Vera Peterson, president of Molly Maid, recommends starting with vinegar to soak the tank. “First, remove the lid and take a peek inside,” she told Martha Stewart Living. “If you see any mineral buildup or crud, pour four cups of vinegar into the tank.
Vinegar is a great toilet cleaning solution. Not only is it free of chemicals and naturally antibacterial, it's also an acid, so it will remove minor lime and calcium deposits. All you need to do is pour a couple cups of vinegar in your tank and let it sit for an hour or so, then scrub and flush to rinse.
The tanks are designed for water only, so putting anything more can destroy the rubber seals, degrade the flushing mechanism or in extreme cases cause damage to the tank itself. The inside of the toilet tank isn't glazed like the bowl or outside of the tank. So you should probably avoid Tydy Bowl and the like.
Adding a few drops of essential oil in the water tank will make your toilet feel fresh but as soon as all the water scented due to oil goes down the drain, it will be all the same again.
While the idea of your bathroom smelling like fresh laundry with every flush might be tempting, the potential risks outweigh the benefits. The chemical makeup of fabric softeners can be harmful to septic systems, leading to clogged pipes and potential damage to the flushing system.
They either dump the entire bottle directly into the toilet tank, or cut a hole at the bottom of the bottle and place it inside the tank. The idea is that whenever they flush, the toilet bowl itself will fill up with the sweet smell of Fabuloso, negating any unsavory scents that might otherwise be lingering.
Luckily, there are safe alternatives (both for you and your septic system) to using chemically-laden, petroleum-based fabric softeners to achieve these results. Distilled white vinegar is a popular choice, offering great solutions to many common laundry woes.
Both white vinegar and baking soda will eliminate smelly bacteria and break down any minerals that may have built up from your water supply. You can also introduce this mixture into your toilet bowl. Just let it sit for 10-15 minutes before you flush!
It isn't a good idea to put laundry detergent into the toilet tank. The detergent can cause clogs in the toilet and pipes. Additionally, if the home has a septic system, the laundry detergent will devastate the beneficial bacteria, reducing the effectiveness of the septic system.
Who knew that dishwasher tablets could help keep your toilet sparkling clean? Just drop a dishwasher tablet in toilet bowl and let it sit for 10-15 minutes. Then, use a toilet brush to scrub the bowl and flush it. The tablet will help to break down any stains or buildup in the bowl, leaving it fresh and clean.
Baking Soda and Vinegar
Baking soda is also a mild abrasive, so it will remove stains and grime from your toilet bowl. To clean your toilet, use one cup of baking soda with two cups of white vinegar. Brush it into the bowl, let it sit for five minutes, then flush again with the water on full force.
Lemon essential oil or eucalyptus lavender can be good choices. Spritz away: Spray the solution generously in your bathroom. Pay attention to the toilet bowl and other areas that tend to accumulate odours. Try a diffuser: To keep your bathroom smelling great consistently, consider using a diffuser or humidifier.
Avoid using cleaner tabs—they often contain bleach, which is a no-no for cleaning toilet tanks because of bleach's corrosive properties. Add a cup of white distilled vinegar to the tank once a month. Leave it to sit overnight and then flush it in the morning. Check for sediment buildup and staining every month or so.
Using dish soap can damage your toilet, as it's tough on rubber and can potentially break down the seals on your toilet over time. Instead, stick with cleaners that are made for toilets, and save dish soap for other areas of your home, such as for your mop water, degreasing kitchen cabinets, and cleaning appliances.
If you want to keep the tank clean longer, you can also go back in with the vinegar, adding a cup or two to the tank once a month, letting it soak, and flushing the toilet the next morning.
For example, a popular “cleaning hack” you may see online is pouring fabric softener into your tank. The idea here is that it'll release a fresh smell with every flush. But instead, your toilet's flapper seal will end up damaged and your toilet won't flush properly.
You can buy a bathroom or all-purpose disinfectant cleaner to clean the inside of the toilet tank, or you can make a disinfecting solution using rubbing alcohol or white distilled vinegar. For rubbing alcohol solution, use two parts rubbing alcohol to one part water.
He said chlorination is the best way to remove the smell from the water tank. To do that, add a solution containing chlorine and let it settle for a few hours before fully draining it out. This will eliminate any bacteria or algae that could be the source of the smell.
You can clean the toilet using this product by pouring a little into the bowl and scrubbing clean. But we don't recommend placing Fabuloso or any other all-purpose cleaner in the back of the toilet tank. Such cleaners can be corrosive and may degrade the rubber gasket and seal in your tank.
Yes, Dawn dish soap is generally safe for septic systems. It's got quite a reputation for being septic-friendly, and for good reason. As long as you're not going overboard with it, Dawn isn't likely to mess with the bacteria in your septic tank.
The ingredients required for this natural solution are the following: Water, Sugar, Cornmeal, and Dry Yeast. To concoct this mixture, first start by boiling roughly a half gallon of water. Add in 2 cups of sugar. The sugar will act as the first food your bacteria will eat!
Using homemade cleaners using ingredients like lemon juice, vinegar, and baking soda are excellent options. This is because they are eco-friendly, cost-effective, and do not harm your septic tank or sewage treatment plant.