Add 1-2 cups of white vinegar to the bowl and leave it in the toilet for 20-30 minutes. After this, gently scrub the walls of the toilet with the brush or sponge and rinse the white vinegar and baking soda away with water. This cleaning method should take care of your stains.
Vinegar and baking soda: Add 1 or 2 cups of vinegar to the toilet bowl along with a few sprinkles of baking soda. Swish the solution around the bowl with your brush for a few minutes and then let it sit for about 15 minutes. Scrub the stains with your brush (or pumice stone).
Simply pour a kettle of almost boiling water into the bowl, follow up with 250ml of citric acid, and leave it for some hours – preferably overnight. The next day, scrub and flush. What's good for those caked-on pots and pans after cooking dinner is also good for removing a brown stain on the bottom of the toilet bowl.
Hydrogen peroxide, vinegar, and baking soda are green cleaning solutions to wipe out the most common toilet bowl stains. We suggest you start with the safest, most natural stain removers and move on to more drastic measures as needed.
Urine scale and limescale leave visible deposits in the toilet. Whereas limescale is a mineral, urine scale contains several mineral salts. The waste in urine contains phosphorus, potassium, sodium, calcium and magnesium. These substances produce brown or yellow stains in the toilet bowl.
As a one-stop cleaning solution, pour one cup of bleach around the bowl. Then tackle every inch with a toilet brush or a handheld scrub brush. Let it sit for five minutes, then flush.
Calcium build-up – Ordinarily, yellow stains are limescale formations. They are caused by hard water – it's rich in minerals, which accumulate over time and become visible inside the toilet bowl. Eventually, these minerals can even accumulate in your pipes, causing a toilet block.
“Like when removing limescale from a toilet bowl, only using bleach does just half a job – the stains will become invisible, but the route of the problem will still be there, causing stains to return quickly while becoming deeper-set in the surface of the seat.”
Pour a cup of vinegar into the bowl, then mix it around with a toilet brush. Add a cup of baking soda to the coated areas and immediately follow up by adding another cup of vinegar. Wait about 10 minutes to allow the baking soda and vinegar to interact, creating that effective fizzing action.
The best way to clean toilet stains from tough mineral buildup is with lemon juice or any source of citric acid. Spray on the lemon juice and leave it overnight. Then spay on another light layer and wait a few minutes before scrubbing your toilet. Flush to rinse away the stain.
Answer. Well water with very high iron and sodium hypochlorite bleach are just not very compatible. The bleach active reacts with the iron and changes it to the chemical form as rust. This new yellow/red discoloration then deposits on clothes, causing discoloration.
Rinse with a soft cloth moistened with clean water. Allow the area to dry completely. If the stain remains, moisten a soft cloth with hydrogen peroxide and rub it over the area. If the stain is severe, pour a small amount of peroxide on the stain and allow it to set for several minutes.
Hydrogen peroxide and baking soda are a 1-2 punch when it comes to yellow stain removal. Peroxide is more gentle on fabrics than bleach, and baking soda quickly gets rid of any odors. Add a bit of Dawn to the mix, and you have a concoction that can't be beat.
Make a paste by mixing 1/2 cup of Borax and enough vinegar to form a thick paste. Spread the paste immediately onto the hard water stains in the toilet so they are completely covered by the paste. The Borax will harden quickly so don't add the vinegar until you are ready to apply the paste.
Vinegar and baking soda
Pour about one cup of white vinegar into the toilet bowl, followed by about one cup of baking soda, then let it rest for around 10 minutes. It's a good idea to wear gloves when using this as a toilet cleaner and to have eye protection.
Just as natural dish soap helps break down dirt, grease, and food that may be stuck on dishes and utensils, it can help break down what's in your toilet bowl.
Don't leave CLR for longer than two minutes.
Always rinse away with cool water after two minutes of contact.
CLR's unique formulation has multiple uses! Safe for various applications and surfaces… (tubs, showerheads toilets, sinks, porcelain, glass, cement, stucco, brick, stainless steel, and much more)!