Apply waterproofing before finishing touches like paint or tiling, during dry weather (50°F to 90°F), and only after underlying materials have fully cured. Do not waterproof in the rain or when the substrate is damp.
Avoiding common basement waterproofing mistakes can save you time, money, and frustration down the road.
Debunking the Myth: “You Can't Waterproof in Winter”
A common misconception is that waterproofing in winter isn't possible. While some exterior foundation work may be limited by frozen ground, interior waterproofing solutions can be planned — and often completed — year-round.
The answer is yes — but with conditions. In this easy-to-understand blog, we'll explore how waterproofing works in the rainy season, what methods are effective, what risks to avoid, and how you can protect your home and belongings even after the first rain.
Waterproofing typically lasts 10 to 25 years, but the exact lifespan varies significantly by the application. Foundation and basement systems can endure for decades with proper maintenance, while exterior coatings and temporary sealants degrade much faster.
The most affordable waterproofing method is the use of basic acrylic waterproof coatings. However, these coatings may not last as long as premium waterproofing solutions.
The most effective method for waterproofing a newly constructed basement wall is to seal both sides of the concrete on the exterior and interior with RadonSeal. Afterward, allow the sealer to initially cure and the concrete to dry before applying the exterior waterproofing coating (2-4 days).
Even though insurance won't cover it, basement waterproofing is one of the best investments you can make in your home—especially in a moisture-prone region like ours. It will protect you against serious and expensive damage like mold, wood rot, and structural issues.
Is it worth it to waterproof the basement? Yes! Cracks in a basement will increase long-term maintenance and repair costs, damage your building's integrity, and cause the following basement moisture-related problems: Structurally damaging and unhealthy mold.
Most water-based membranes require a final application rate of approximately 1.5L per per square meter. This is often achieved with two coats, however, as application techniques and membrane viscosity vary, you may need to put on further coats to achieve that type of usage.
High temperatures can result in “spider webs” when the solvent flashes before the sealer can form a film, or bubbles when the solvent flashes too fast and traps air. Alternately, if the temperature is below 50 degrees, the chemical reaction slows and the time needed to properly seal concrete increases.
Whether you leave your outdoor spigot open in the winter depends on the type of faucet you have and how you winterize your home.
Materials that are considered 100% waterproof typically include synthetic polymers and coated fabrics that create an impermeable barrier to water, such as PVC (vinyl), silicone-coated nylon/polyester (silnylon), rubber, and polyurethane laminates. These materials do not allow water to pass through, making them ideal for tents, rain gear, and coverings.
One of the main drawbacks of high-quality waterproofing membranes is the higher upfront cost compared to cementitious coatings or basic damp-proof membranes, which are usually cheaper but less effective. Secondly, waterproofing membranes often require professional installation.
Steps
Size. The cost to waterproof a basement falls between $3 and $10 per square foot on average, although where in this range your pricing falls depends largely on the type of waterproofing method you choose. In any case, large spaces require more time, labor, and material to waterproof than small spaces.
Avoid making guesses or unsupported statements about what caused the damage to your property. Speculating can lead to inaccuracies in the adjuster's report, potentially affecting your claim.
When it comes to insuring your home, the 80% rule is an important guideline to keep in mind. This rule suggests you should insure your home for at least 80% of its total replacement cost to avoid penalties for being underinsured.
Invest in a dehumidifier.
It's a game-changer for removing those damp, musty odors in your basement. There it is... a beautiful dehumidifier. And not just any dehumidifier—it's the SaniDry Sedona.
12 Things You Should Never Store in the Basement
There are three main methods of providing protection against ground water for residential basements. These are defined in BS 8102 as Type A (Barrier) system, Type B (Structurally Integral) system and Type C (Drained) system.
In general, polyurethane waterproof coatings are one of the most durable options since they are resistant to chemicals and can withstand extreme temperatures and UV exposure.
Yes, you can waterproof your basement yourself, but it is best limited to interior sealants and exterior drainage maintenance. Major jobs involving exterior excavation, installing interior French drains, or correcting severe structural foundation cracks require a professional.
A Look at Cost Per Square Foot
To get a more customized idea of your potential costs, it helps to look at the price per square foot. Generally, you can expect to pay between $3 and $10 per square foot for exterior waterproofing.