You can't cover your patio with copper sheets, but you can spray on a liquid solution of copper that will soak into the top surface of the concrete pavers. This copper will stop the growth of the pesky green and black organisms in their tracks. The easiest way to apply the copper is to buy copper sulfate crystals.
Vinegar is an all-natural solution for cleaning concrete. It kills mildew and mold, removes grime, and helps treat set-in stains. Before cleaning concrete with vinegar, it's essential to dilute it so you don't affect your sealer.
Vinegar Solution
Spraying a vinegar solution (1 cup of vinegar per gallon of water) onto the surface, saturating it fully, should kill most strains of mold. Vinegar spray can be followed by power washing or manual hand scrubbing to remove the dead mold.
Yes, vinegar is a mild acid that kills 82% of mold species. It's often used as a natural and nontoxic alternative to cleaning chemicals when it comes to killing household mold.
Spray vinegar onto the moldy surface and leave it for an hour. Then wipe the area clean with water and allow the surface to dry. Any smell should clear within a few hours. While it's safe to use on most surfaces, vinegar is unlikely to be effective at cleaning mold off of soft surfaces.
Our top pick is the RMR-86 Instant Mold and Mildew Stain Remover for its versatility and effectiveness on nearly every surface. For those looking for an eco-friendly mold remover with natural ingredients, we recommend CLR Mold and Mildew Clear.
Vinegar is a natural and safe alternative to cleaning concrete with harsh chemicals. In the case of algae and mold, it does a better job than bleach, and it is better in the long term for killing these infestations. Oftentimes, vinegar can be found in your home or garage.
For a diluted bleach solution, mix three parts water with one part bleach in a bucket. You can also use white vinegar to kill mold. Don't forget to test a small, discreet area first. Bleach and other chemicals can discolor concrete that's been colored or stained.
White vinegar will not damage your concrete. However, leaving this solution for an extended period will damage the cement that binds the concrete together. Hence, you should be careful when using vinegar on your concrete, especially if you will use this solution on polished concrete.
How Long Does It Take for Vinegar to Kill Mold? Depending on the amount of mold, let the vinegar sit on the mold at least 60 minutes before wiping or scrubbing.
Whilst vinegar will not directly dissolve concrete itself, but it will degrade the cement that binds your concrete slabs or flags together. Extended exposure to vinegar will also cause any polish or sealant on your pavers to erode over time, leading to bleaching, stains and weathering.
Water and mild dish soap is a popular cleaning solution because it's easy to find at home and it won't damage brick, but it will tackle stains. The BIA recommends using hot water for surface cleaning with a detergent. White vinegar and water, another common household cleaner, can also be used on mildew.
Mix one teaspoon of baking soda along with two cups of water and shake in a spray bottle. When thoroughly dissolved spray the solution onto the mold and scrub with a brush. Repeat if necessary. Once cleaned, wipe the area with a wet, clean cloth to remove the solution.
For really tough black mold removal, mix two parts baking soda with one part white vinegar and one part water. Stir the mixture until it becomes a thick paste. Spread your mixture liberally onto the surface and let it dry. Scrub away the black mold and stains, and wipe down with water.
Concrobium Mold Control is an innovative, market-leading product that effectively eliminates existing mold, prevents mold re-growth and eliminates musty odors with no harmful chemicals. The unique technology is used by homeowners, professional remodelers, contractors and remediators.
Using Hydrogen Peroxide to Kill Mold
Hydrogen peroxide kills mold effectively on materials such as clothing, floors, bathroom fixtures, walls and items such as kitchen appliances. Pour 3% concentration hydrogen peroxide into a spray bottle. Spray the moldy surface completely to saturate the area with hydrogen peroxide.
While it is possible to use bleach to kill mold as well, experts agree that vinegar is a much better option. Unlike bleach, vinegar can effectively kill the mold at the root, which means it's less likely to return. Vinegar is also less toxic than bleach, making it a better choice for household use.
Mix 1 cup each of vinegar and warm water into a spray bottle. Spray a cleaning cloth with the solution and gently dab the affected area until the mould is gone. Absorb the cleaning solution with a dry cloth and leave to air dry.
Scientific tests have shown vinegar to be 99.9% effective in killing bacteria. It's also approximately 90% effective against mold, which makes it a good alternative to harsh chemicals to get rid of mold in your bathroom!
Baking soda is an effective and natural cleaning agent that can help kill mold and neutralize its odor. Once the solution is mixed, pour it into a spray bottle for easy application.