What kind of batteries does the Schlage encode take?

Author: Mr. Jovan Abernathy IV  |  Last update: Sunday, May 11, 2025

The Schlage Encode™ Smart WiFi Deadbolt requires four new AA alkaline batteries, installed on the interior side of the lock. Remove the black battery cover on the interior side of the lock by sliding it up.

Can you use lithium batteries in Schlage Encode?

We recommend using a premium alkaline battery for all Schlage digital locks. Lithium, or rechargeable technologies may cause undesirable operation. Our smart and electronic locks are equipped with low battery warnings.

What kind of battery does the Schlage be489wb2 take?

Replace them with good quality AA Alkaline batteries. Reinsert the battery tray and replace the cover. The Schlage BE489 comes in two (2) trims.

How do you open a Schlage Encode with a dead battery?

Resolution: Battery Jump Procedure: The emergency battery jump start can be used to unlock the door if the batteries are dead. WARNING: The lock will remain unlocked until you change the battery and relock the door.

How to open a Schlage lock with a dead battery and no key from outside?

Check the bottom of the keypad or the lock itself for a small jumper, usually hidden under a plastic cover, where you can connect a 9-volt battery. Use Physical Key: If your Schlage electronic lock has a key override, use the physical key to unlock the door.

Schlage Encode - Battery Change Out Guide, How to replace the batteries on the Schlage Connect

What happens if the Schlage lock battery dies?

If the battery is dead and you need to unlock the door, you can perform an emergency battery jump start. Follow these steps to perform an emergency jump start. Connect a new high-quality alkaline 9-volt battery to the contacts below the touchscreen and listen for the long beep.

How long does a Schlage Encode last?

It provides room for four AA batteries, which Schlage says can last up to six months when the lock is used on Wi-Fi or up to a year if you use it with Thread.

How do you reset the battery life on a Schlage Encode?

How do I perform factory reset on my Schlage Encode?
  1. Remove the battery cover.
  2. Press and hold the black circle reset button to the right of the thumbturn on the inside of the lock. ...
  3. Keep holding the button until the LED stops flashing red.
  4. The LED will light solid blue when the reset is complete.

Why does my Schlage Encode beep 3 times?

3 beeps usually means a operational programming error. Liked “I would do a factory reset of the lock and reprogr…” Do you have the manual so that you can do the factory reset and reprogram the lock? It should have the factory reset instructions in it.

Can you use regular AA batteries instead of lithium?

Lithium batteries typically have a higher voltage and longer-lasting power. So, if your device requires a specific voltage or has high power demands, using alkaline batteries might result in shorter battery life or reduced performance.

How long do batteries last in a Schlage lock?

How long do batteries last in Schlage locks? The battery life of Schlage locks can vary depending on factors such as usage frequency, the specific lock model, and the type of batteries used. Generally, Schlage locks are designed to have a battery life ranging from 6 months to 1 year.

Can I use lithium batteries in Schlage lock?

"Avoid using lithium or rechargeable batteries"

Our apps such as the Schlage Home App, Schlage Abode App, and Schlage Breeze App will all receive notifications from your smart lock when the batteries are getting low.

Is Schlage Encode worth it?

Is the Schlage Encode worth the money? The Schlage Encode certainly isn't a bargain-priced door lock, even by smart lock standards. At around $270, it's one of the most expensive residential locks one can install on a door. That's not to say it's overpriced, though.

What grade is Schlage Encode?

Simplify access solutions for your home. Certification ANSI/BHMA A156. 36 Commercial Grade 1 ANSI/BHMA 156.40-2015 Residential Grade AAA UL Listed for 20 minute fire door (no hose).

What kind of batteries does Schlage Encode take?

The Schlage Encode™ Smart WiFi Deadbolt requires four new AA alkaline batteries, installed on the interior side of the lock. Remove the black battery cover on the interior side of the lock by sliding it up.

How do I stop my Schlage lock from beeping?

To silence a false alarm, press the Schlage button on the interior side of the deadbolt until the sound stops.

Is Schlage Smart Lock being discontinued?

With the popularity of this newest addition to the Schlage electronic and smart lock portfolio, we have decided to discontinue the Schlage Sense™ Smart Deadbolt that was launched in 2016.

Why is Schlage so expensive?

Schlage locks tend to be more expensive than Kwikset due to its superior security features, durable materials, tight tolerances, great security pins, and robust deadbolt screws. The Kwikset deadbolt is good quality, but the quality of Schlage housing and door locks justifies the higher cost.

Do Schlage Locks have a lifetime guarantee?

Subject to the terms and conditions of this warranty, Schlage extends a lifetime limited mechanical and finish warranty and a one-year limited electronics warranty to the original consumer user (“Original User”) of our Schlage brand product (“Product”) against defects in material and workmanship, as long as the ...

When should I replace my Schlage battery?

A flashing red X means that the battery is low. This is a good time to change the battery.

Why not use rechargeable batteries in door lock?

1. Limited Lifespan: Over time, rechargeable batteries may lose their capacity to hold a charge, requiring eventual replacement. 2. Charging Time: You'll need to set aside time for recharging, which may not be suitable for situations requiring immediate access.

Previous article
What chemical kills bed bugs permanently?
Next article
How do I know if my heat is broken?