The classic and easiest method is to wash your paving slabs with warm water mixed with dish soap, rubbing it in with a brush before rinsing it with water and allowing it to dry fully.
Water and mild dish soap is a popular cleaning solution because it's easy to find at home and it won't damage brick, but it will tackle stains. The BIA recommends using hot water for surface cleaning with a detergent. White vinegar and water, another common household cleaner, can also be used on mildew.
Usually, hosing them down once a month is sufficient. Use soap and water, if the pavers are still dirty after sweeping and water hosing, make a solution of soap and water. You can use dish soap, laundry detergent, or any type of general-purpose cleaner. Never use bleach on your pavers, as it can damage the surface.
To clean paver slabs, you can use a detergent, such as Dawn, or a vinegar-water solution that is gentle enough to effectively clean without causing damage to your concrete pavers.
Use a specialist cleaner
Try a specialist cleaner like Wet & Forget, at Walmart, which you spray onto the surface of the paving and leave. It can also be used on steps, fountains, patio umbrellas and other smaller outdoor areas. It's bleach-free and non-acidic but will remove mold, moss and grime without any scrubbing.
White vinegar is good for cleaning pavers, though it's also acidic enough to erode the stones' surface. Diluted vinegar can be used safely to clean paving stones, though it should be used sparingly and infrequently to protect your paving from damage.
It is common to mix bleach with water; however, you can also add other ingredients to make it more effective. Similar to cleaning pavers with muriatic acid, avoid an intense concentration of bleach, as it can damage the pavers.
Mild detergent and water. If your pavers aren't too dirty, this can be a quick and easy way to clean them without any fancy equipment. Mix some mild dish soap with water in a bucket to create suds, then use a brush or a sponge to scrub the surface of the pavers.
Wash patio slabs with white vinegar
This eco-friendly solution is made up of equal parts vinegar and water, which is then left to soak into the patio to correct any discolouration and also remove tough marks. You should first move all plants and furniture out of the way, then sweep the area to remove any moss.
Rinse with warm water and wipe off with a soft cloth. This method is best for cleaning small areas, like the brick trim around a fireplace. For larger areas like a floor or wall, go with natural cleaner two, vinegar. Mix equal parts vinegar and water and pour into a spray bottle.
You can use Simple Green Oxy Solve Concrete and Driveway Cleaner to clean brick walls, pavers, patios and more with or without a pressure washer. It removes oil, grease, grime and most stains and discolorations. Its biodegradable formula is safer for lawns and pets.
A mix of water and vinegar is a great combination to remove stubborn dirt and stains. If you want even better results, use this mix with a cleaner solution specific made for pavers or soap and water. Just remember to plan your cleaning on sunny days because if it rains, you might need to redo all the work.
If your deck is made from concrete, pavers travertine, brick, stamped concrete or composite decking, you can clean and refresh it for summer using OxiClean™ Versatile Stain Remover.
OxiClean is a powerful concrete cleaner that works well on various materials, including pavement and grout. This concentrated solution provides excellent cleaning without leaving residue.
The simplest path to reviving tired pavers is to apply an acrylic-based semitransparent concrete stain, such as Behr Premium Semi-transparent Concrete Stain ($27/gal.; Home Depot) or Valspar Semi-transparent Concrete Stain ($28/gal.; Lowe's).
Simply put, black stains on flagstones are caused by certain types of mold and mildew. These fungi find their way onto the stones either from their spores landing on the stones or from simply extending onto the stones from patches of mold or mildew right beside them—a pretty common occurrence for garden pavers.
CLEAN PAVERS WITH SOAP OR DETERGENT
Directly apply dishwashing soap or laundry detergent to the smudge and let it sit for at least 2 hours or longer if time permits. Reinforce it by pouring dish soap and water mixture. Use a bristle brush to scrub your paver lightly.
Although bleach is great at the whitening effect, you can use peroxide to achieve this. Hydrogen peroxide is an oxygenated bleach. It is safe for plants, so when you rinse this solution, it won't harm anything. It works together with the dish soap and baking soda to remove dirt and whiten dirty concrete.
Apply the Simple Green solution. Allow the product to soak for a minute or so on heavy soils and greasy spills. Scrub, if necessary. Scrubbing with a soft bristle brush or non-abrasive scrubbing pad provides agitation that will help to loosen soils and will ensure a thoroughly clean, residue free surface.
Whether your patio is sealed concrete or cement, or even sealed concrete pavers, a bleach and water solution makes it easy to clean away built up soil, stains from leaves and pollen, mold, mildew and algae.