Removes even the toughest toilet stains including lime and rust.
Tolex is a strong hydrochloric acid based toilet descaler and cleaner containing special additives to aid penetration. Tolex contains hydrochloric acid making it a more effective toilet descaler than most alternative products.
White vinegar is a common household product. It makes for an excellent ally when it comes to descaling toilets. The mild acid can dissolve limescale and disinfect. All you need to do is pour a generous amount of white vinegar down your toilet bowl, let it soak in overnight, then scrub with a brush.
Pour white vinegar into the bowl to cover the stained areas. Let the vinegar soak for 30 minutes to an hour. Scrub the stained areas with a toilet brush. If the stains persist, sprinkle baking soda on the remaining stains and let it sit for up to 10 minutes, then scrub again with the toilet brush.
Muriatic acid is the professional grade solution for removing stubborn scale deposits in toilets.
While hard water stains are certainly difficult to remove, they are not permanent. There are several effective, non-toxic cleaners you can use to remove pesky hard water stains from your toilet bowl, including baking soda and vinegar, Bon Ami or Bar Keepers Friend, and borax.
Our favorite, editor-approved toilet bowl cleaner is the Lysol Power Toilet Bowl Cleaner. It's an easy-to-find cleaner that works great on tough stains, has a clean scent, and lasts for a long time.
While it can be put to a number of helpful uses around the home, WD 40 is particularly good at softening rust and limescale deposits in the toilet (and bathroom). All you have to do is spray it on the desired section of the toilet, wait a few minutes, then scrub it away with a toilet brush.
Pour a half-cup of bicarbonate soda in the bowl, and let it sit there for 15 minutes. “Apply white vinegar on top of the baking soda. This causes a fizzing effect that activates the acids and can dissolve even the most stubborn limescale buildups. After about 10 minutes, use a scouring sponge to scrub the toilet bowl.
Baking powder is an effective and environmentally friendly way to remove urine stains in toilet bowls. The citric acid in lemon juice works an effective and somewhat milder alternative to the acetic acid in vinegar. It is kind to surfaces and is very effective for light urine scale.
Pour Vinegar Into The Toilet: It may sound strange, but vinegar is a great solution for limescale because of its acidic chemical properties that eat away at calcified limescale. Make sure to coat the entire bowl and any surfaces affected by vinegar.
TM 11 is one of the strongest Acid Descalers available and although safe to use, as with most strong chemicals TM 11 requires caution when using, handling and storing.
Clorox Toilet Bowl Cleaner with Bleach: A 24 FL ounce bottle requires 6-8 ounces per use, highlighting a need for a substantial amount to tackle tough stains, including hard water marks. Don Aslett's Safety Foam: Standing out with a large 32 FL ounce bottle, Safety Foam recommends only 1-2 ounces per use.
Professional cleaners often use the same household supplies as you would: toilet-bowl cleaner (or bleach), disinfectant wipes, rubber gloves, as well as a nonscratch scrub sponge, a microfiber cloth, or paper towels. A handheld scrub brush or a pumice stone can get to especially tough stains.
Vinegar and baking soda: Add 1 or 2 cups of vinegar to the toilet bowl along with a few sprinkles of baking soda. Swish the solution around the bowl with your brush for a few minutes and then let it sit for about 15 minutes. Scrub the stains with your brush (or pumice stone).
Kaboom is now OxiClean. New look, same powerful clean.
Everything you love about Kaboom™ bathroom cleaners isn't going away – it's just merging with OxiClean™.
Use vinegar or another acidic cleaner to clean calcium buildup from your toilet. The acid will break down the mineral deposits so you can brush them away. Be sure to take the necessary safety precautions when working with cleaners. Wear gloves and eyewear and open windows for ventilation.
If CLR Grease & Oil Remover is left on a surface for too long it begins to dry and can be very difficult to remove.
The acidic values of vinegar allow it to soften limescale and prepare it for scrubbing clean. Pour undiluted white vinegar into your toilet bowl, making sure you get it up under the rim where limescale often gathers and cover every part of the surface. Leave it for three to four hours and then scrub it with a brush.
So, which one should you go for? It really depends on what kind of cleaning you need to do. If you're dealing with really tough, built-up mineral deposits, especially in your bathroom or kitchen, CLR might be the way to go. It's strong enough to handle stains that vinegar might struggle with.
A mild, natural acid, such as lemon juice or vinegar, can be very effective at nipping calcium deposits in the bud. Depending on the severity of the stain, the liquid might have to be reapplied and scrubbed vigorously several times with sandpaper or a rag.
Two of the most effective substances are lemon juice and ordinary vinegar. Lemon juice is usually the best (and will also leave a lovely smell behind). Stronger pickling vinegar and lime juice are both even more acidic and can be used for really stubborn deposits.