Vinegar can be applied directly or in a 1:1 ratio with water. In the case of bicarbonate soda, dissolve 1 to 5 tablespoons in 10 litres of water, depending on the degree of soiling. The mixture must now soak in for 15 to 20 minutes. The patio is then cleaned with a scrubber and finally rinsed with clean water.
In fact, one of the most effective patio cleaning products is good old-fashioned washing-up liquid mixed with warm tap water.” “White vinegar is also safe to use as a patio cleaner – in fact, it has many benefits as it is environmentally friendly, non-toxic, and non-chemical.
Wash patio slabs with white vinegar
This eco-friendly solution is made up of equal parts vinegar and water, which is then left to soak into the patio to correct any discolouration and also remove tough marks. You should first move all plants and furniture out of the way, then sweep the area to remove any moss.
Cleaning your paving slabs with bleach and water is very effective at removing and cleaning moss, algae, and weeds from paving but it is not for everybody! All paving slab types are different.
Don't use bleach to clean patios
However, we advise against this as it could potentially discolour and ruin your patio slabs." Rowan said many other cleaning solutions can be used that are far less harmful than bleach. Clean water or soapy water, for example, can be used to clean patios.
Use a mild grease-cutting detergent such as Dawn or Ajax dishwashing liquid mixed with water and a natural or synthetic bristle scrub brush to help brighten the patio surface. NOTE: Never use a wire brush as it can leave rust stains and scratch the concrete surface.
Make up a 50:50 vinegar and water solution, and apply to the paving – using a watering can will help you get even coverage. Leave the solution to soak for around 20 minutes, then use a stiff brush to remove stains. Once you're done, mop with clean water. Leave to dry before you put anything back on to the patio.
Use Bleach
But that's not all; chlorine bleach can also be used for cleaning the concrete driveway. Of course, you should dilute it with equal parts of water or a 1:1 ratio. With the mixture ready, spray it on the driveway, allowing it to sit for 10 minutes. Then, use a stiff brush before rinsing with clean water.
As a gentler cleaner, bleach can't harm concrete's durable material.
'A homemade cleaning solution for your patio can be made by mixing equal parts water and white vinegar,' says Zak. 'This natural cleaner is effective in removing dirt, mildew, and algae. For stubborn stains, you can add a few drops of liquid dish soap to the mixture. '
If you prefer to use eco-friendly products, vinegar, and baking soda are viable alternatives. When they are mixed with water, they can be a powerful cleaning agent. Also, they're both safe for your pets and plants!
Wash with soapy water
The classic and easiest method is to wash your paving slabs with warm water mixed with dish soap, rubbing it in with a brush before rinsing it with water and allowing it to dry fully.
Experts say they can do the trick for the patio as well. 'You can remove black spots easily from patios in an eco-friendly, low-cost way, with white vinegar,' says Laura Harnett, Founder, Seep. 'It has antifungal and antibacterial properties and will also stop the mould or lichen growing back.
Mix Solution of dish soap and water, and use a brush to scrub the pavers clean. Make sure to rinse the pavers thoroughly afterward. This process may need to be repeated for tough stains. A recommendation is to do this every few months.
Water and mild dish soap is a popular cleaning solution because it's easy to find at home and it won't damage brick, but it will tackle stains. The BIA recommends using hot water for surface cleaning with a detergent. White vinegar and water, another common household cleaner, can also be used on mildew.
Simply fill a spray bottle with equal parts water and vinegar (or water and baking soda), and add a little bit of liquid dish detergent. Spray the mixture on your concrete surface and let it sit for about 30 minutes. Then scrub and rinse your concrete.
In fact, vinegar removes mold from concrete better than bleach. Bleach will only remove the top layer of mold, causing the mold to return.
Whether your patio is sealed concrete or cement, or even sealed concrete pavers, a bleach and water solution makes it easy to clean away built up soil, stains from leaves and pollen, mold, mildew and algae.
Leave the Bleach on the Pavers
Allow the bleach to sit on the pavers for about 10-20 minutes. This will help to disinfect and clean the surface. It will also help remove any stains that are tough to remove and mold.
Pressure washers have a powerful pump and narrow nozzle, allowing them to blast water with a forceful spray. This removes dirt and grime from paving slabs quickly, while using water more efficiently than a normal garden hose.
Wet look seal for patio
This patio sealer is great, very easy to apply and makes a big difference to grey slabs which can look drab on a dry day. This sealer brings out the colour of the slab making it look lovely and dark and also repels the water so they sit like rivulets on the surface.