Fill a bucket with hot water, a half cup of vinegar and a half tablespoon of dish soap. Don't use too much soap, or the soapy residue will make your floors look dull. Before you mop, rinse out the mophead under hot running water to remove any debris from last time you used it. Mop the tile floors with the soapy water.
A concentrated cleaner is a fabulous option for both everyday and deep cleaning—and Fabuloso Lavender Purple Liquid Multipurpose Cleaner is our winner. It is suitable to use on most hard surfaces like porcelain, marble, ceramic, stone, and laminate and is great at cutting through grease and grime.
Don't use bleach or ammonia-based cleaners on your ceramic tiles either. These ingredients are just too strong and they will cause damage. It isn't just the cleaning solutions you use that can be harmful. Avoid using any hard or abrasive cleaning tools.
To clean your porcelain and ceramics, start with a gentle dish soap and water. Slavid advises taking off your rings and to avoid using harsh scrubbers like sponges or toothbrushes. Wash using just your hands and sudsy water. "Act as if you're washing a baby," he explains.
What is the best tile cleaner? For the most effective deep cleaning, always use a PH neutral cleaner, a diluted white vinegar solution and orange oil.
Tile cleaner
If you'd like one product that cleans everything in your bathroom, the famous blue bottle of window cleaner might just be it. Windex can also be used to clean tiles and grout, without causing any damage.
Vinegar is often used in ceramic slurries to change the viscosity (thicken it). While there are more effective flocculants (e.g. calcium chloride, epsom salts), vinegar is popular among potters simply because it is so available. The effect is to gel the slurry.
For cleaning new home ceramics, spray hydrogen peroxide on the ceramics and joints. For tougher stains and dirt, you can allow the solution to sit on the surface for a while, usually a few minutes. Gently clean the surface with a sponge or brush.
For the ceramic and porcelain tiles, cleaning the bathroom tiles with vinegar and baking soda will make an easier and more affordable approach. All you need is to wipe the surface using a dry cloth and then apply the paste by mixing vinegar and baking soda together.
Don't Use Abrasive Cleaners
Ceramic isn't indestructible the way carbon steel and cast iron are—i.e., there's no way to restore that coating once it's been severely damaged. Aside from only using non-abrasive tools and utensils, you should also avoid harsh cleaning agents like bleach, oven cleaner, and ammonia.
Many homeowners ask if Magic Erasers® can be used on porcelain or if they will damage ceramic tile. The good news is that they can be safely used on ceramic tiles and porcelain, so you have nothing to worry about if you plan on using them this way.
Stubborn Stains Call for Baking Soda
For those stubborn stains that won't budge, a paste of baking soda and water is your best friend . Apply the paste gently on the affected area, let it sit for a few hours or overnight, then wash as usual.
DISINFECTANTS FOR CERAMIC, PORCELAIN, GLASS & QUARTZ
Many disinfectants can be used on these materials, due to their resistance to common household chemicals. 70% Isopropyl alcohol, diluted bleach or 3% hydrogen peroxide can be used.
One DIY cleaner that is both natural and potent involves combining ¼ cup of white vinegar, one tablespoon of liquid dish soap, ¼ cup of baking soda, and two gallons of hot water. For a pleasant fragrance, add a few drops of essential oil to the mixture.
Tiles, let's face it, quickly become soiled and dingy. White vinegar is the ideal eco-friendly cleanser for porcelain, ceramic, or patterned bathroom floor tiles – even on the kitchen.
CLEANING METHODS
Never use a dishwasher for valued ceramics, and avoid using household bleaches or strong cleaning agents. Instead, dampen a cotton wool swab in warm water with a little detergent (no more than a few drops per litre of water). Gently roll the swabs over the porcelain, and refrain from scrubbing.
We have found that the best bang for your buck for your monthly tile scrub is OxiClean Powder. We did a test of several different cleaning methods, including my favorite hydrogen peroxide and baking soda method and OxiClean Powder gave me more for my money and with less effort.
For particularly tough stains, try mixing a solution of 25% bleach and 75% baking soda in a cup. Always test the solution on a small section of your ceramic tile before you tackle the mold.
The shiny appearance of glazed ceramic articles comes from the glass-like surface formed during the firing process.
Grout is porous and usually sealed to resist stains. However, acid can degrade these silicone-based sealants, causing them to break down and wash away. Contrary to popular belief, this can happen with just one application of vinegar.
Method 3: Dawn Dish Soap and Water
Step 2: Prepare the cleaning solution by combining warm water and a few drops of dish soap in a spray bottle. Step 3: Generously spray the cleaning solution all over the tile floor, then use a flathead mop to wipe it up.
Next, ensure you're NOT scrubbing any of the tiled areas with bleach or ammonia products. Chemical cleaners, such as, Tilex, Soft Scrub, Scrubbing Bubbles, or ammonia products will nearly always result in your tile surfaces' grout becoming very discolored.
How Do You Clean Ceramic Tile and Make It Shine? Baking soda is an excellent cleaner for thick dirt and greasy stains. Simply add some water to make a paste and apply it with a soft-bristled brush. Next, use white vinegar dissolved in water to remove residues and buildup.