The main difference is that power washing uses highly pressurized steam to do the cleaning while pressure washing just uses unheated tap water, without the help of a heating element.
Both power washing and pressure washing are great ways to cleanse surfaces quickly and easily. If you need to clean a surface that is easy to reach, then pressure washing is a good option. If you need to remove stubborn dirt or grease, then power washing is the better option.
Pressure washers are available in two main varieties: gas and electric.
Pressure washers are typically the go-to, at-home tool used to clean concrete, but they lack certain features that would make them ideal for heavy-duty cleaning. Power washers, on the other hand, are equipped with more to get the job done well, like heating elements and higher pressure.
The downside to using pressure washers is that they tend to cause damage to surfaces that are too delicate. In addition, the high pressure of the water spray can cause damage to surfaces you don't intend for it to reach, such as brick or stone surfaces.
For most cars, a psi between 1200 and 2200 is recommended. This range provides enough cleaning power to remove dirt and grime without damaging the car's paint or delicate surfaces. Yes, you can use soap with a pressure washer.
Soft surfaces, such as decks and siding, usually require more cleaning power than harder surfaces such as driveways. For hard surfaces, such as concrete and brick, a higher PSI pressure washer with 2000-3000 PSI of water pressure is ideal. Such a device can effectively clean dirt and grime from these hard surfaces.
If you want to clean your driveway quickly and efficiently, use a pressure washer of at least 3100 PSI. Using pressure washers with pressures ranging from 1000 to 2300 PSI will also help you clean your driveway, but it will take a long time.
Medium Duty 2000-2800 PSI
This classification ranges from as low as 2,000 PSI to as high as 2,800 PSI. You can use a medium-duty pressure washer for almost any surface. They're great for cleaning concrete, brick, and wood.
The answer is yes – you can power wash with just water! However, there are a few things that you need to keep in mind when doing this. In this blog post, we will discuss the pros and cons of power washing with water, and we will also give you some tips on how to do it correctly.
It's not necessary, but you can absolutely use soap or detergent when pressure washing your house. Washing with a mixture of soap and water will ensure your siding is spotless when you're finished. However, in many cases it is not necessary to use soap and you can still achieve a powerful result without any product.
After more than 80 hours of research and two weeks using eight pressure washer models to clean cars, outdoor chairs, and more, we found that the best pressure washer for most homeowners is the Ryobi RY142300 2300 PSI Brushless Electric Pressure Washer.
An electric pressure washer is a great option if you're looking for a practical tool for general cleaning jobs. As we've explained earlier, electric machines are powerful enough to clean off most dirt and grime, including old paint, mold, grease, plant residue, and much more.
Applying a degreaser will loosen stains in the concrete, allowing you to pressure wash them away. Some pressure washers have an attachment tool for applying degreaser. Otherwise, scrub the degreaser into the concrete with a stiff-bristled brush or push broom.
There's no doubt that electric pressure washers from 1,300 to 2,300 psi can wash a concrete driveway, but it'll take longer. If you have a large driveway with lots of stains, you'll want more power to do the job faster. I chose the 3,100-psi gas pressure washer and cut the job time in half.
The strength of a pressure washer is measured in bars, for wooden decking you can use anything up to 130 bars and for stone or brick patios anything up to 140 bars.
Mid-Range Power: 2,000 to 3,200 PSI
The most versatile category of pressure washers, those ranging from 2,000 to 3,200 PSI effectively clean cars (including the most well-used off-road vehicles), home siding, fences, boats and grimy garage floors. Those closer to 3,200 PSI work effectively on tough stains, too.
Concrete and asphalt require more cleaning power. You'll want to use the turbo nozzle on the 1600 PSI for hard-to-clean driveways, sidewalks, and patios as well as brick paving. For wood decks and painted surfaces, switch to the gentler 40-degree nozzle.
2,000 to 3,000 PSI
Good for cleaning concrete surfaces with light to moderate oil stains, most automotive cleaning, pools, many industrial applications.
Don't use household cleaning agents like hand soap, dishwashing detergent, or glass cleaner on the paint. These aren't formulated for use on a car's paint and may strip off the protective wax. Do use a dedicated car-wash product, which is milder and specifically designed for use on automotive paint.
You should also never set your pressure washer above 2,200 psi when washing your car. 1,500 psi is really all you need to get a good deep clean; any pressure higher than that won't make a noticeable performance difference.