Tip: Latex paint is recommended for laminate surface painting projects because of its durability and smooth finish.
A: Like most rules, there's always an exception, so YES, you can paint laminate furniture without sanding or priming IF you use the right kind of paint. You can skip the primer if you are painting laminate furniture with chalk paint.
If you want to make a big impact in your kitchen without a big investment, consider priming and painting your laminate countertops. Your local paint store can supply you with the best type of paint to use in this project. Many recommend a water-based acrylic primer, paint and top coat.
If it's going to be rarely used and it's a high quality chalk paint like the one I used for this chalk paint dresser project, I'd say give it a go without priming…but I will remind you that it is always the “right way” to prime your painting projects no matter what.
The BIN shellac-based primer, Cover Stain primer, and clear shellac primer mentioned above all come in aerosol spray paint cans and are SO good at getting paint to stick to laminate cabinets or furniture.
Painting laminate wasn't difficult, but I did find it more time-consuming than painting wood. To sum it up, the most important steps are to sand and prime all the surfaces before painting. If you were to skip those two steps, your paint would have nothing to adhere to and would most likely peel right off.
The best way to ensure paint on laminate lasts is to sand the surface and use a good bonding primer, followed by two layers of high-quality latex paint and a durable top coat – allowing each layer to dry thoroughly before adding the next.
And, with that final layer of topcoat dry, you've given a fresh new look to an old laminate countertop. The painted surface is durable, but not quite as resistant to water and scratches as the laminate, so be sure to wipe up spills quickly and avoid scratching the paint as much as possible.
Latex or water-based paint works well on laminate cabinets if you use a good primer. But before it fully cures, the paint remains sticky and may peel off easily if two painted surfaces bump against each other. With a water-based primer underneath. latex paints may take one to four weeks to cure.
Once the cabinets are primed, you can paint them with oil-based paints, acrylic paints or melamine paints. Melamine paints are specifically designed for painting laminate surfaces, as the moisture-resistant materials in the paint make them just right for the moisture and steam so prevalent in kitchens.
The KEY to having the paint stick is to use the proper primer. I recommend using Zinsser Oil Based Primer. This stuff sticks like glue! I love their water based primer too, but when painting laminate, just go for the oil based, I feel it adheres better.
Using 120-grit sandpaper, lightly sand the laminate surface in a circular motion. Don't worry if the furniture starts to look a little dull and less glossy, this is what you want to happen. Avoid sanding too much or you might tear up the laminate from the surface, or even make a hole.
I know sanding isn't all that fun, but it really is necessary for this project. Light sanding makes sure the paint can adhere to the smooth laminate surface properly. It also knocks out any little imperfections before painting, ensuring that damage won't show through the paint.
Go for a self-priming paint that's formulated for use on glossy, laminate surfaces. This cuts out the need for special primers, reducing both expense and time.
Prime the surface using a bonding primer to ensure that your paint will stick to the laminate. Paint on at least two coats of chalk paint evenly over the entire piece of furniture; lighter colors may need more coats for full coverage.
The second option to seal the laminate is to paint the surface with an enamel paint. My favorites are Valspar Cabinet Enamel, Benjamin Moore DTM low lustre enamel, and Benjamin Moore Super Spec high gloss enamel. Each of these paints are made to adhere to almost any surface (wood, metal, glass, and more).
In most cases, it is best to use an enamel paint that is formulated for laminate flooring. If you are using a spray paint, be sure to shake the can well and hold it about 18 inches away from the surface when spraying. Apply several thin coats, allowing each coat to dry completely before applying the next one.
Eggshell No. 17 is perfect for laminate, MDF and melamine surfaces because it's hardwearing with a wipeable silk finish.
Allow the furniture to dry for at least two hours between each coat. Let the newly-painted furniture cure for a week. You can re-attach any handles or knobs to the furniture once the final coat is dry, but avoid setting anything on the furniture until it's cured for a week to prevent peeling.
Laminate is not absorbent as wood, so using a normal wood stain will not work. Using a finish to stain laminate flooring is less drastic than painting it, but the finish will need to be reapplied once the colour dulls. You also won't get the look of scratched paint.
Ideal Uses: Metal, Wicker, Concrete, Wood, Vinyl, Laminate, Plastic and, Glass.
It's easy to skip the sanding step, because sanding is a drag… but it's especially important with laminate. Because it's often somewhat glossy-looking, and important to sand it down until the finish is very dull before priming. We recommend using 120 grit sandpaper for this.