The GWP for R-134a refrigerant is 1,430, making it 1,430 times more harmful than carbon dioxide when released into the atmosphere. There are three refrigerants that can be used to replace R-134a: R-1234yf, R-152a, and R-744.
Some notable substitutes for R134a [10] in AAC based on the preceding studies are R1234yf [[11], [12], [13], [14]], R1234z (E) [[15], [16], [17]], R152a [[18], [19], [20]], R290 [21,22], R744 [[23], [24], [25]], R430A [26,27], and R444A [28], etc.
A High-Performing Alternative to R-134a
Opteon™ XL10 (R-1234yf) refrigerant is a non-ozone depleting (ODP) hydrofluoroolefin (HFO) option that meets the industry's growing demands for sustainable, safe, and effective solutions.
A Next-Generation R-134a Refrigerant Alternative
Opteon™ XP10 (R-513A) refrigerant is a non-ozone depleting potential (ODP), low global warming potential (GWP) hydrofluoroolefin (HFO) based replacement for R-134a.
Possible alternatives to R-134a
Attention is increasingly focused on low-GWP refrigerants that are hydrofluoroolefins (HFO). R-1234yf in particular is often seen as a possible alternative to R-134a. The GWP value of R-1234yf is 4, which means it has a very low global warming potential.
While R-1234yf could be the perfect replacement for R-134a, there is one major challenge with this new technology. The R-1234yf is much more reactive than R-134a. On the positive side, this higher reactivity is why R-1234yf is so much more friendly to the environment.
With the scientific approach to reduce the global warming potential (GWP) of the refrigerant R-134A (i.e. 1430), the refrigerant R-513A with GWP of 631 is the drop-in replacement.
In the United States, vehicles produced after 2021 no longer contain R-134A in the air conditioning system. In other parts of the world, including the United States, there are restrictions around using 1,1,1,2-tetrafluoroethane. Specifically, in California, retailers can deny selling customers canned R-134a.
Also, substitutions are often not without problems. For example, when replacing R22 with R134a, there are many problems that cannot be replaced directly; the cooling power of R134a is 60% lower than that of R22, which means that the condenser of the system must work overtime to achieve the same cooling capacity.
The test results conclude that the blend R134a/R32 at a mass fraction of 85/15 can be a drop-in replacement for R134a refrigerant.
HFC-134a will no longer be allowed in nonroad vehicles as of January 1, 2028. Servicing of existing vehicles using HFC-134a with HFC-134a will not be impacted and will continue to be allowed.
Hcfcs R134A Hydrocarbon Replace, Packaging Type: Cylinder at ₹ 190/piece in Mumbai.
You're wondering if you can mix different refrigerants for your air conditioning system. The short-long-only answer is no, never. There are many reasons why it's impractical, illegal, and not economical for a homeowner to mix refrigerant types.
According to its manufacturer, Chemours, use of R-1234yf has grown so much since the refrigerant replaced the long-established R-134a that it's now used in 95% of new cars sold in the U.S. An estimated 220 million cars on global roads are also using it.
R134A - Tetrafluoroethane. Commonly used. This refrigerant is ozone friendly but is a potent greenhouse gas and and such will be phased out in the future. It was introduced as a replacement for R12 which was highly ozone depleting.
A: If the refrigerator is designed for 134a, yes it can be used with the right equipment for charging.
The GWP for R-134a refrigerant is 1,430, making it 1,430 times more harmful than carbon dioxide when released into the atmosphere. There are three refrigerants that can be used to replace R-134a: R-1234yf, R-152a, and R-744.
The R407c refrigerant is the best suitable for R22 and R134a refrigerant in the future construction of the heat pumps. As the complete replacement of refrigerant needs system redesign, In the current work R407c has been blended with R134a and the performance and energy consumption patterns are studied.
R1234yf, or HFO-1234yf, was introduced in response to environmental concerns over the continued use of HFC-134a. This newer refrigerant is a hydrofluoro olefin (HFO). It has a much lower global warming potential (GWP) compared to HFC-134a.
R513A was developed as a replacement refrigerant for R134a. R513A is a modern, non-flammable refrigerant designed to replace R134a in a wide range of applications. It provides a sustainable solution for both new systems and retrofits.
R-404a, R-507 as well as R-134a, which is mainly used in vehicles, also have high GWP values (3,920, 3,985 and 1,430, respectively). R-134a was banned years ago from air-conditioning systems in new passenger cars since it escapes relatively easily from those types of systems.
Small cans of non-exempt MVAC refrigerant (i.e., containers designed to hold two pounds or less of refrigerant) that have unique fittings, and self-sealing valves can continue to be sold to persons without certification for DIY use on their vehicles.
The answer is no, refrigerants should not be mixed. There are several reasons why mixing refrigerants should not be done. At LA Construction, Heating and Air we do the right thing for our customers which means never cutting corners.
Internal heat exchanger for R1234yf refrigerant (photo: NRF) As you can see from the above description, R134a and R1234yf refrigerants are not completely identical and their substitution will always result in faster degradation of the A/C system and eventually lead to costly repairs.
The chemical stabilities of copper, steel, and aluminum have been tested and confirmed as acceptable for use with Freon™ 134a and lubricants. Acceptable plastics and elastomers have been found for use with existing CFC refrigerants.