For the absolute strongest retaining wall, poured reinforced concrete is unmatched. It offers monolithic strength that can hold back massive amounts of earth, especially for high, multi-tiered, or steep-slope applications.
Concrete retaining walls are usually considered the strongest due to their durability and ability to withstand heavy loads. They are highly popular for both residential and commercial properties, offering long-lasting support with minimal maintenance.
The 1/3 rule is a general guideline for stability: About 1/3 of the wall's total height should be buried below ground. This helps the wall resist the pressure from soil and moisture behind it.
Seven common mistakes when installing retaining wall blocks include poor base preparation, inadequate drainage, not using proper backfill, failing to compact soil, improper alignment of blocks, ignoring wall height limits, and neglecting to use geogrid reinforcement when needed.
Short retaining walls, such as those around 2 feet tall, may not always require a concrete footing, but the necessity depends on several factors, including soil type, drainage, and the materials used. Without a proper foundation, even small walls are susceptible to shifting, leaning, or failure over time.
Yes, a 2-foot high retaining wall typically still needs drainage to prevent water buildup behind the wall, which can cause pressure and potential damage. Adding drainage gravel and weep holes or a perforated pipe helps ensure water can escape safely.
Natural stone and reinforced poured concrete typically last the longest, often 50+ years with little maintenance. What's the cheapest retaining wall material? Timber is cheapest upfront, but concrete block offers the best balance of affordability and lifespan.
Stability depends heavily on footing depth, which is usually 1/2 to 1/3 of wall height, depending on soil type and retaining wall materials.
Alternatives to retaining walls with slope grading, riprap, anchored walls, vegetation, erosion control mats, and piling systems.
Our professional building inspectors often find that retaining wall failures boil down to poor planning, poor installation, and, most commonly, poor drainage.
If between 1.5-2 metres from boundary, maximum wall height 2 metres. If greater than 2 metres from boundary, maximum wall height 3 metres. If more than 600mm above or below ground level, are contained by a structural support.
A 4-foot wall can range from $600 to $150 per linear foot, depending on the material, with drainage adding extra cost. Drainage is non-negotiable for any retaining wall, even at 4 feet, to prevent water-related damage.
Engineers are required for retaining walls higher than 4 feet. If you need a retaining wall higher than 4 feet, you'll need to employ the expertise of an engineer. After all, it needs to be built with a solid foundation and support to ensure it can do its job without the risk of compromising its structural integrity.
Each type of retaining wall has its strengths and weaknesses when it comes to longevity. Concrete walls stand out for their unmatched durability and low maintenance requirements. However, gabion, stone, and timber walls can also last for decades with proper construction and upkeep.
An 8" x 16" standard cinder block is required to hold up at least 2000 pounds per square inch according to ASTM International. While this means that a 64-square-inch cinder block can hold 128,000 pounds, the actual cinder block weight limit is less than that.
The Four Basic Types of Retaining Walls
Even a 3-foot retaining wall benefits from a proper retaining wall drainage system. Without adequate drainage, water buildup behind the wall increases hydrostatic pressure, leading to structural failures like cracks, bulges, or total collapse.
Gravel and decomposed granite offer the lowest costs and work well for DIY installation when you need functional patio surface quickly. Resurfacing existing concrete refreshes your outdoor space at lower cost than complete replacement.
Typically, soil is considered stable up to a 2:1 slope, or a %50 grade without any form of special protection or reinforcement. You should be good to go!
Normally, retaining walls higher than three feet will require concrete footing for a retaining wall to allow decent support. Nonetheless, much lower walls will require footings in some situations, and knowing the proper retaining wall footing depth is essential for structural integrity.
Improper Footing Depth
One of the most frequent reasons for a failed footing inspection is an inadequate footing depth. Building codes and standards specify minimum footing depths to ensure that the structure can withstand various environmental forces, such as frost heave and soil movement.
The rule of thumb is to bury about 10% of the wall's height plus an additional 4–6 inches for the gravel base. For instance, a 3-foot wall would typically require a trench around 10–12 inches deep. This includes 6 inches of compacted gravel and the partially buried first course of blocks.
The most simple method of retaining is using a masonry link wall block such as the Adbri Versawall Block. This type of block requires no specific engineering, concrete, mortar or glue. That being said, if you're planning a large wall (long or high), take your time and DON'T attempt it in just one weekend!
Types of Rock for Retaining Walls
Class 5 and Class 2 gravel are commonly used for this purpose. These materials are a blend of fines (dust and small particles) and larger aggregates, usually up to 3/4 inch in diameter.
Stone retaining walls can be more expensive due to material and labor costs. They are ideal for projects where appearance and durability are priorities.