RS-53 (R470A) has been developed to replace R410A in existing installations, although it can also be used in new equipment.
ComStar's RS-53 (R470A) is the world's only drop-in retrofit replacement for existing R410a systems. At 909, RS-53 has a GWP that is effectively 56% lower than R410a. Additionally, RS-51 (R470B) has a GWP of 717 which is 80% lower than R404a, R507 and half of R448A and R449A.
The replacements for R-410A are the two A2Ls, Forane® R-32 and R-454B. Forane® R-32 can be used in new equipment designed specifically for mildly flammable refrigerants as a replacement for R-410A equipment. Its low density allows for the use of a smaller refrigerant charge.
R32 is not suitable as a drop-in replacement for R410A and must only be used in systems specifically designed for R32.
You cannot just switch refrigerants because R410-A and R-22 have different chemical properties. R410-A operates at a higher pressure. If you put R410-A into an R-22 system, the parts will rupture due to the increased force.
Since R410A refrigerant is charged under higher pressure, charging an R22 system with it will increase the force within the coolant lines. The pressure can become high enough for parts of the system to rupture. At the very least, leaks will occur. Mixing refrigerants is not an option either.
How much will an R-22 to R-410A conversion cost? The actual cost will depend on many things, including where you live, but most of the time R-22 conversions start at around $2,000 and go up from there. The higher end of that range is somewhere around $4,500 to $4,600.
What is the replacement for R-410A? A lower GWP replacement for R-410A is Forane® R-32. Forane® 32 is a stand-alone third generation refrigerant for new residential and light commercial air conditioning systems, heat pumps and other HVAC applications.
R32 has a higher compressor discharge temperature than R410A, and will increase wear on the compressor, reducing its life significantly. Should any problem arise from a system change such as this, any liability would rest ENTIRELY with the person who carried out the change.
To retrofit an R-22 system with R-410A system your line set must not be more than 25-50 feet in total distance. If the line set is longer than this, you will have to replace the line set with larger lines.
Cooling systems shifting from R-410a to newer refrigerants like R-454B refrigerant and R-32 refrigerant will be implemented in 2025. These new coolants are engineered to be friendlier to the environment and meet updated regulations about global warming.
This hydrofluorocarbon (HFC) refrigerant is compatible with polyolefin (POE) oils and replaces R-22 in positive displacement air conditioning (AC) and heat pump systems for residential and light commercial use.
R-454B is NOT a drop-in replacement for R-410A.
R410-a will be replaced by A2L refrigerants, which are a class of refrigerants that have higher efficiency and lower GWP (Global Warming Potential). The two foremost R410a replacements are R-32 and R-454B. R-32: Zero ozone depletion.
Examples of Drop-In Refrigerants:
R437A and R438A: Replacements for R22 in refrigeration and air-conditioning systems. R449A or R448A: Alternatives to R404A, with significantly lower GWP. R513A: A replacement for R134a with low global warming potential (GWP)
Regulatory Changes: As the phase-out continues to restrict production levels and importation, the R-410A price will likely increase. Manufacturing Costs: Fluctuations in the cost of raw materials and manufacturing can also influence the price of refrigerants.
RS-53 (R470A) has been specifically designed to mitigate these changes to the refrigerant user by reducing the direct GWP of the refrigerant while not compromising its energy efficiency and technical properties as a suitable Drop-in replacement for R410A.
Changes to the Dangerous Goods Legislation, effective in 2021, has new categories for A2L refrigerants. R32 is a synthetic greenhouse gas. If released to the atmosphere it can contribute to climate change. R32 is a flammable refrigerant.
R-410A PHASE-DOWN TIMELINE
We will reach a 70% decrease by 2029. In 2034, we will see 80% less R-410A being produced than it is today, and the phase-down will end in 2036 with another 5% reduction.
Because its properties and performance match those of R-410A, Opteon™ XP41 is an ideal replacement. Other properties that make it adaptable for its many uses include the lowest GWP of 1377—30% lower than R-410A—and an A1 nonflammable ASHRAE safety rating.
An environmentally more benign refrigerant for replacing refrigerant R410A includes a majority portion of refrigerant R32 and a minority portion of refrigerant R134a, the volumetric capacity of the replacement refrigerant permitting it to be used as a near or exact drop-in replacement for refrigerant R410A in terms of ...
In most cases, R32 is the superior refrigerant when compared to R410A. While neither refrigerant depletes the ozone layer, R32 has a lower GWP and is easier to recycle. R32 also has lower operating and maintenance costs and is nowadays more common than R410A due to the phase-out.
R-22 uses simple mineral oil, non-toxic, safe, stable, etc. while R-410a uses a somewhat exotic Poly o Ester (POE) oil typically found in jet turbine engines. The refrigerant used MUST match the oil present in the system, which is one reason why you can't replace the R-22 with R410a in a system.