The Wet and Forget Outdoor Concentrate is ideal for precise applications on surfaces such as sidewalks, retaining walls and fencing. Wet and Forget works with the rain and wind to gently clean up moss, mold, mildew and algae on virtually any outdoor surface.
Bleach solution
All you need to eliminate the algae is bleach and water. While you can try using water alone, you will need to wash the siding more frequently to eliminate the algae and stave off new growth.
Bleach is great for killing algae (and other organisms that may lurk in your tanks) and for keeping it from coming back.
Use This Bleach Solution
Professional pressure washers use a prewash cleaning mix of bleach, water, and a surfactant. The surfactant prevents the solution from evaporating too quickly. This allows time for the bleach to kill the algae and other undesirables.
Barley straw is a natural way to fight algae. On contact with water, the straw starts to break down, and as it does so it releases peroxides into the water which combat algae. Available in mini bales, or as a concentrated extract of barley straw liquid, it's a natural way of chemically fighting algae.
Shock Your Pool
Shocking is the process of adding chemicals to your pool to raise chlorine levels and kill bacteria and algae. We recommend using a calcium hypochlorite shock to treat your algae problems.
If you have an algae problem, your best friend is white vinegar. White vinegar can quickly kill algae but is not harmful to birds, insects and the majority of plants. Use a mixture of one part water to one part white vinegar to spray down the area and kill the algae.
When added to water containing algae, H2O2 breaks down into water and oxygen, releasing free oxygen radicals in the process. These free oxygen radicals can then react with and destroy the cell walls and membranes of algae cells, causing them to die off.
Mix two gallons of water, two cups of oxygen bleach, and one cup of borax. Stir the recipe until everything dissolves. Add ¼ cup of dish soap and stir. Apply the cleaning solution and scrub with a brush.
EASY Algae Remover is a professional strength product but suitable for DIY use. The easy to use formula can be used on paths, patios, decking, walls, fences, roofs, garden furniture, statues and memorials.
Snails, crabs, and sea urchins also eat algae, but they are known to eat red slime algae, green film algae, hair algae, brown film algae, and many other species of algae in the saltwater.
Hardware stores and home centers sell products designed to kill moss and algae, but you can save money by using inexpensive chlorine bleach or a non-creamy hand dishwashing detergent, such as Dawn.
TIP 5: USE BLEACH OR VINEGAR
Oxidized bleach immediately starts to kill algae cells once it comes into contact with it. Bleach, however, should not be your first option, especially if the area you plan to rid of algae is near plants or grass.
Sodium Percarbonate is an excellent killer of bacteria, fungi, various viruses and mold, so it can be used as a very effective agent for removing algae and moss.
Vinegar is acceptable to use for killing algae and cleaning a pond when it is drained. The acidic is good at lifting away the stubborn algae deposits and stains without damaging the liner material. When used in this way in limited amounts, the leftover vinegar residue won't hurt the fish or change the pH of the water.
Since baking soda is highly alkaline and reacts when mixed with an acid, many people assume it can be used to change the pH of a pond to discourage algae growth. However, even a large amount of baking soda dissolved in a pond will have little to no effect on either algae or pH.
Apply a mustard algaecide following the label directions. Allow the water to circulate for 24 hours. Use a pool vacuum or backwash the pool again to remove the remaining dead algae. In persistent cases, brush the pool and apply algaecide once more after two to four days.
Another chemical-free solution that you can consider is a mixture of baking soda, water and vinegar. Add two parts of white vinegar to one part of water and three heaped spoons of baking soda. Dip a scrubbing brush into the mixture and apply it to the algae stains on your furniture. Leave it for about ten minutes.
In the case of blue-green algae: Use 1.5 to a maximum of 2.5 ml of the 3% solution of hydrogen peroxide per gallon of water. In the case of green algae: 20.25 ml to a maximum of 32.5 ml of the 3% solution of hydrogen peroxide per 13 gallons of water.
You can use a bleach and water solution made with Clorox® Disinfecting Bleach for cleaning algae and mold from exterior sealed non-porous surfaces like stucco and painted wood, siding, tile, brick and patio stone. In some cases, bleach and water are all that's needed to clean away mold and algae.
But as it turns out, copper pennies do a pretty good job of keeping algae away for a few days! Pennies made before 1982 contain copper and according to Google, “copper kills algae by binding to it, which damages the algae cells, causing them to leak and die.” I tossed in 10 pennies and waited for the results.
A rule of thumb is 1.5 lbs. of baking soda per 10,000 gallons of water will raise alkalinity by about 10 ppm. If your pool's pH tested below 7.2, add 3-4 pounds of baking soda. If you're new to adding pool chemicals, start by adding only one-half or three-fourths of the recommended amount.