Most of the smallest in-ground pools across all pool types, on average, are around 12' by 24', 10' by 15', or even a 10' x 10' Spool/Cocktail pool! In-ground pools can be even smaller.
The average cost for installing an in-ground pool is $45,583, with a typical range between $32,408 to $60,873. A small, low-end in-ground pool installation project may cost as low as $21,500, while some homeowners may pay as much as $135,000 or more for a luxurious backyard oasis.
While the sizes and dimensions of pools vary, anything that's about 10 feet by 10 feet or smaller is typically considered a small pool. In terms of depth, three feet is standard for soaking and floating, and four to five feet and above is the best depth for lap pools. From there, it's up to you.
Smaller pools are often called cocktail pools or plunge pools, depending on their dimensions and depths.
10 x 20 is considered a small in-ground pool, while a 20 x 40-foot pool is on the larger side of things.
A plunge pool is a small pool which is defined by a number of characteristics: Usually between 2 and 6 metres long, although it can be up to 7 meters in length. Between 2 and 3.5 metres wide. Often no deeper than 1.2 metres, although this varies greatly.
A 12x24 foot pool has a surface area that covers 288 feet, so it should be big enough for your needs based on this rough calculation.
The smallest Endless Pool has a swimming area 7 feet wide by 14 feet long and 39 inches deep (the standard depth of a lap pool.) It can be customized to 78 inches deep for standing exercises. The pools can be as large as 10 feet by 20 feet and have two swimming channels.
Making a pool shallower is a faster and easier process, but both options are possible. The pool company will drain your pool to adjust the depth. To make a pool shallower or deeper, workers will first remove the bottom either with machinery or by hand. Then, they'll add or remove fill to reach the desired depth.
For either a custom-built pool or a prebuilt liner shape, the most affordable inground pools are those with the least-interesting shape—those with a rectangle or an oval shape will generally be the most inexpensive.
For example, the smallest fiberglass pool we currently offer is the R20, which is 10 feet wide and 20 feet long. This swimming pool has bench seats on both ends and a spacious open interior. The next smallest size that we offer is a 12x24 foot swimming pool, the R24.
Cocktail pools tend to be less than 400 square feet and provide an ideal solution for homeowners with limited outdoor spaces. Sometimes called "spools" for a small pool that combines a pool and a spa, these cocktail pools often include heaters, jets, and benches.
Changing the Shape or Size
Changing the shape of your pool starts at $30,000 for a vinyl pool and $60,000 for a concrete (gunite) pool.
Maybe you bought a house with a pool that is not large enough to accommodate your needs, or maybe it has a shape that you don't particularly enjoy and you would like to renovate. Whatever the reasons, Neave Pools is here to help. Enlarging a swimming pool or adding a spa can be a large undertaking.
Mix together more concrete, two bags at a time, inside the pool to make it shallower. Pour the concrete into the bottom of the pool, starting at the deep end, directly from the mixer. Slowly build up the depth by pouring in concrete and swirling it smooth with a trowel.
The Original Endless Pool measures 8 feet by 15 feet (about 3 meters by 5 meters). It's recommended that you have at least a 10 foot by 18 foot space to install the pool. There are some models that can fit 2 swimmers at a time!
An aboveground "endless" lap pool, functioning like a treadmill but for swimming, enables the homeowners to get plenty of exercise, even in their relatively small yard.
Swim spas by Master Spas are 8 feet wide, while length varies based on the model, from 11 feet to 19 feet. You need to plan for space to get in and out of the swim spa, as well as allow for clearance for service. Master Spas recommends allowing for three feet on each side of the swim spa.
We recommend a minimum of 30 feet in length to provide enough space for lap swimming and exercise. The swim lane is important, but so is the depth and other features.
For a family of 8 people, a pool size of 18 by 36 feet is adequate. Even if you all decide to swim at the same time, there will be enough space for everyone. A rectangular shape is the best choice for this size of the pool. If there are six or less in your family, a pool size of 16 by 32 feet will be sufficient.
It will be a snug fit. If I go with a 21ft pool, it will be no problem. Obviously I would have 1 1/2ft extra from the septic and property line. That would give a foot more away from the pine trees.
The most obvious benefit to a plunge pool is that they enable people who do not have space for a traditional swimming pool to fit a pool in their yard. The smaller size also naturally means that plunge pools are cheaper to buy and install, and they are cheap to operate with heating, filtration, and cleaning.
Yes, pool steps can be added to any inground swimming pool. There are several types of inground swimming pool stairs to choose from, such as drop-in steps and built-in steps.
Above Ground Pool Depths
However, many pool owners would like to have the ability to go deeper than 4 feet. Luckily, above ground pools can have both shallow and deep ends, just like an in-ground pool.
The floor slope shall be a maximum 1 unit vertical in 10 units horizontal and a minimum of 1 unit vertical in 60 units horizontal in areas 5 feet (1524 mm) deep or less. The floor slope shall be a maximum 1 unit vertical in 3 units horizontal in areas more than 5 feet (1524 mm) deep.