Pressure washing is one of the fastest, most effective ways to get your concrete white again. Concrete can change color over time due to pollen, algae, or dirt buildup, but a good pressure wash can easily remove dirt and stains and make your concrete look new again.
If your concrete is dull and sprouting weeds or mold, bleach is your best option for cleaning and brightening concrete. Mix a cup of bleach into a 5-gallon bucket of warm water, then spray or pour over concrete. Rinse thoroughly with water.
As moisture rises to the surface of the concrete, it carries with it the calcium salts from within the concrete. These react with CO2 at the surface, forming that white powdery dust. It can be worsened by exposure to moisture, such as rain. With no moisture movement, there is no efflorescence.
A quick answer is yes! White vinegar can clean concrete and remove stains. It may not be as powerful as concrete cleaners, but it can clean up concrete stains on a budget.
In fact, vinegar removes mold from concrete better than bleach. Bleach will only remove the top layer of mold, causing the mold to return.
Liquid peroxide formulas clean and brighten grout lines without harsh acids and chlorine bleaches that can damage the grout and surrounding flooring materials. The Liquid peroxide cleans, refreshes, and brightens concrete, tile, and grout without leaving watermarks or residue in contrast to other cleaning chemicals.
As a gentler cleaner, bleach can't harm concrete's durable material.
Alkaline cleaners are great for lifting oil stains, grease stains, and other petroleum-based stains from concrete. It's an added benefit that you can use it with a pressure washer, making the job that much easier. For an eco-friendly cleaner, we recommend Oil Eater cleaner degreaser (US$15.74, Amazon).
Dish soap and water: Dish soap is a degreaser, and it works well to clean oily and grimy concrete. Create a cleaning solution of warm water and few drops of dish soap and apply it to the surface. Let it sit for a while, then mop the patio and rinse it with fresh water. Repeat the process as many times as needed.
Although the bulk of the hydration process takes place in the hours and days immediately after the pour, concrete needs 28 days to fully dry. While the slab will harden and lighten in color before 28 days, don't be fooled into thinking it's done hydrating.
Although bleach is great at the whitening effect, you can use peroxide to achieve this. Hydrogen peroxide is an oxygenated bleach. It is safe for plants, so when you rinse this solution, it won't harm anything. It works together with the dish soap and baking soda to remove dirt and whiten dirty concrete.
Another relatively safe and environmentally friendly solution for cleaning concrete is an oxygen bleach product, such as OxiClean. Just be sure to wear rubber gloves, as bleach products can be tough on skin. Sprinkle the powerful solution over the entire patio and scrub it with an ordinary push broom.
You can use Simple Green Oxy Solve Concrete and Driveway Cleaner to clean a concrete patio with or without a pressure washer. It removes oil, grease, grime and most stains and discolorations. Its biodegradable formula is safe for lawns and pets.
Simply fill a spray bottle with equal parts water and vinegar (or water and baking soda), and add a little bit of liquid dish detergent. Spray the mixture on your concrete surface and let it sit for about 30 minutes. Then scrub and rinse your concrete.
Bleach helps whiten the concrete, but is generally ineffective in removing the stain itself.
Muriatic acid can work wonders on filthy concrete. However, it shouldn't be used on penetrating sealers since it can damage these finishes. It might also damage some acrylic sealers, so test a small area if you're not sure.
But that's not all; chlorine bleach can also be used for cleaning the concrete driveway. Of course, you should dilute it with equal parts of water or a 1:1 ratio. With the mixture ready, spray it on the driveway, allowing it to sit for 10 minutes. Then, use a stiff brush before rinsing with clean water.
After disinfection with bleach solutions, surfaces should be rinsed and dried. Bleach can be irritating to skin and mucous membranes, so any residue should be removed prior to returning animals to the environment.
Cleaning concrete with muriatic acid can be a highly effective solution if used correctly, providing ultra-bright white concrete and removal of many types of stains. In one application, you can remove rust stains, oil stains, algae, and paint splatter with a quick chemical application followed by pressure washing.
Baking Soda
Salt and commercial ice-melt formulations can stain — or actually eat away — the concrete around your house.
In a plastic bucket or container, add ⅓ cup of Clorox® Outdoor Bleach to 15⅔ cups of water to make 1 gallon of solution. Apply bleach solution using a brush or broom on horizontal surfaces, and a sponge or mop on vertical surfaces. Heavily soiled surfaces may require additional scrubbing. Wait up to 15 minutes.
What constitutes a safe solution for cleaning your indoor stained concrete floor depends on what kind of concrete floor you have. For most concrete floors, you can use a mixture of flour and hydrogen peroxide or water and trisodium phosphate.