What is ADA counter height? ADA-compliant undercounter refrigerators, ice makers, and freezers are designed to fit under 34” high countertops, with most products being 32 inches high. Standard counter height is 36”.
The minimum elevation should be 34 inches.
I usually put the ice maker box about 12" above the floor unless it is a Sub-Zero or GE Monogram in which it is installed in a closet or other room. It's not a bad idea to install it in another room in case the ice maker malfunctions and leaks.
The icemaker can be at any height. I usually see it just above floor-level, but I'd probably install mine at about 36" (with the electrical outlet above and off to the side of it). It'll be easier to keep the hose from getting caught underneath when you slide the fridge back. properly reinforcing a cut joist .
Typically, most ice machine manufacturers require around six inches of clearance above the machine to ensure adequate airflow. Ensuring the proper clearance requirements are met during installation is crucial for the efficient performance and longevity of your ice machine.
Typically, 24 inches to 48 inches off the ground tends to be what most electricians will do. Ideally, the outlet should be positioned at a height that allows you to access it comfortably. This prevents unnecessary bending or stretching when you need to connect or disconnect the refrigerator.
AVOID CENTRAL PLACEMENT Place the ice maker on the periphery of the kitchen, away from common seating or dining areas.
ice and water dispensers. If there's an existing cold water supply line extending from the wall or up from the floor, connect the supply valve to the refrigerator valve with your 1/4-inch water line supply tubing.
This space prevents sewer water from backing up into the industrial ice maker or commercial ice bin should a problem arise with the floor drain, giving it room to drop back into the pipes. A typical air gap is 2 inches, but your local city health code may require a longer gap.
Floor mounted food equipment that is not easily moveable shall be sealed to the floor or elevated on legs with a minimum height of 6 inches.
Under counter ice makers are the same height as a dishwasher - approximately 34 inches tall - but are usually narrower than a dishwasher at around 15 inches wide and are 24 inches deep to fit flush with other surrounding base cabinets.
Manufacturers like Hoshizaki recommend you never install your ice machine on a GFCI outlet.
If your freezer has an arm lever, make sure it's pushed down. If the arm is up, your ice maker won't make any new ice.
Plastic is easier to cut and work with, while copper is more robust and long-lasting. Then there's the unusual taste factor. There has been reports of a plastic taste in drinking water or ice cubes by a number of plastic line users. With copper piping, you won't have that difficulty.
But if you decide that learning how to install an ice maker water line isn't in your wheelhouse, don't stress. The cost for a plumber to install a water line for an ice maker is usually under $200.
Copper and plastic are two of the most common materials when it comes to ice maker water lines. Copper lines are durable and can withstand all of the pressure from the water. They also last much longer and are resistant to corrosion and can be easily managed.
Sadly, with every piece of equipment comes a lifespan. With proper cleaning, a quality ice machine will last around 4 to 5 years on average, sometimes even longer. So how do you know when it's time to replace your ice machine? The first thing you need to do is locate the problem.
Most ice makers can be left on all the time in order to ensure that you always have a fresh supply of ice. Like refrigerator ice makers, these appliances are typically designed to run constantly.
You will have to get a licensed plumber, or someone who is extremely adept in plumbing work to tap into the cold water pipe, install a shut-off valve, and run a length of, preferably, copper tubing to the rear of the refrigerator.
There is the possibility that another outlet could inadvertently trip the GFCI circuit, thus causing a power loss to the refrigerator/freezer. In any scenario, with a GFCI outlet connected to a GFCI circuit, there is a high chance for an inadvertent power loss to the appliance.
Standard refrigerator sizes range from around 24 to 40 inches in width, 62 to 72 inches in height and 29 to 36 inches in depth. Generally speaking, French door and side-by-side refrigerators will be larger in width and height, though counter-depth models are frequently available in these two configurations.
There aren't official height requirements outlined by codes like the National Electrical Code (NEC), but NEC 210.52. A. 2. states, “A common height for a wall outlet is between 12 to 16 inches to the bottom of the device.