As a gentler cleaner, bleach can't harm concrete's durable material. Aside from being an effective cleaner and stain remover, it also acts as a disinfectant to the concrete surface.
Use Bleach
But that's not all; chlorine bleach can also be used for cleaning the concrete driveway. Of course, you should dilute it with equal parts of water or a 1:1 ratio. With the mixture ready, spray it on the driveway, allowing it to sit for 10 minutes. Then, use a stiff brush before rinsing with clean water.
Apply bleach solution using a brush or broom on horizontal surfaces, and a sponge or mop on vertical surfaces. Heavily soiled surfaces may require additional scrubbing. Wait up to 15 minutes. Rinse thoroughly using a garden hose with a spray nozzle.
You should never attempt to clean your sealed or polished concrete floors with ammonia, bleach, citrus cleaners, pine based cleaners, vinegar or any highly acidic substance. These are not pH neutral, and could break down or dull the sealant on your concrete flooring.
Dish soap and water: Dish soap is a degreaser, and it works well to clean oily and grimy concrete. Create a cleaning solution of warm water and few drops of dish soap and apply it to the surface. Let it sit for a while, then mop the patio and rinse it with fresh water. Repeat the process as many times as needed.
In fact, vinegar removes mold from concrete better than bleach. Bleach will only remove the top layer of mold, causing the mold to return.
Whether your patio is sealed concrete or cement, or even sealed concrete pavers, a bleach and water solution makes it easy to clean away built up soil, stains from leaves and pollen, mold, mildew and algae.
For lightly soiled concrete, you can remove dirt by using bleach mixed with water. Add 1/8th cup of liquid dishwashing detergent to the solution and pour it into a spray bottle. Spray the solution onto the surface, and let it sit for a few minutes. Scrub with a nylon-bristled brush.
Yes, vinegar is an excellent concrete cleaner. This solution can strip surface-level messes from concrete. Due to its acidic properties, vinegar can be a powerful tool for breaking down offensive materials such as dirt, stains, and bacteria.
After disinfection with bleach solutions, surfaces should be rinsed and dried. Bleach can be irritating to skin and mucous membranes, so any residue should be removed prior to returning animals to the environment.
Bleach is commonly used to whiten concrete and is very effective at doing so if the initial stain is removed beforehand. Bleaching stained concrete white prepares it for any additional coloring treatments that you may wish to apply in the future.
First, you'll need to make sure that there's no run-off of the bleach onto any surrounding plant life. Plants that come into contact with bleach will die. Second, bleach isn't suitable for man-made concrete slabs – only natural paving stones. Bleach will fade artificial slabs over time.
Although bleach is great at the whitening effect, you can use peroxide to achieve this. Hydrogen peroxide is an oxygenated bleach. It is safe for plants, so when you rinse this solution, it won't harm anything. It works together with the dish soap and baking soda to remove dirt and whiten dirty concrete.
Spraying a vinegar solution (1 cup of vinegar per gallon of water) onto the surface, saturating it fully, should kill most strains of mold. Vinegar spray can be followed by power washing or manual hand scrubbing to remove the dead mold.
OxiClean is a powerful concrete cleaner that works well on various materials, including pavement and grout. This concentrated solution provides excellent cleaning without leaving residue. OxiClean is the cleaner for your toughest cleaning jobs. Clean your home, patio, driveway, and more.
Leave the Bleach on the Pavers
Allow the bleach to sit on the pavers for about 10-20 minutes. This will help to disinfect and clean the surface. It will also help remove any stains that are tough to remove and mold.
Combine 1/4 cup of liquid bleach with 1 gallon of hot water in a large bucket. To avoid damaging your lawn or walkways, always dilute your bleach and control your runoff when rinsing. Soak your brush in the solution and scrub the entire area until it's fully saturated.
Mixing vinegar and bleach together releases a poisonous chlorine gas, which can be fatal if inhaled at high enough concentrations.
You can use Simple Green Oxy Solve Concrete and Driveway Cleaner to clean a concrete patio with or without a pressure washer. It removes oil, grease, grime and most stains and discolorations. Its biodegradable formula is safe for lawns and pets.
Baking Soda
Salt and commercial ice-melt formulations can stain — or actually eat away — the concrete around your house.
dish soap, 1 cup white vinegar and 1 gallon warm water in a bucket. Recipe #2 – Make a solution of 1 part all-purpose cleaner, 2 parts warm water and 4 parts ammonia. Recipe #3 – Mix 1/3 cup Tide to 1 gallon of warm water. Any of these should work well for cleaning unsealed cement garage floors.
Scrub the concrete with a nylon-bristled brush and then rinse thoroughly with the garden hose. For extremely heavy stains, a power washer provides a much stronger stream of water to blast away the grime. Use a hose to rinse greenery after the patio is clean.
Tide (or a similar powdered) detergent: Mix the detergent with a little water to make a paste. Wipe the floor with a wet cloth first, apply the paste, then use a brush to scrub. Rinse the area with clean water.