What is the little hole on a door knob for?

Author: Dr. Hanna Weber  |  Last update: Monday, December 15, 2025

Think of it as a very small screw that turns the lock. When you insert a small enough flathead screwdriver into this groove it will open your locked door. You will have to use your sense of feel to connect and turn it, but it is easily done.

Why is there a hole in the door knob?

The hole in the center is to unlock the door from that side if it were to be inadvertently locked from the other side. Door knobs come with a special thin screwdriver like key that goes in that hole.

What is the bore hole for a door knob?

Most interior doors are prepped with a single boor hole. The Bore hole is the large diameter hole where the door knob is mounted. The standard sized bore hole is 2 1/8" in diameter.

What is the small hole next to the key hole?

These pinholes allow water to drain from the lock and helps prevent the internal components from rusting. Additionally, draining the water from locks in freezing cold environments helps stop water building up and freezing the inside.

What is the little hole on the door knob for?

Emergency Key

These keys are often made of metal and are narrow and solid in order to fit into the small hole of the door handle or knob. To use an emergency key, you insert the slotted end into the center of the lever or knob, then turn it clockwise or counterclockwise to lock/unlock the door.

All doors of the world will now be opened in THIS way!🔥 Only 1 perforator

What is the key hole theory?

A gravitational keyhole is a tiny region of space where a planet's gravity would alter the orbit of a passing asteroid such that the asteroid would collide with that planet on a given future orbital pass.

What are the different door knob holes?

Typically, deadbolts need a bore hole 1 1/2 or 2 1/8 inches in diameter. Levers and handlesets usually need a hole 2 1/8 inches in diameter. If you're shopping for replacement hardware, check the required backset. This is the distance from the edge of the door to the center of the bore hole.

How do you plug a bore hole?

Squirt wood glue into the hole, and then insert toothpicks or matches until the hole is filled. Tap them lightly with a hammer to push them into the hole as deep as possible. Let the glue dry and break off the protruding ends of the toothpicks or matches. Now you can screw the screw into the repaired drill hole.

Is there a key that can unlock any door?

A skeleton key has the warded section of the key removed so that it opens all the doors of a system. Some applications, such as a building with multiple entrance doors, have numerous locks that are keyed alike; one key will open every door.

What is the hole in the door for?

Bore hole. A bore hole is drilled into a door to accommodate a lockset.

Why is there a sock on the doorknob?

When your college roommate places a sock on the doorknob, it's a nonverbal warning that you should avoid entering because they are in the middle of having sex and don't want to be interrupted.

Why is there a small hole in the bottom of a lock?

The main purpose is drainage. Without the small hole, moisture would build up inside of the padlock's body, which can lead to problems like rust and corrosion. There are many different types of padlocks, but they often feature a small hole on the bottom to allow moisture to drain out of the body.

How to fill in a door knob hole?

If the holes are small, you can use wood filler to fill them. Apply the wood filler with a putty knife and let it dry completely. Sand the area with fine-grit sandpaper until it is smooth and even. If the holes are larger or the door is made of a material other than wood, you may need to use a patching compound.

How do you plug a small hole?

Fill dents and tiny holes with lightweight spackle using your finger or a putty knife. Make sure the spackle completely fills the dent or hole and is level with the rest of the wall. Allow the spackle to dry for 15 to 30 minutes or the time recommended by the manufacturer.

How do you use a bore hole?

Once we've drilled the borehole it's cased, sealed and lined. We fit a well screen and just above a submersible pump. The pump lifts the water up through the rising main then along the discharge pipe to the pressure tank. The well water is stored in the pressure tank, where it goes on to supply your home.

Why does my doorknob have a hole in the middle?

On the inside of that hole is a groove that will fit a small flat head screwdriver. Think of it as a very small screw that turns the lock. When you insert a small enough flathead screwdriver into this groove it will open your locked door.

What are the little holes on doors called?

A peep hole, also known as a door viewer, is a good way to see who is on the other side of your front door before you open it.

What are dummy door knobs for?

Dummy door knobs are one-sided “fake knobs.” They're usually installed on the surface of a door or behind it. Some come in pairs so you can use them on double doors. These types of door knobs don't have any working parts. They're good for a shallow closet or small pantry and the interior of French doors.

What is the keyhole symbol?

The Keyhole is a food label that identifies healthier food products within a product group. Choosing foods with the Keyhole symbol makes it easier and less time consuming to find healthier products in grocery stores.

What is the dark hole theory?

Black holes are perhaps one of the most fascinating predictions of Einstein's theory. These objects are completely gravitationally collapsed objects with such immense gravitational fields that not even light can escape their interior.

What is the key in hole syndrome?

This is a name often given for a urinary urgency/frequency urinary symptoms. Another name is urge incontinence. This is what happens when you feel the urge to urinate, arrive home, and just as you're putting the key in the lock, you get an intense urge and you begin to leak or feel like you're about to leak.

Previous article
How long can a freezer be left unplugged?
Next article
How do you remove double sided tape from laminate paper?