Put baking soda in the toilet, with a combination of hot water with white vinegar, creating a volcano mixture. You can put dish detergent and boiling water into the toilet. Putting petroleum jelly on the plunger's rim is another method. Purchase a plumbing snake or call a plumber for assistance.
Caustic soda is a nasty chemical that can burn, but it's very effective for unclogging toilets. To use this chemical, you need to get some rubber gloves and eye protection. You can pick the chemical from the local hardware or grocery stores. Pour a ¾ gallon of cold water into a bucket, and add 3 cups of caustic soda.
You can use Drano® Clog Removers to unclog a kitchen sink, bathroom sink, shower or clogged bathtub, but DO NOT use them in toilets. For clogged or slow-running drains, apply the product and let it work 15 minutes, then flush with hot water.
So, let's recap the common reasons why a toilet won't unclog — excessive toilet paper use, non-flushable solids, hard water, and clogs in the main sewer line. Thankfully, they can be prevented via methods like double-flushing, covering the toilet bowl, routine inspections and dealing with tree roots.
Just as natural dish soap helps break down dirt, grease, and food that may be stuck on dishes and utensils, it can help break down what's in your toilet bowl. The important thing is to reach for a non toxic dish soap that, once it's flushed and enters the water supply, will be safe for animals and the planet.
In this scenario, squeezing liquid hand soap, body wash, or shampoo into the toilet should net you the same results. STEP 2: Let the soap sit for about 20 minute so it can coat and loosen the clog for maximum flushability.
Vinegar and Baking Soda Mixture
To start, completely dissolve one cup of baking soda in one cup of hot water. Pour the mixture into your blocked toilet and wait a couple of minutes. Then, pour two cups of vinegar into the toilet. Allow the vinegar and baking soda to react for at least 15 minutes.
Will a toilet eventually unclog itself? It sure would be nice, but it's fairly rare for a toilet's clog to clear up after a few hours. It can happen, but only in select circumstances.
Drano® Liquid Drain Cleaner starts working to unclog your drain on contact. After 15 to 30 minutes, clogs are substantially minimized or dissolved. A final blast of hot water flushes away what's left of the clog.
It is Extremely Corrosive For Your Drains
When your pipes are clogged, Drano will sit on top of the clog, continually reacting and generating heat until the clog dissolves. This can put a great deal of stress on your drains as the heat can cause PVC pipes to soften and even break or collapse.
For extremely slow-running drains or complete clogs, pour in entire contents of 32 oz. bottle. Allow to work for 15 minutes. For tough problems, allow 30 minutes.
Instructions: 1) Into a clogged toilet filled with standing water, dump 1 cup of baking soda. Let it sink to the bottom. 2) If the toilet doesn't have much water, add 1 gallon of boiling water to really get things moving.
In a toilet, especially since Drano does not work quickly on toilet clogs, it creates a serious issue. The heat generated from this chemical reaction can crack the porcelain of the toilet or soften the PVC of the pipes. So, not only can Drano hurt you, but it can also hurt your toilet and cause costly damage.
Damage to Plumbing Fixtures
In addition to the pipes, leaving Drano in the drain for too long can damage the plumbing fixtures. This includes the sink, shower, bathtub, and other plumbing fixtures connected to the drain. These fixtures can become corroded and discolored and can start to show signs of wear and tear.
When Drano won't go down the drain, grab a plunger instead. Many people think that these are only good for toilets. However, they can create suction that can dislodge your clog. Make sure that you get a plunger that can seal all the way around your drain.
Some of the best Drano alternatives include using a plunger or pipe snake, soap or salt mixed with boiling water, or baking soda and white vinegar. Also, for maximum effectiveness, you can combine several of these methods together to get rid of the clog.
Using a snake is also more invasive and time-consuming than using a chemical cleaner is, and can often become a dirty job. When it comes to getting at and removing major clogs or clogs that are deep down in your pipes, however, a plumber's snake is your best bet.
Drano Max Gel Drain Clog Remover
That's why the Drano Max Gel is my tried and true. I always have a bottle of this on hand because it is efficient and effective, clearing away most if not all common blockages.
Because of its corrosive nature, Drano can cause toilet bowls to crack, PVC pipes to melt or break and the glue that holds pipes together can be eaten away. If any of these things happen, you're going to be left with an inoperable plumbing system and costly repairs.
In conclusion, while baking soda and vinegar may seem like a simple and easy solution for cleaning drains, they are not actually very effective in most cases. In some cases, baking soda and vinegar can even cause damage to your pipes.