Labor Cost to Install Water Heater In general, plumbers cost $45 to $200 per hour, while electricians cost $50 to $100 per hour. Expect the following average price ranges for labor alone: Replacing a tank-style water heater: $150–$450. Replacing a tankless water heater: $600–$1,850.
This is because the process of installing a new water heater can be quite complex and often requires the use of special tools and equipment. Additionally, the cost of labor for this type of project can be quite high.
A variety of factors affect process of installing a water heater. The average cost for water heater installation ranges between $1,600 and $5,800, with appliance options at both ends of the spectrum offering cheaper and more expensive options, with fewer or more features, respectively.
The cost of Rheem water heaters typically ranges from $400 to $2,300 for the unit itself, depending on the type and capacity. For installation, homeowners can expect to pay an additional $500 to $1,500.
The price depends on whether you want an electric or gas water heater. The basic installation fee at Lowe's is around $320. But, before the contractor can set up the heater, they'll need to come to your home to check the conditions and determine the best location for it. This inspection will cost you an additional $34.
In general, plumbers cost $45 to $200 per hour, while electricians cost $50 to $100 per hour. Expect the following average price ranges for labor alone: Replacing a tank-style water heater: $150–$450. Replacing a tankless water heater: $600–$1,850.
Newer models require specialized tools and training to install, and the associated labor costs can add up quickly, making the total cost of the water heater higher than you expected.
Tank to Tank Installation: On average, replacing a gas or electric water tank with a similar model takes two to three hours. It takes between 45 to 60 minutes to drain, disconnect and remove your old water heater.
1. Rheem Performance Platinum — 9/10 (Best overall 50-gallon gas water heater) The Rheem Performance Platinum is arguably the best 50-gallon gas water heater for the average American home. It can supply enough hot water to a five-person household without tearing a crater-sized hole in your pocket.
Do not attempt installing a gas water heater yourself unless you're experienced and comfortable with soldering, working with natural gas and following local installation codes. Save yourself the hassle with our gas water heater installation services which include removal of the old water heater.
Typically, a hot water heater that uses a tank will run for 3 to 5 hours per day. So, a 4,000-watt heater used for 3 hours a day at 10¢ per kWh will cost $1.20 per day, about $36.50 per month, or $438 per year.
The cost to replace a 40-gallon water heater is $600 to $1,600 for an electric unit or $900 to $3,000+ for a gas unit, including installation labor. A 40-gallon water heater costs $400 to $2,000 for the unit alone, depending on the brand, features, energy efficiency, and fuel type.
Whether or not homeowners insurance covers water heater leaks depends on the specific circumstances of the leak and the terms of your policy. In general, if the leak is sudden and accidental, and not caused by your negligence, your policy will likely cover the cost of repairs.
Once you decide to (or are forced to) replace your current water heater, there are a few decisions you need to make to get the process started. If there are no issues or complications, a licensed plumber should be able to complete the process in 2-3 hours.
Anode Rod Replacement: While an anode rod costs between $20 and $50, a plumber can replace it for $50 to $150. The job typically takes about an hour. The anode rod protects the tank from corrosive materials and needs to be changed every few years. Water Heater Tank Flush: A water heater flush kit can cost around $150.
This project's low cost is $970 for a 50-gallon electric water heater replacement in an open-and-easily accessible area. The high cost is $6,500 for replacing a basic water heater with a 50-gallon solar water heater with gas backup, fully installed with roof panels and an indoor tank.
One of the big factors is cost of labor. A plumber may charge as little as $40 hourly. Or, they may charge more than $150. Repairing a heater usually takes two hours or less.
Lowe's Water Heater Installation
Let us replace and install your new water heater. Our Independent Service PROviders can help you with both tankless and traditional water heater tanks, including gas water heaters, electric water heaters and tankless gas water heaters.
However, we strongly recommend hiring a licensed plumber or water heater installer to handle the work. Licensed installers are far less likely to make a mistake during the installation, which means paying for the experience decreases your risk of a leak and other issues.
Licensed plumbers have the training and experience to properly install hot water heaters of all types. This includes electric and gas, tank and tankless, heat pump and geothermal. The job sometimes requires skills in addition to plumbing.
The most significant factor here is the type of water heater you choose to install. A simple unvented, copper cylinder could cost between £200 and £400, with labour to install adding another £30 to £80 per hour. An unvented cylinder can cost between £200 and £2,000, and you also need to factor in the labour costs.
It is certainly possible for a water heater to increase your utility bill. Several factors can reduce the efficiency, including a unit that is too small, too old, bad water, or an incorrectly set thermostat can increase the energy bill. Leaks and long pipes can increase your water usage.