Vinyl siding can withstand a powerful gas pressure washer (2,500-3,000 psi). Aluminum, stucco or soft-grain wood homes will do better with a less powerful washer (about 1,200-1,500 psi). Determine whether you will rent or buy your machine.
The answer is: YES, pressure washing absolutely can damage vinyl siding if done incorrectly. We have seen countless homes and buildings that have damaged areas because someone without the proper training has tried to pressure wash their building.
1000-2000 PSI
Good for light cleaning jobs or for jobs where the surface to be cleaned is soft and easily damaged. This pressure range is good for cleaning decks and siding and for light-duty auto cleaning.
Reach for the 1500 PSI Pressure Washer and use the 40-degree nozzle to clean painted soft-wood surfaces, aluminum siding, and windows. Brick, stone, and vinyl can handle the higher pressure of the 1600 PSI model. For stucco, stick to the gentler cleaning power of the WORX Hydroshot described below.
Selecting a pressure washer with a range of 2,000 psi to 4,000 psi will give you the most effective power for removing peeling paint. With pressure washers, as with all power equipment, always wear protective goggles and closed-toe shoes.
Choosing a Pressure Washer
Vinyl siding can withstand a powerful gas pressure washer (2,500-3,000 psi). Aluminum, stucco or soft-grain wood homes will do better with a less powerful washer (about 1,200-1,500 psi). Determine whether you will rent or buy your machine.
To correctly strip old paint, you should work with a power washer with a psi of 2000 or higher. Even starting out at 2000 probably won't do the trick and you'll need to set the psi closer to 3,000 for effective paint stripping.
Medium-duty pressure washers produce 2,000 to 3,000 PSI and can be used to remove grease and grim from concrete, sidewalks, decks and siding.
LIGHT-DUTY pressure washers in the 1,300 to 1,700 PSI range are great for cleaning patio furniture, lawn equipment, stairs, and vehicles such as automobiles and small SUV's.
PSI Pressure range for Different Surfaces
Different surfaces require different levels of PSI pressure. Generally, for most residential uses, an electric pressure washer (less than 2000 PSI) will suffice. Soft surfaces, such as decks and siding, usually require more cleaning power than harder surfaces such as driveways.
Mid-Range Power: 2,000 to 3,200 PSI
The most versatile category of pressure washers, those ranging from 2,000 to 3,200 PSI effectively clean cars (including the most well-used off-road vehicles), home siding, fences, boats and grimy garage floors. Those closer to 3,200 PSI work effectively on tough stains, too.
For the average homeowner who wants to wash their car, clear dirt off the siding of their house and dig out all the gunk in between 30-year-old pavers, the Sun Joe SPX 3000 XT1 is the best pressure washer for the job.
Spray Your Siding Clean
Be careful not to spray directly at eaves, vents or light fixtures. High water pressure can knock out loose windowpanes or break them. Also, keep the angle of the wand pointing down so you don't spray up under the laps of horizontal siding.
While it can usually withstand normal seasonal changes in temperature, extreme temperature swings can present a problem for vinyl siding. Major heat waves can cause it to melt, while frigid cold snaps can cause it to crack – this process can also occur gradually over the years as your siding ages.
When cleaning your vinyl siding, it is important that you not use any cleaners containing organic solvents, undiluted chlorine bleach, liquid grease remover, nail polish remover, or furniture polish or cleaners. These products can potentially damage the surface of the siding.
To clean your siding without a pressure washer, you're going to need a brush, some TSP (trisodium phosphate--it can be found in most hardware stores), a bucket, a hose, water, a ladder, and plenty of elbow grease.
Soft-washing techniques work best for cleaning your home's siding and roof. Pressure washers with soft-washing nozzles risk damaging siding, cracking roof tiles, and breaking glass windows. Soft-washing services, on the other hand, are entirely safe for all exterior home surfaces.
Too much pressure (generally anything more than 1,900 PSI) can damage the paint job on your vehicle. If you're determined to do so, keep the following tips in mind. In addition to using the right pressure (1,000 to 1,200 PSI), make sure you use the correct nozzle.
For regular maintenance and light household cleaning jobs, a light-duty pressure washer will do. These feature PSI ranging from 1500 to 1900 and would be enough to get rid of dirt and mild stains. This is the safest pressure washer PSI rating for all surfaces, but it isn't ideal for getting rid of tough stains.
Domestic vs Industrial or Professional Pressure Cleaner
If your pressure cleaner only goes up to 1500 psi at maximum, you can still clean your driveway. However, take note that it may take a little longer and more effort, and there may be some dirt and stains it will not get out.
2,000 - 2,900 PSI: This is a moderate strength unit used heavier residential tasks. These units are commonly sold as either electric or gas pressure washers. 3,000 - 6,900 PSI: These high pressure models are what professional pressure washers and contractors usually use.
Removing exterior paint requires a stronger stream of pressure than soft washing jobs such as cleaning a roof. Thus, you want to find a pressure washer that is up to the task. To properly strip old paint, you will need a pressure washer with a psi of 2000 or higher. Even setting the unit at 2000 won't do the trick.
Determine How Much Pressure Is Needed
Other sources say you should have between 2,000 and 4,000 PSI. Based on our experience, we recommend getting a pressure washer with at least 3000 PSI. It requires a lot of pressure to break the chemical bond between the surface and the paint.