Calcium Limescale & Rust Remover, more commonly known as CLR, is a household cleaning product used for dissolving stains, such as calcium, lime, and iron oxide deposits. Its main ingredients include water, lactic acid and gluconic acid.
DO not use CLR on natural stone or marble, terrazzo, colored grout, painted or metallic glazed surfaces, plastic laminates, Formica, aluminum, steam irons, leaded crystal, refinished tubs or any damaged or cracked surface. CLR may etch older sinks, tubs and tiles. CLR is corrosive.
No. The two products have different ingredients and, as is true with any cleaner, should never be mixed with another cleaner.
CLR uses similar ingredients to Lime Away. Actually, “Lime-A-Way” is the proper name, but aren't those hyphens awkward? Anyway, the ingredients – Lime Away uses sulfamic acid while CLR uses a combo of lactic acid, gluconic acid, and a few other solvents.
Safe for various applications and surfaces… (tubs, showerheads toilets, sinks, porcelain, glass, cement, stucco, brick, stainless steel, and much more)!
How do you clean a badly stained toilet? White vinegar is a good remedy to clean stubborn toilet stains. Pour a 120ml bottle of white vinegar into the toilet bowl and put down the lid. Don't use or flush the toilet for eight or so hours, then use a toilet brush to scrub.
Don't mix CLR with other household cleaners or bleach.
Mixing acids with bleach creates toxic chlorine gas. Mixing with other household chemicals can also result in toxic fumes.
Hard water stains can look pretty unsightly if they are not tackled, making the toilet looking dirtier than it actually is. You can also spray WD 40 in the bathroom or sink to deal with the same issue. It will get rid of hard water stains and limescale and make your toilet look much brighter.
Use in sinks, toilets, showers, drains, garbage disposals and grease traps. Fragrance free- safe for all pipes and drains! Part of the EPA's Safer Choice Program recognizing the product as a safer alternative to traditional chemicals, and contains no phosphates and is Septic Safe.
CLR may etch older sinks, tubs, and tiles. Avoid contact with wood, clothing, wallpaper, carpeting, natural stones, brass, copper, aluminum, galvanized metals, any painted, coated or sealed surfaces. Clean spills immediately.
The Evapo-Rust Rust Remover earned our best overall pick because it's incredibly effective at removing years' worth of rust build up in just one application. The water-based formula is organic and non-toxic, so you won't have to worry about damaging surrounding materials like plastic or rubber.
CLR Calcium Limescale and Rust Remover is the perfect solution. Before you get started, always use gloves and check if CLR is suitable to be applied on the material you are trying to clean.
FIRE AND EXPLOSION HAZARDS: None known. Steps to be taken in Case Material is Released or Spilled: Avoid contact with skin and eyes Small Spill: No special clean-up procedure is necessary for small (less than 1 gallon) spills. Flush spill area with water. Wear rubber gloves.
So does coke remove limescale? Yes. The acid in coke will help to dissolve limescale and there are several examples of it being used to clean toilets, descale kettles and in other circumstances.
Lemon juice and vinegar
Getting rid of limescale doesn't require expensive cleaning products! Lemon juice and vinegar can help you tackle most of your limescale problems — a win for your pocket and for the environment.
spraying the effected area with undiluted white vinegar. creating a mix of white vinegar and borax to scrub affected surfaces. lime water and water in a 50:50 ratio. Baking soda.
As one of the best mold and mildew stain removal products, CLR Mold & Mildew helps combat unsightly mold and mildew stains, saving you time and energy.
Hydrogen Peroxide and Vinegar
“Combining these two creates peracetic acid or corrosive acid, an irritant that, in high concentrations, can harm the skin, eyes, throat, nose, and lungs,” says Bock.
Cleaning with a mixture of baking soda and vinegar in the bathroom can work really well. To clean your toilet with vinegar, pour a cup of vinegar in the toilet bowl and let sit overnight. The next morning, sprinkle a little baking soda into the bowl, scrub, and then flush clean.
Use Coke specifically when you need to remove problem stains like limescale or rust. If you want to avoid the risk of tinting your toilet with Coke, a light-colored carbonated soft drink such as 7UP or tonic water will also suffice.