A surprisingly effective toilet bowl cleaner The liquid version of Bar Keepers Friend is just as effective as the original powdered version, but it's easier to squeeze up into the rim of a toilet.
All that said, Bar Keepers Friend isn't for everything, namely anything that will scratch easily. According to the brand, it's safe for pretty much any non-porous surface, such as stainless steel, ceramic, and porcelain.
Simply pour a kettle of almost boiling water into the bowl, follow up with 250ml of citric acid, and leave it for some hours – preferably overnight. The next day, scrub and flush. What's good for those caked-on pots and pans after cooking dinner is also good for removing a brown stain on the bottom of the toilet bowl.
Materials Needed: Hydrogen peroxide (3% solution), toilet brush. Instructions: 1. Pour about 1 cup of hydrogen peroxide into the toilet bowl. 2. Let it sit for 30 minutes. 3. Scrub the ring with a toilet brush and flush. Regular Maintenance: To prevent rings from forming, clean your toilet regularly.
Get rid of toilet rings with magic erasers
Cut off a quarter of a magic eraser and drop it into the toilet water. Let the piece sit in your toilet overnight to work its… well, magic! Do not flush the magic eraser down the toilet ! Remove it in the morning, then flush to rinse away any residue.
White vinegar
All you need to do is pour a generous amount of white vinegar down your toilet bowl, let it soak in overnight, then scrub with a brush. Then flush to rinse, and voilà, your toilet is back to its former whiteness!
Toilet bowl rings are typically the result of mineral deposits building up on the surface of the bowl. This buildup might appear brown or green and is caused by the calcium, iron, lime, and magnesium found in the water supply, particularly in areas with hard water.
Over time your toilet water can cause an unsightly rainbow of stains and mineral build up in your toilet bowl. CLR Calcium, Lime & Rust Remover helps you flush the filth away. Before you get started, always use gloves and check if CLR is suitable to be applied on the material you are trying to clean.
A surprisingly effective toilet bowl cleaner
The liquid version of Bar Keepers Friend is just as effective as the original powdered version, but it's easier to squeeze up into the rim of a toilet.
While Bar Keepers Friend is powerful, it's essential not to leave it on surfaces for extended periods. If left for too long, it can etch surfaces. Apply the product, let it sit for only one minute, scrub as needed, and rinse promptly. Repeat if necessary.
Porcelain tiles tend to be harder, more resilient and more stain-resistant than ceramic tiles. They are one of the easiest types of tile to maintain but their surface can eventually be eroded by the regular use of corrosive chemicals such as ammonia, bleach or acids that can also damage the grout and loosen the tiles.
Pour white vinegar into the bowl to cover the stained areas. Let the vinegar soak for 30 minutes to an hour. Scrub the stained areas with a toilet brush. If the stains persist, sprinkle baking soda on the remaining stains and let it sit for up to 10 minutes, then scrub again with the toilet brush.
Try this: Swish a cup of vinegar around in the toilet bowl using a toilet brush, then add a cup of baking soda, followed by an additional cup of vinegar. Let the fizzing solution sit for 10 minutes. Use a toilet brush to scrub stains. Let mixture sit for a few more minutes and then flush.
Bleach only masks the problem—it doesn't get rid of it for good. Instead, try citric acid and a toilet pumice stone for a permanent solution. 🧽✨ Citric acid breaks down those mineral stains, and the pumice stone gently scrubs them away. Say goodbye to those marks for good!
While it can be put to a number of helpful uses around the home, WD 40 is particularly good at softening rust and limescale deposits in the toilet (and bathroom). All you have to do is spray it on the desired section of the toilet, wait a few minutes, then scrub it away with a toilet brush.
Our favorite, editor-approved toilet bowl cleaner is the Lysol Power Toilet Bowl Cleaner. It's an easy-to-find cleaner that works great on tough stains, has a clean scent, and lasts for a long time.
It is widely claimed that adding aluminum foil to a toilet tank helps to achieve a clean and shiny toilet, but critics challenge these claims due to a lack of scientific evidence.
Method 1: White Vinegar and Baking Soda
But if it hasn't worked for your toilet bowl, you might not have used enough. Vinegar and baking soda are gentle yet abrasive enough to get the toughest stains out of ceramic — but only if you use a large amount and let it sit for at least half an hour.
The carbonic acid that is in coke is what helps to clean toilet stains. Picture the acidity slowly working its way through the stains, melting them away.
When used as directed, Magic Erasers are not expected to have an impact on properly functioning septic systems, and no environmental safety concerns are anticipated. Also, we do not recommend using Magic Erasers on toilets.