Sprinkle baking soda on all tub surfaces. For extra-dirty tubs, use tub-and-tile cleaner instead. Fill your bucket with a half-gallon of hot water and two tablespoons of dish soap. Dip a scrub sponge or a stiff nylon brush into the bucket, and scrub all bathtub surfaces.
Make a bathtub cleaner paste of one part hydrogen peroxide to two parts baking soda (or cream of tartar). Rub the paste on the stain and let stand for 30 minutes to one hour, then wipe and rinse. If necessary, repeat until the stain is gone.
Blend ¼ cup quantity of liquid dish detergent in vinegar. Shake the spray bottle to blend both ingredients. Spray the cleaning mixture on soap scum and other dirty regions of bathtub. Wait for 10-15 minutes and then wipe the treated areas with a soft sponge.
Mix water and vinegar in a spray bottle. Follow a 2:1 water-to-vinegar ratio for fiberglass and a 1:1 water-to-vinegar ratio for porcelain tubs. Add a teaspoon of lemon juice for scent and an extra cleaning boost. Spray the entire tub with the solution and allow it to sit on the surface for 15 to 20 minutes.
Combine two parts vinegar and one part water in a spray bottle and spray the entire bathtub. Allow this soaking solution to sit in the tub for 15 to 20 minutes. For tough stains: place a towel soaked in a vinegar and baking soda paste or hydrogen peroxide onto the stain(s) and allow the towel to sit for up to one hour.
That's right: Grab your dish soap and a broom, and you might be as pleasantly surprised as we were to learn that Dawn is apparently just as effective at banishing bathtub scum as it is at removing all that grime and grease from your dishes and pans. Plus, this technique is equal parts simple and fast!
When you combine the two, they become a potent cleaning force that will transform your shower. The secret to a clean bathroom is probably in your kitchen right now.
Diluted bleach is particularly effective at combating mold and mildew growth in your tub. If you have dirty tiles around the tub, ordinary hydrogen peroxide is an effective tile and grout cleaner, and white vinegar is good for cleaning bathtub fixtures. Never use all of these chemicals at once, though.
A. Household bleach is an alkaline material and consequently will precipitate iron out of water. It sounds like that's what happened since iron stains are rust colored. A mildly acidic household product made for removal of iron stains should take care of it.
Fiberglass bathtubs may start to turn a yellowish color as a result of soap scum or hard water. These stains can be very difficult to remove. However, a mixture of cream of tartar and hydrogen peroxide will easily remove any stain and restore the tub to its original white color.
Best Overall: Rejuvenate No Scrub Soap Scum Remover
It's free of bleach and fragrances, and whether you're cleaning your tub, shower, counters, or floors, you'll be left with a streak-free finish every time. This non-abrasive formula works on glass, plastic, ceramic, porcelain, stone, chrome, and stainless steel.
It's pretty simple — just like they do on food particles that are stuck to your dishes in the sink, the combination of hot water and dish soap help to dissolve and break up whatever it may be that is lodged in the toilet causing a clog.
Pour a generous amount of dish soap into your tub and then start scrubbing with the broom. The stiff plastic bristles will deliver a deep clean, even against tough stains. When you're done, rinse the tub and you're all set.
If you can find Fairy where you live, this is equivalent to the Dawn dish soap. In Europe this is the next best thing to Dawn from the US. Both Dawn and Fairy are produced by Proctor & Gamble and from all accounts have approximately the same ingredients. Dawn in US and Fairy in UK/Europe.
WD-40 is great for quieting squeaks and greasing doors. However, it can also be an excellent bathroom cleaner.
For Red or Black Stains, Use Baking Soda and Hydrogen Peroxide. Use the brightening power of baking soda and hydrogen peroxide to remove tough red or black stains. Do not use this method on an acrylic tub—it may scratch the surface. Mix two parts baking soda and one part hydrogen peroxide to form a paste.
Stains in the bathtub can occur from either trapped water not allowed to dry properly, which forms mildew, or from mineral deposits created by hard water. Regardless of how they got there, you don't have to live with dark stains in your bathtub indefinitely.
To clean your bathtub, simply sprinkle baking soda on every surface that is dirty then add warm water. The mixture should begin to bubble and after about two to three minutes, begin scrubbing. If you have tough stains, combine your baking soda with either vinegar or ammonia.
Try this: Swish a cup of vinegar around in the toilet bowl using a toilet brush, then add a cup of baking soda, followed by an additional cup of vinegar. Let the fizzing solution sit for 10 minutes. Use a toilet brush to scrub stains. Let mixture sit for a few more minutes and then flush.
Soap scum and grime can clog your drain and prevent easy drainage, which will then contribute to grime buildup around the edges of your tub where the water rises while you're showering. Prevent clogged drains and avoid pipe problems with our help!
Back to the question, “can bleach damage a bathtub?” Yes, it can. Bleach can add stains to your bathtub is misused. Remember, it is a massive chemical that, if not used correctly, can cause more harm than good.