Always begin scrubbing under the bowl rim first with the toilet brush. The water jets can get clogged and may require additional cleaning steps to be sure that the toilet is getting enough water to flush properly. Next, scrub the bowl including the drain hole opening at the bottom of the bowl to remove stains.
He said: “The golden rule for cleaning toilet bowl stains is to use non-alkaline products. “Most toilet bowl stains appear in hard water areas, so it's important to remember that bleach won't work, and you will need to use an acid-based product such as limescale remover.
An automatic flush system that is paired with an inline sanitizer is the most effective way to clean a toilet bowl after each individual uses it. Every time a user leaves the stall, the toilet flushes and the entire bowl is rinsed with a cleansing solution.
Pour white vinegar into the bowl to cover the stained areas. Let the vinegar soak for 30 minutes to an hour. Scrub the stained areas with a toilet brush. If the stains persist, sprinkle baking soda on the remaining stains and let it sit for up to 10 minutes, then scrub again with the toilet brush.
People should still flush their toilets at least once a day. "Things like to grow in urine and after a while the chlorine will inactivate in the toilet bowl water. It will being to bubble away and things will begin to grow. The odor will increase so it can get disgusting, smell bad and stain your toilet," he said.
Professional cleaners often use the same household supplies as you would: toilet-bowl cleaner (or bleach), disinfectant wipes, rubber gloves, as well as a nonscratch scrub sponge, a microfiber cloth, or paper towels. A handheld scrub brush or a pumice stone can get to especially tough stains.
The reason vinegar works to dissolve minerals is due to its acidic nature. Plus, mixed with the baking soda that loosens up greasy or oily stains, your toilet will surely be shiny and clean in no time.
Following a systematic order for cleaning your house can make the task more manageable and ensure a thorough job. By starting with decluttering and moving through dusting, disinfecting, vacuuming, mopping, and specific room cleaning, you create a clean and organized living space.
The product works by breaking down mineral buildup and rust pretty quickly, so leaving it overnight doesn't necessarily make it more effective. In fact, it could damage your toilet if it's left too long - especially overnight. You should only let it sit for just two to five minutes, depending on how bad the buildup is.
The only three things you can safely flush down the toilet into the sewer system are the three Ps —pee, poop and (toilet) paper. Nothing else. Remember: Wipes clog pipes. Even if it says "flushable" — it's not.
Start at the top and spray the tank, handle, and bowl edges. Give the product a few minutes to work and wipe the surfaces with a cloth or paper towel. Finally, wipe down the entire outside of the bowl. Start with the sides and front before cleaning the bottom edges of the toilet where it meets the floor.
Ideally, the toilet seat should face the north or south direction. This positioning is believed to channel negative energies away from the bathroom space. Avoid having the toilet seat face the east or west, as it is thought to invite negative influences.
Knock out the dirtiest job first. Get at toilet bowl germs and grime with Original Pine-Sol® to disinfect while you clean the rest of the bathroom. Dirt, mildew, and soap scum like to linger behind after the suds rinse down the drain. Use Pine-Sol® on shower tiles, walls, fixtures, and even plastic shower curtains.
Put on your rubber gloves. Coat the toilet bowl's entire interior, starting underneath the bowl's rim, with a product formulated to clean and disinfect, like Clorox Toilet Bowl Cleaner with Bleach. Use your toilet brush to scrub away stains and deposits.
Simply pour a kettle of almost boiling water into the bowl, follow up with 250ml of citric acid, and leave it for some hours – preferably overnight. The next day, scrub and flush. What's good for those caked-on pots and pans after cooking dinner is also good for removing a brown stain on the bottom of the toilet bowl.
Scrub the entire surface with your toilet brush, paying special attention to any stains or buildup. Make sure to clean underneath the rim, which is a hot spot for bacteria and mineral deposits. Flush the toilet to rinse away the cleaner and any loosened dirt, grime, and mineral deposits.
Urine and hard water deposits leave hardened mineral deposits around your toilet bowl over time. These deposits form faster when you let pee sit around. In some cases, rings left for too long can be nearly impossible to remove without harsh cleansers that can be worse for the environment than those extra flushes.
After flushing, wash your hands thoroughly with soap and water, as germs are still on and around the toilet lid. If you think a flushed toilet is clean, there is bad news for you. Over 1 million bacteria stay alive after a toilet is flushed!
Not flushing toilet is a bad thing because it allows bacteria to grow, creates mineral buildup, and can even lead to clogs in your pipes.
Essential Supplies for Bathroom Cleaning
All-purpose cleaner: For countertops, sinks, and surfaces. Glass cleaner: Ensures mirrors and glass are streak-free. Disinfectant spray or wipes: Perfect for sanitizing high-touch areas. Toilet and shower cleaners: Removes stains, bacteria, and soap scum.
If you use all-natural cleaners, you can shower right away. However, if they're packed full of chemicals, it's better to wait a while before showering and allow the bathroom to ventilate, says Rubino. Follow House Beautiful on Instagram and TikTok.