You can also reduce your energy costs significantly by raising the temperature while you are at work, away from home, or asleep. For the greatest savings, consider setting your thermostat to: About 78 degrees while you are at home. About 82 degrees while you are sleeping.
According to the Department of Energy1, 78° Fahrenheit is the sweet spot for air conditioners to balance energy savings and comfort when people are at home and need cooling.
Finding the right AC temperature for your electricity bill is a balancing act. By setting it around 78°F and considering external factors, you can enjoy comfort and save on energy costs simultaneously. Remember, small adjustments can lead to significant savings over time.
Best AC Temperature Settings While You Are Home
As you consider the most comfortable room temperature for your lifestyle and family, keep in mind that for each degree that you set your thermostat above 72 degrees, you can save up to 3% on your energy bill.
While the standard room temperature of 72 degrees Fahrenheit is commonly favored by many, others argue for higher settings, particularly when it's hotter outside.
Energy Saver recommends setting your air conditioner to 78 degrees when you wake up, 85 degrees during the day, and 82 degrees when you're sleeping to save the most money. Kureczka suggests bumping the temperature up to the highest setting you're comfortable with.
By setting your thermostat to 78°F when you're home and increasing it when you're away, you can save on energy costs without sacrificing comfort. According to the Department of Energy, you can save about 3% on your cooling costs for each degree you raise the thermostat.
Recommended AC Temperature for Sleeping
The Sleep Foundation says 65° is the best temperature for sleeping. However, if you prefer a slightly warmer or cooler room, that's okay, too. The recommended range is 60–68°, so there is some wiggle room.
Leave Your Air Conditioner On
You might think you're saving money by turning your AC off when you step out of the house. However, a wave of heat and humidity can sneak into your home in the interim. Therefore, leaving your air conditioner on all day in hot temperatures is more energy efficient.
Setting the thermostat below 72 degrees while using an air conditioner can cause the unit to work harder than necessary, leading to higher energy bills and potential damage to the appliance.
What is the Best Thermostat Setting for Summer Air Conditioner Use? Energy Star recommends the following thermostat temperatures for your air conditioner in the summer: 78°F during the day if people are home. 82°F at night if people are home.
Set the thermostat as high as comfortably possible during hot weather. The less difference between the indoor and outdoor temperatures, the lower your cooling bill will be. Keep your house warmer when you aren't home during the day, but cooler when you come home at night.
The best room temperature for sleep is approximately 65 degrees Fahrenheit (18.3 degrees Celsius). This may vary by a few degrees from person to person, but most doctors recommend keeping the thermostat set between 65 to 68 degrees Fahrenheit (15.6 to 20 degrees Celsius) for the most comfortable sleep.
In short, the 20-degree rule of air conditioning states that you should always keep your AC unit at no more than 20 degrees lower than the outside temperature. It means that, if the outdoor conditions are at 95 degrees, you should set your thermostat at no less than 75 degrees.
When you activate dry mode, the fan on your AC is set to a higher speed, which helps circulate and draw moisture out of the air. Dry mode is especially useful during humid seasons such as summertime, when you may find yourself fighting against high levels of humidity in your home.
The ideal temperature for your AC depends on several factors. In general, it's recommended to keep your thermostat between 24°C (75°F) and 26°C (78°F) for a good balance between comfort and energy efficiency. Setting your AC lower won't cool the room much more but will make it run harder and cost you more money.
As it turns out, the most efficient way to keep your home cool and the bills low is to leave the AC running—ideally, with the temperature turned up toward the upper 70s.
The average cost per kWh in the US is currently $0.11, according to the Energy Information Administration (EIA). This means an AC unit could cost you from $5.17 to $5.94 per day to run. Or about $155-$178 per month you're running it.
The constant running will reduce pressure in the cooling coil until it freezes over, which is dangerous as it can cause liquid refrigerant to flood back to the compressor and damage it (the compressor is a very expensive part).
The National Sleep Foundation says 60-67 is a good temperature for sleep, but that might be too cold for you and increase your cooling bill. As a compromise, 70-plus degrees is a good setting.
For many of us, 70 degrees is the ideal indoor temperature, but when it is close to 100 degrees outside, your AC unit will be working quite hard to meet these expectations. Consider setting your thermostat at 75 degrees to 80 degrees in your home if the outside temperature is approaching triple digits.
Quick answer: The ideal house temperature is room temperature, which ranges from 68 to 78 degrees F, though this may vary from season to season. In winter, the average room temperature is generally 62 to 68 degrees, whereas in the summer, the average temperature is 72 to 78 degrees.
One great way to lower energy costs is to avoid cooling an empty house. This is especially true during the middle of the day. If everyone in your household is either at work or school, then turning the temperature to 78-80 degrees will save you a chunk of change when the energy bill arrives.
The best way to save money is by combining both. The “run” feature lets you preset the temperature when you're not home to prevent wasting money on cooling or heating an empty home. Meanwhile, the “hold” button lets you change the room's temperature without changing your energy-saving, preset schedule.
Clean the Thermostat
Sometimes, when the room temperature doesn't match the thermostat setting, the problem could be dirt buildup on its interior parts. A dirt coating around the inner components may create excess heat and cause the thermostat to give the wrong readings.