Don't use abrasive cleaners such as dry cleansers or soft cleansers. Don't mix bleach and ammonia; this combination creates a toxic and lethal gas. Don't ever mix chemicals together unless directions specifically instruct you to do so. Don't use vacuum cleaners that are worn.
Clean stone surfaces with a neutral cleaner, stone soap, or a mild liquid dishwashing detergent and warm water. Similar to any item cleaned in your home, an excessive concentration of cleaner or soap may leave a film and cause streaks.
Clean stone surfaces with warm water and a mild soap such as a clear Dawn Liquid Soap. Do not use products that contain lemon, vinegar or other acids on marble or limestone.
Unfortunately, vinegar is an acidic substance, which means it can cause a chemical reaction on your natural stone surfaces known as etching. Etching is a form of physical damage on a natural stone's surface that appears as a dull mark.
Diluted hydrogen peroxide works well on Sandstone, Marble, Bluestone, and Travertine. In the case of Granite floor, simply brush the area in dry condition. No solution is required to cleanse moulds or algae from Granite floor.
Rubbing alcohol is a natural bactericide and can also kill fungus and viruses. It has no ill effects on your granite or the seal on your granite so it's an ideal way to keep countertops clean.
'Never clean marble countertops with baking soda. This could damage or wear down the sealant over time, causing it to lose its shiny sheen,' the expert says. 'Additionally, since natural stone such as marble, quartz, or any other type is an expensive material, any damage may be expensive to restore.
In most instances, using a basic mixture of soap and water will be enough to clean any dirt and debris off your natural stone. To do so you, mix a bucket of warm water with an acid-free washing-up liquid to avoid any staining or discoloration.
You should not use Lysol on your granite countertops, backsplashes or vanity tops. The cleaner contains harsh ingredients that can cause your sealer to lose its effectiveness. In specific, scents such as lemon contain citric acid, so you need to keep away from those.
Many home cleaning products, particularly bleach and vinegar, are too harsh or acidic to be on natural stone. These cleaners strip down the stone and leave it in a weak, damaged state. Unfortunately, whenever natural stone is damaged it cannot always be repaired back to its original condition.
Cleaning large stones, boulders & feature stones
Cover the stones in a combination of water and washing up liquid or vinegar and use a scrubbing brush to clean the surface, removing any dirt and algae. Once done, you can rinse with a hosepipe to reveal the natural stone colour below.
Add undiluted vinegar to a bucket and apply it to your stone with the plastic brush. See if it removes the white residue. If it does then you don't need to use muriatic acid. If you need the muriatic acid you'll have to dilute it according to the directions on the bottle.
Quartz is an incredible material and easy to clean.
The beauty of natural stone with the durability of a manufactured one. For heavier stains, glass or surface cleaners will do the trick since quartz is non-porous and you don't have to be as finicky with the pH as you would with granite.
Pour or spray 3% to 4% hydrogen peroxide over the area with rust stains. Use a nylon brush or a cleaning pad safe to use on natural stones to agitate the solution. Let it sit for at least 24 hours, and then rinse afterward.
Scrub with Bleach and Water
Prepare a 50/50 solution of bleach and clean water to use with a soft nylon brush or pad. Allow the bleach and water solution to sit for about 15 minutes after the first scrubbing session, then finish the job by rinsing with clean water and using natural stone cleaner and sealant.
Molds are fungi and they can, and will, grow back after bleaching. There are 4 simple ingredients you can safely use to clean away mold in your home: white vinegar, baking soda, hydrogen peroxide, and detergent or soap.
Baking soda and vinegar are typically used together when dealing with a mold problem since they kill different species of mold. Add one quarter of a tablespoon of baking soda into a spray bottle of water. Shake the bottle to dissolve the baking soda into the water. Spray the moldy area.
Products that should never be used on these types of stones include vinegar, Scrubbing Bubbles, Tilex, Comet, etc.
And in this case, this mixture does not work well with the natural stone countertops. Due to the fact that vinegar is acidic substance and baking soda is caustic, the result of mixing the two can have an unstable effect on stones that are porous.
Baking soda can usually be used on many metal surfaces but take caution with aluminum. You may be able to get away with using it if you quickly apply it and rinse it off. Leaving it on can cause it to oxidize which would change the aluminum's surface color.