Sprinkle a layer of dry baking soda on the stain. Then, mix a cup of white vinegar with a cup of water and a few drops of dish soap in a spray bottle. The vinegar will foam when it hits the baking soda which will clean the stain.
Apply hydrogen peroxide to the stain – it is often a good idea to put the peroxide in a spray bottle first and then spray the stain. Let the hydrogen peroxide sit for a few minutes and use a bristle brush to scrub the stain. Use a cloth or steam vac to pull the peroxide out of the carpet.
Another powerful method to try on old stains is vinegar and baking soda. Vacuum the stain first and then sprinkle baking soda over the area. Mix 1-part vinegar with 1-part water in a spray bottle. Mist over the baking soda and leave it to foam, dry and harden over a few hours.
Our main tools and techniques include: Steam Cleaners or Hot Water Extraction Machines: These powerful machines use hot water and suction to penetrate deep into carpet fibers, loosening and removing embedded dirt, grime, and stains that regular vacuuming cannot reach (source: carpet-rug.org).
Yellow mustard dyes the carpet and is nearly impossible to get out. The champion of all deadly stains. Chances of removal 2%.
OxiClean Carpet Stain Remover
The Oxi-Clean Carpet Stain Remover earned its spot as our best overall pick because, out of all the stain removers we've tested, this one was the most effective across all types of spots. It even eliminates strong urine odors, and leaves behind a light laundry-like scent.
One of the most effective methods you can use to remove old stains from carpet is a combination of baking soda and vinegar. Old stains can ruin the appearance and inherent value of your carpet like no other.
The simple answer is: Yes, you can use it relatively well on some fabrics and carpets.
Abrasive cleaners can damage the carpet fibers and leave a bare spot where the stain used to be. The same goes for heavy-duty scrubbing brushes. If you must scrub your carpet, use a mild cleaner and a soft bristle brush to prevent damage.
Mix equal parts water and hydrogen peroxide (no more than 3% concentration) in a spray bottle and shake well. Spray the stained area generously but not excessively. Gently agitate the stain with a soft-bristled brush or microfiber cloth, working from the outside edges towards the center of the spot.
First, soak the stained fabric in cold water for at least 30 minutes. Mix 1 tablespoon of liquid laundry detergent with enzymes with 1 cup of water. Add 1/4 teaspoon of white vinegar and stir. Use a Dobie All Purpose Cleaning Pad to apply the detergent-vinegar mixture to your unidentified stain.
Instead of using store-bought carpet cleaners, you can mix 3% hydrogen peroxide and water to treat ink, blood, pet and other stubborn stains from your delicate carpets. Some of the reasons are: It has oxidising properties that attack nasty stains and take them out of fabrics in a few minutes.
Next, try a solution of white vinegar, Dawn dish soap, and water in a spray bottle. Mix 1/4 cup of white vinegar, 1 tablespoon of Dawn dish soap, and fill with water. Spray the solution liberally on the stain and let it soak for 5-10 minutes. Then, blot the stain with a clean, dry towel until it is removed.
Removing Stains from Carpet and Rugs
Use OxiClean™ Versatile Stain Remover to remove tough-to-get out carpet stains! Fill to line 1 per 16 ounces of water. Remove excess stains before treating. Only enough solution to saturate stain.
Hot Water Extraction
Otherwise known as steam cleaning, this is easily the most common professional carpet cleaning technique. Steam cleaning uses hot water at high pressure to penetrate into carpet fibers, breaking down the dirt and bacteria stored deep within. The hot water is then extracted via vacuum.
If the stain is stubborn and won't come out, make a solution of one quart of warm water and one teaspoon of mild non-bleach laundry detergent (the liquid kind). Don't use dishwasher detergent. Apply this solution to the stain, let it sit for about five minutes and blot up excess moisture.
Step 1: Spray WD-40 directly onto the stain, and wait for the solution to absorb. This should take around 20 to 30 seconds. Step 2: Use a damp sponge to rub it in thoroughly. As you do so for a minute, the solution will work its way under the stain and loosen its bonds, making it easier to wipe off.
The carpet cleaning machines use hot water and cleaning solutions to deep clean your carpets. The hot water mixes with the cleaning solution and removes dirt and stains from deep within the fibers. While these machines are expensive, they can save you money in the long run by extending the life of your carpets.
Have you ever wondered “Can I use Mr Clean in My Carpet Cleaner?” The answer is yes! But with some caveats. While Mr Clean can be used to clean carpets, there are a few things that need to be taken into consideration before diving in and using it.
Start by sprinkling a generous amount of baking soda over your carpet. Then, spray a mixture of warm water and carpet shampoo over the baking soda. Scrub the carpet with a brush, then blot with a clean cloth. Repeat the process using only water to rinse out the shampoo and baking soda, then blot dry.
Baking soda is the go-to solution for bringing your carpet back to life. Not only does it clean, it also kills bacteria, refreshes the pile and removes odours. Apply plenty of baking soda to completely cover your carpet then use a stiff brush to work it in, rubbing it in different directions.