"Shocking" the pool with a large dose of chlorine is the most effective way to kill the existing algae and bring your pool back to sanitary conditions. This usually works within 1–3 days, but can take up to a week if pool conditions are poor.
For an isolated algae bloom, use granular chlorine to treat it. You can also get a brush, apply algaecide to the water, and scrub. If you have free-floating algae, you'll have to shock your pool. To start, balance your pool water to get your pH between 7.1 and 7.3.
In the same way that baking soda can be a spot treatment for black algae, household borax does the same for blue and green algae. Simply use the borax to scrub away algae that's sticking to your pool walls, then use the brush to dislodge it. Follow up by vacuuming up or scooping out the free-floating algae.
Green algae, unlike its black counterpart, is a true algae; it isn't resistant to chlorine, so you can control it by shocking the pool. If you don't want to spend a lot of money on expensive pool chemicals, you can shock with household bleach.
Pools can immediately turn green after shocking when they have metals like copper in the water. These metals oxidise when exposed to high levels of chlorine which makes the pool water turn green. Adding a metal control product such as Zodiac Metal Remover will help to restore the pool water.
Use a mixture of water and white vinegar to spray down the area and kill the algae. Rinse the surface alga off the concrete with a water hose. Next, pour white vinegar directly on the surface and scrub using a brush.
You can keep it clean with a vacuum, use natural cleaning materials like baking soda or borax, and you can use natural treatments like salt or other natural products that remove minerals that algae feed on. In these ways you can keep your swimming pool clean and safe!
Along with balancing the pH levels of your pool water, muriatic acid is strong enough to kill mold, remove rust stains, get rid of calcium deposits, and clean the surfaces of your pool.
A nylon or rubber brush is the correct choice for scrubbing the sides of a soft-sided above-ground pool. A large pool brush makes quick work of the job, but you may need a smaller brush to clean corners. Once the particles have been removed from the sides of the pool, turn your filter back on and agitate the water.
Pool algae can be caused by poor filtration, out-of-balance water, low or inconsistent chlorine levels, or poor water circulation. Green, dark green, yellowish green and blue-green algae are the most common. Green algae are slimy.
Although, if you overdo the shock treatment, you risk getting green hair from chlorine due to the excess chlorine oxidizing the copper in the water. You can execute a shock treatment with a few different types of pool shock, just be mindful of how much you're using.
Can you put too much shock in a pool? SKIMMER NOTES: It's unlikely but it could happen. It would take a lot of shock to really make the water unsafe for swimming. The best way to make sure you're safe to swim is to test your pool water and make sure free chlorine levels are between 1-4ppm for healthy swimming.
But is it safe to swim in a pool with algae? Whether mild or severe, it isn't recommended. Significant amounts of swimming pool algae welcome a breeding ground of harmful bacteria that feed on algae. These bacteria pose health risks to swimmers, most commonly resulting in a skin rash.
The presence of too much algaecide can lead to a foamy pool water. Small bubbles will begin to be produced as the water is pushed through the return jet and back into the pool. Do not confuse these bubbles and foam with another common problem, which is air in your pool lines.
Results in 24 Hours
Non-foaming formula works fast to kill pool algae.
The HTH Ultimate Algae Guard is the one that is added every 90 days, it is a copper based algaecide.
White vinegar and a little scrubbing with a brush is a very effective, eco-friendly way to remove rust stains from concrete—even those that are decades old. Pour the white vinegar directly onto the stain, allow the liquid to penetrate the area for 20 minutes, and scrub with a stiff-bristled brush.
Vinegar is acceptable to use for killing algae and cleaning a pond when it is drained. The acidic is good at lifting away the stubborn algae deposits and stains without damaging the liner material. When used in this way in limited amounts, the leftover vinegar residue won't hurt the fish or change the pH of the water.
Treat Your Concrete And Tile With A Waterproof Sealant
The quickest way you can prevent algae buildup is by having a sealing solution applied to your outdoor areas. By investing in this kind of treatment, you can discourage algae growth from having the chance to even begin.
Baking Soda and Green, Blue, or Yellow Algae
You'll need to use an algaecide to kill the algae and superchlorinate your pool to clear the water. After this treatment, test your pH and alkalinity and add baking soda to raise alkalinity to at least 100 ppm and pH to between 7.2 and 7.8.
A clarifier requires less work and less water but can take to two to three days to achieve the results you are looking for.
A fiberglass pool in its worst condition can be algae-free in 24 hours. For a vinyl liner pool, the process can take 3-4 days. For a concrete pool, this can take a week or more.