What removes sticky residue? Rubbing alcohol or white vinegar. Dab a paper towel with either ingredient, then spread the towel over the affected area for 5 minutes. Doing so should soften the sticky residue and you should be able to scrape it off easily.
Vegetable or canola oil can work wonders, as can peanut butter or mayonnaise. Spread it on, let it soak into the residue for about an hour, then wipe it away. For a tougher clean, try rubbing alcohol or vodka. Let it fully permeate the unwanted residue, then rub away completely with a cloth.
Rubbing Alcohol or Vodka
Rubbing alcohol is an effective solvent that's safe for most plastic, wood, and glass surfaces. Vodka is a good substitute. Wet a paper towel or clean cloth with rubbing alcohol, and rub the residue to lift it off.
Use soapy water, vinegar, cooking oil, or even peanut butter to saturate the adhesive, then wipe the spot clean with a cloth or paper towel. Try acetone, rubbing alcohol, or commercial cleaners on extra stubborn residue spots.
Try acetone and scrub the rubberized portion well with a cloth, avoiding contact with surrounding hard plastics. This will fully remove the sticky surface. Acetone-based nail polish remover works for this.
Mix some dish soap with warm water and soak the plastic item for a few minutes. Then, gently rub the sticky area with a soft cloth or sponge. This can often remove or loosen the residue. Baking Soda Paste: If soapy water isn't enough, make a paste of baking soda and water.
Rubber. Cleaning rubber with alcohol from time to time shouldn't be an issue, especially if you're attempting to work out a persistent stain. But if you make a habit of using it, it will eventually cause rubber to deteriorate. So for day-to-day maintenance, it's best to stick with an alcohol-free cleaning solution.
White Vinegar
It's even capable of removing sticker residue from surfaces, especially glass and metal. Vinegar's acidity is to thank, as it helps break down the adhesive and lets it be wiped away.
WD-40 is a multi-use lubricant spray that can also be used for sticker residue removal. To apply, simply spray it over the affected area and leave for several minutes. The glue should then just wipe away!
Hydrogen peroxide can soften up sticky residue. Soak a cotton ball in the peroxide and apply it liberally to the residue. Let this sit for about 10 minutes before using a putty knife or spatula to remove the adhesive. Work gently and carefully to avoid scratching the glass.
Cooking oil can soften sticky residue, making it easier to remove with a plastic knife or scraper. Apply a small amount of oil to a clean cloth or sponge and use it to wipe the sticky surface. Wait a few minutes for the oil to dissolve the substance before scraping off the residue.
Quick tip: Oil-based ingredients like mayonnaise and even peanut butter can also work in a pinch. Apply mayo or peanut butter to a sticky surface, wait 20 minutes, and then wipe it off with a dry cloth. Repeat the process if necessary.
Hand sanitizer is not just for cleaning your hands - it can also be an effective solution for removing label and sticker residue. Hand sanitizer is safe to use on most surfaces, including wood, metal, and glass. Its high alcohol content helps break down the adhesive and dissolve the residue.
One of the best ways to remove sticker residue is with rubbing alcohol, a substance that's safe to use on most surfaces (such as glass, wood, and plastic). Soak a paper towel or rag in rubbing alcohol and lay it over the surface of the sticker residue for several minutes.
Products like Vaseline made out of petroleum jelly work like oils and lotions to remove adhesive from the skin. A unique benefit is that petroleum jelly is extra-thick, so it's easy to let it sit for a long time (though its greasiness makes this unpleasant for some).
Clean with hot water
Fill a bowl or sink with hot water and add a dash of washing up liquid. Use the sponge to rub the sticky residue off. It should now come off easily. Don't scrub with the abrasive side of the sponge, as you could accidentally scratch the surface you're cleaning.
Coconut oil was the clear winner for removing sticky adhesive. As you can see in the photo the coconut oil not only dissolved the adhesive but allowed the leftover label to come off in a chunk instead of having to scrape over and over.
If you're trying to lubricate a hinge on a pair of sunglasses or remove a price tag from the surface of a plastic container, you might be tempted to reach for the can of WD-40...but you should never use it on a clear plastic surface or on polystyrene or polycarbonate plastic.
Oils, such as coconut oil, olive oil, vegetable oil or cooking oil spray, are great at removing sticky residue. Gently rub the sticky surface with oil using a cloth or an old toothbrush. The glue residue will start to slide off the plastic surface.
3M adhesive remover is amazing stuff. It beats Goo Gone by a wide margin, I recently used it to remove PETG residue from my 3D printer bed and that stuff is gnarly. 3M 38983 General Purpose Adhesive Remover - 12 oz. https://www.amazon.com/dp/B004EBNTYK/ref=cm_sw_r_cp_api_i_cU...
Windex's components, including ammonia, detergents, and solvents, work to break the bonds in glue leftovers, making them easier to remove. It dissolves sticker residue and water-based glues like white craft or school glue.
The combination of baking soda's mild abrasive qualities and the effervescent nature of the substance makes it a great sticker residue remover. Begin by making a paste out of equal parts baking soda and water. Apply the paste to the residue and let it sit for 15 minutes before using a damp cloth to wipe it away.
Yes, you can use dish soap and water to clean rubber - dip a cloth into a dish soap and water solution and scrub the rubber. How do I clean rubber gloves?
It's Not a Friend to Wood or Leather
You can use rubbing alcohol on some surfaces like marble, limestone, or terrazzo, but not on wood. The chemical will damage a wood finish. And while it's safe to use in a pinch on coated leather, like in your car, over time, it will damage and discolor the leather.
Add a little window cleaner or rubbing alcohol to a cloth or cotton ball, but don't saturate it. Wipe away the gumminess on the surface of your item. Use a toothbrush or small scrub brush to get into those hard-to-reach crevices. Repeat until the sticky rubber is completely gone.