Insulation levels are specified by R-Value. R-Value is a measure of insulation's ability to resist heat flow. The higher the R-Value, the better the thermal performance of the insulation. The recommended level for most attics is to insulate to R-38 or about 10 to 14 inches, depending on insulation type.
Yes, you can use R19 insulation in an attic, but whether it's suitable depends on a few factors: Climate Zone: R19 insulation is typically appropriate for attics in moderate climates. In colder climates, higher R-values (like R30 or R38) may be recommended to effectively prevent heat loss.
You will want to bring up your attic up to R-38:
If your attic has 5-6″ of existing insulation, you'll want to install an R-19 to achieve a total of R-38.
While loft insulation is an effective way to improve energy efficiency and reduce heating costs, over-insulating can lead to several potential issues. Firstly, over-insulation can lead to poor ventilation in the attic, which can cause moisture buildup and increase the risk of mould growth.
Pros of Blown-In Attic Insulation: Enhanced R-Value and Energy Efficiency: Blown-in insulation significantly improves your home's R-value, which is a measure of heat resistance. This means your home will stay warmer in the winter and cooler in the summer, helping you save up to 30% on heating and cooling costs.
The recommended level for most attics is to insulate to R-38 or about 10 to 14 inches, depending on insulation type.
Also, when laying down additional insulation, work from the perimeter toward the attic opening. Never lay insulation over recessed light fixtures or soffit vents. Keep all insulation at least 3 inches away from recessed "can" lights, unless they are rated IC (Insulated Ceiling).
R19 Insulation offers superior thermal insulation compared to R13. With a typical thickness of 6.25 inches, R19 fiberglass is designed for use in 2x6 wall cavities, making them suitable for colder climates where higher thermal resistance is necessary.
If the existing attic insulation is an R-19, you may choose to add another layer of R-19. Two layers of R-19 at 6¼ ” thick will achieve a total R-value of 38. So adding an R-19 batt to an existing R-19 batt will give you a total insulation value of R-38.
You can use faced or unfaced batting when installing between the roof rafters of finished attic spaces. When using paper or plastic batting insulation, that moisture barrier should face outward toward the attic space. Even if the attic space is unheated, it's typically warmer than the outside air in winter.
Key Differences: Thermal Resistance: R-21 polyiso boards offer higher thermal resistance compared to R-19, which makes them more effective at reducing heat transfer in colder climates. Thickness: Both R-19 and R-21 polyiso boards are compact by offering high R-values per inch.
If you're concerned about having a positive impact on the environment, fiberglass batt is probably the best insulation option for your attic.
The U.S. Department of Energy recommends attic insulation levels of R-49 to R-60 for most homes in colder climates, and R-30 to R-49 for homes in warmer climates.
The most common application of R19 Insulation is in a vertical wall framed by 2×6 studs. As mentioned above this is a common code requirement in some parts of the United States. R19 Insulation can also be used in other areas around the home, including floors and crawl spaces.
Heat naturally rises, and without proper insulation, it escapes through your attic, forcing your HVAC system to work harder. 💰 Upgrading insulation can reduce energy costs by up to 30%! ✅ Better insulation = less heat loss in winter and less heat gain in summer.
For example, homeowners in the southern United States can begin insulating their attic using materials that have R-values in the R30 to R60 range and R13 to R19 insulation ratings for the floors. Attic insulation should be R49-R60, while floor insulation should be R25-R30 for those in the north of the United States.
As mentioned above, you can always increase your R-Value simply apply an extra layer of insulation over your initial layer.
Depending on where you live and the part of your home you're insulating (walls, crawlspace, attic, etc.), you'll need a different R-Value. Typical recommendations for exterior walls are R-13 to R-23, while R-30, R-38 and R-49 are common for ceilings and attic spaces.
Do I Have To Remove Old Insulation? Unless your insulation is wet, moldy or infested with pests, you don't need to remove it before adding insulation on top of it. ENERGY STAR® recommends that you inspect your insulation for signs of mold, mildew, moisture and pest infiltration before making this determination.
Can I put plywood over insulation in the attic? Yes you can install plywood subflooring directly over the floor joists and insulation on your floor. You need to install rigid insulation boards on top of the attic flooring joists and then install plywood over the top.
Insulating your attic floor can create a vented attic, which is ideal for storage and not needing temperature control upstairs. Insulating the ceiling will make an unvented attic, which allows you to control the temperature for temperamental storage items, living space, and HVAC ductwork.
Overall, the second layer of insulation plays a crucial role in improving insulation performance, reducing heat loss, and maintaining a comfortable and energy-efficient living space.
Rigid foam board insulation is available in many materials, including polystyrene (R-3.8 to R-5.0), polyurethane (R-5.5 to R-6.5) and polyisocyanurate (R-5.6 to R-8.0). Since it has the highest R-value, rigid foam is typically reserved for foundations and basement walls.