Goof Off
Using a resin or latex paint remover solvent, such as Latexsol 6840, prevents labor intensive work! Using a hot vat soak with our xylene paint removers makes cleaning out resin totes and tanks a breeze. Streamline your cleaning process and remove stubborn dried latex and resin with our dedicated paint removers.
The product you are thinking of is Goo Gone Latex Paint Remover, and yes, it will work. Spray the Goo Gone around the edges of the paint stain and work inwards, slowly but surely. When you spray the edges of the stain, let it rest for about 10 minutes so it can work its way between the paint and the carpet fibers.
Motsenbocker's Lift Off Latex Paint and Overspray Paint Remover 4.5 oz. (MLO#5). Lift Off works on fresh and old latex paint, linseed oil, water-based sealers, wood stains, paint overspray, stencil paint and lacquer. It cleans paint tools and equipment, brushes, windows, cabinets, floors, vehicles, concrete and stone.
Soaking dried latex paint stains in a 2:2:1 mixture of vinegar, ammonia and salt is a powerful way to lift paint from clothing fibers before laundering. Use a paint solvent like turpentine to tackle dried oil-based paint stains on clothing.
If the stain persists…
If stain remains you can try using hydrogen peroxide on the affected area. Begin by filling a spray bottle with hydrogen peroxide. Dampen the stain without soaking the carpet. Let it sit for at least one hour.
After the job is done, Goo Gone also works great on paint brushes and other tools. It even removes dried paint. Works on wet and dried latex paint, acrylic paint, craft paint and enamel paint. It can also be used on varnish, shellac, and caulk.
As mentioned above, you can remove latex paint with fingernail polish remover or acetone.
How do you remove dried liquid latex from carpet? Oil breaks down the latex but can wreck clothing. You have to apply the least amount of oil to the latex stain (often with a Q-tip) and try and peel it off the carpet fibers (tweezers work well if it's really clinging).
Acetone or Ethanol should do it.
Make a thick baking soda and water paste and apply it to the wall. Leave it on for a few minutes. Use rubbing alcohol, acetone, or heated vinegar to loosen the paint further. Now, use a piece of sandpaper or a scrapper to remove the loosened paint.
Goof Off Paint Remover for Clothes is the trusted latex paint remover by Do-It-Yourself consumers to remove the toughest dried paint.
It's latex, so you're probably good to try rubbing alcohol or windshield wiper fluid, which is normally methanol. Dunk overnight in a plastic tote you don't particularly care about.
Yes, baking soda is a great stain remover for latex paint. As many know, baking soda really works for any household dilemma you run into and can be considered a great solution for removing stains of any kind.
Yes, old dried latex paint can be removed from wood surfaces using a combination of heat and moisture. Gently heat the area with a heat gun to soften the paint, then use a scraper to lift it away. Alternatively, you can apply a wet cloth over the area and let it sit to help loosen the paint, followed by scraping.
Latex Paint Remover: dry paint. For removing paint in small spots, the go-to product, the industry standard, is of course Goof-Off. Another honorable mention is Motsenbocker's Lift Off. All painters carry one of these, always.
Cleaning up paint spills and splatter is easy with Goo Gone Latex Paint Clean-Up Wipes. Just wipe the paint away. Learn more. It even works on tools & brushes!
Now, this isn't some miracle agent that will melt the paint off in seconds—vinegar doesn't work like a chemical stripper. But with a little patience and the right approach, it can certainly help. Here's how: It Softens Old Paint: When applied to paint, especially older layers, vinegar helps loosen the paint's hold.
Either product will soften the asphalt. Never use mineral spirits or paint thinner for cleaning latex paint from brushes or surfaces. It may separate the pigment from the solvents during a thinning application or fail to dissolve during a cleaning application.
SOLVENT: Apply a solvent to the latex rubber to soften it. Usually leaving the solvent on for about 15 minutes is plenty of time to soften the latex. Any longer and the solvent will begin evaporating, allowing the latex to harden again.
I've done a lot of house painting and just renovated an office where I had to remove 3-year-old dry latex paint from painted surfaces - denatured alcohol works very well dissolving dry latex paint. It works better than acetone/ laquer thinner or "goof off" and is less volatile.
The most reliable method is to use Goof-off 2. It's different from standard Goof-off. Goof-off 2 is an ammonia based solvent which softens the latex without touching the oil based poly. Windex seems to have a similar property, but a little more mild.
To remove dried paint, products like Krud Kutter Latex Paint Remover can help you tackle the job. This specialty Krud Kutter formula removes latex paint from a variety of hard, soft and porous surfaces, including carpet, fabric, concrete, brick, wood, vinyl flooring and trim, laminate, tile and ceramic.