Currently, most salons use barbicide solution as a disinfectant, which is highly toxic to humans (Sources of Salon Hygiene, Proper Practices for Sanitation, Disinfection, and Sterilization).
BARBICIDE® is known worldwide as the ultimate product for EPA registered disinfection in salons, barbershops and spas. The iconic blue liquid is trusted and effective earning its reputation for creating a safe and clean salon.
In salons, two common types of disinfectants used are alcohol-based disinfectants and quaternary ammonium compounds (quats). These disinfectants are crucial in maintaining a clean and hygienic environment to ensure the safety of both clients and salon professionals.
BactroKill C3- Meets state infection control regulations for Cosmetologists. C3 kills germs in 60 seconds. C3 will eliminate bacteria, fungus and virus including the Coronavirus (when used according to the manufactures directions for Canine Parvovirus) and is featured on the EPA N List.
Chlorhexidine and povidone-iodine are the most common disinfectants used in preoperative skin preparation.
The most commonly used method of disinfection in a salon involves chemical disinfectants, particularly those containing chlorine. Disinfection is crucial in these settings to ensure the inactivation of most microbes on the surface of fomites, such as tools and equipment, while not achieving complete sterilization.
Prevention Disinfectants are the Highest Standard in Disinfectants for spas and salons for 3 reasons: Fastest – Prevention offers EPA-Registered hospital-grade disinfection effective in 1 minute! Up to 10x faster than competitor disinfectants.
Barbicide products are the gold standard for salon and spa disinfection for good reason. In the beauty and hospitality industries, maintaining a clean and hygienic environment is of paramount importance.
The two categories of chemical relaxers commonly used by cosmetologists are hydroxide relaxers and ammonium thioglycolate (thio) relaxers.
CHLORINE.
Chlorine is the universal disinfectant, active against all microorganisms. It is generally served in the form of sodium hypochlorite, with different concentrations of free chlorine. As a general disinfectant for all types of laboratory work, a concentration of 1 g/l (1000 ppm) of free chlorine is used.
Disinfection can be done using chemical agents – liquids, gels – or physical methods, such as UV radiation, hot air, or steam.
Clorox (chlorine bleach) is a preferred sanitizer in restaurants because at the correct titration it is very safe for food surfaces, utensils, and service wares. Clorox is actually packaged for commercial use, but large food purveyors also have their own labels, generally at lower prices.
It signifies a safe, clean environment for everything from a haircut to a pedicure. All BARBICIDE® products are EPA Registered disinfectants, designed to meet the needs of state boards and assures consumer disinfection is an important part of your business. Deena R. Barbicide is my go to product of choice.
Barbicide is a disinfectant solution used by barbers and cosmetologists for disinfecting grooming tools such as combs and hair-cutting shears. Manufactured by King Research, it was invented in 1947 by Maurice King and marketed heavily around the United States by his brother James.
Barbicide is a staple in salons, known for its distinctive blue hue. It's a powerful disinfectant that kills bacteria, fungi, and viruses on non-porous surfaces and tools.
Barbicide Fileside Disinfectant Spray 250ml.
The most commonly used chemicals as primary disinfectants are chlorine, chlorine dioxide and ozone. Among them Chlorine is the most widely used primary disinfectant throughout the world.
Like any disinfectant used on metals, spray until thoroughly wet, allow to sit for 10 minutes, then rinse with clean water and dry completely with a paper or freshly washed towel.
BARBICIDE concentrate is normally mixed 32oz water to 2oz BARBICIDE concentrate. For the spray we are splitting that in half, 16oz of water to 1oz of BARBICIDE Concentrate Safe for all non-porous surfaces!
Bleach is a strong and effective disinfectant – its active ingredient sodium hypochlorite is effective in killing bacteria, fungi and viruses, including influenza virus – but it is easily inactivated by organic material.
You must use a disinfectant that is registered with the EPA for use in a hospital setting and is labeled as bactericidal, virucidal, and fungicidal.
We recommend a combination of products that are gentle yet effective. Start with a 50/50 vinegar and water solution to thoroughly clean surfaces. Disinfect with a therapeutic-grade essential oil spray (though we recommend the 10% bleach solution for a deeper clean every night).