth. Double-bowl sinks can range from 30 to 48 inches in width, depending on the bowl size and configuration.
The most common sizes for a kitchen sink are 30" or 33", however a standard size could measure anywhere between 24" and 36" in length. Generally, sinks up to 30" will contain one large single bowl.
The most common sink sizes for a 30-inch cabinet are 24 to 27 inches wide. These sizes offer a comfortable fit within the cabinet and provide enough room for daily use.
Another larger option, that provides more variety in its use is a 29" double bowl sink. This sink will fit in your 30" kitchen sink base cabinet and provide you with two 16x13"basins.
If there isn't enough width available in the cabinet, you won't be able to go for the bigger sink, even if there is room on the counter. Also, remember that you are going to have to create a larger hole in the counter to suit the new sink.
Most kitchen sinks can fit an average cabinet depth of 24 inches, but each kitchen sink has a minimum cabinet size requirement for proper fit. A sink's minimum cabinet size is a measurement indicating the least amount of under-cabinet and top counter space required for the sink to fit properly.
No matter what you do, you will most likely need a special or custom cabinet to accommodate your new farmhouse or apron sink. This is because there are many styles of sink designs and how they need to be installed, typically requires a non-standard cabinet. The two most common types are Drop-in or Undermount.
Start by measuring the depth of your cabinet. Place your tape measure along the bottom of the cabinet and measure from the back to the front edge. Next, measure the total width. Place your tape measure along the bottom of the cabinet to measure from the left edge to the right edge.
Besides, in order to avoid backsplash spots at the bottom of the upper cabinet, please leave more space between the upper cabinet and the sink. Usually, the upper cabinets should be at least 12 inches above the sink.
Standard-sized kitchen sinks measure 22 inches by 30 inches.
While the front-to-back measurement of the sink typically remains the same (roughly 22 inches) due to the size of most cabinets, the length of various kitchen sinks can vary immensely.
Consider the size of the sink. The base cabinet should be wide enough to accommodate the sink, with additional space on either side for plumbing and dish soap. It should also be deep enough to prevent water from spilling out onto the floor. Think about the type of material you want the cabinet to be made of.
A 36" sink will fit into a 36" cabinet easily if you strap it in place. Manufacturer's allow for chubby plumber fingers to access clips to tighten. If you eliminate the clips, you eliminate the need for access.
Standard sink base cabinet dimensions range from 30 to 42 inches wide. 30 inches is the standard single basin sink base width. 33 inches is the typical double-basin, offset sink cabinet size. 36 inches is the standard double-basin sink cabinet dimension.
Standard kitchen cabinet heights include 12, 15, 18, 30, 36 and 42 inches tall; depth ranges from 12 to 18 inches. Typically installed 18 inches above countertops, 54 inches above floor and 24 inches above stove.