R-1234yf refrigerant. To date, most auto manufacturers are using the hydro fluoro olefin (HFO) refrigerant R-1234yf as the replacement of choice for R134a.
The GWP for R-134a refrigerant is 1,430, making it 1,430 times more harmful than carbon dioxide when released into the atmosphere. There are three refrigerants that can be used to replace R-134a: R-1234yf, R-152a, and R-744.
A High-Performing Alternative to R-134a
Opteon™ XL10 (R-1234yf) refrigerant is a non-ozone depleting (ODP) hydrofluoroolefin (HFO) option that meets the industry's growing demands for sustainable, safe, and effective solutions.
A Next-Generation R-134a Refrigerant Alternative
Opteon™ XP10 (R-513A) refrigerant is a non-ozone depleting potential (ODP), low global warming potential (GWP) hydrofluoroolefin (HFO) based replacement for R-134a.
While R-1234yf could be the perfect replacement for R-134a, there is one major challenge with this new technology. The R-1234yf is much more reactive than R-134a. On the positive side, this higher reactivity is why R-1234yf is so much more friendly to the environment.
Still, the answer is an emphatic, “No.” Not only would a retrofit of this type negate the environmental benefits of R-1234yf, but it would also be a violation of Federal Law under Section 203 of the Clean Air Act: “tampering” with a vehicle's emissions control device.
With the scientific approach to reduce the global warming potential (GWP) of the refrigerant R-134A (i.e. 1430), the refrigerant R-513A with GWP of 631 is the drop-in replacement.
Possible alternatives to R-134a
Attention is increasingly focused on low-GWP refrigerants that are hydrofluoroolefins (HFO). R-1234yf in particular is often seen as a possible alternative to R-134a. The GWP value of R-1234yf is 4, which means it has a very low global warming potential.
In the United States, vehicles produced after 2021 no longer contain R-134A in the air conditioning system. In other parts of the world, including the United States, there are restrictions around using 1,1,1,2-tetrafluoroethane. Specifically, in California, retailers can deny selling customers canned R-134a.
HFC-134a will no longer be allowed in nonroad vehicles as of January 1, 2028. Servicing of existing vehicles using HFC-134a with HFC-134a will not be impacted and will continue to be allowed.
R-1234yf systems that control freeze protection by pressure may encounter loss of cooling performance if charged with 100% R-134a. This is due to the requirement of R-134a to have a lower setting of 3.3 psig to achieve freeze protection at 32 F. This may result in a 4-degree F.
Also, substitutions are often not without problems. For example, when replacing R22 with R134a, there are many problems that cannot be replaced directly; the cooling power of R134a is 60% lower than that of R22, which means that the condenser of the system must work overtime to achieve the same cooling capacity.
R-1234yf refrigerant. To date, most auto manufacturers are using the hydro fluoro olefin (HFO) refrigerant R-1234yf as the replacement of choice for R134a.
The sales restriction is established by EPA regulations (40 CFR Part 82, Subpart F ) under Section 608 of the Clean Air Act. Only EPA-certified technicians are allowed to purchase ozone-depleting substances (ODS) or non-ozone depleting substitutes used as refrigerants, with limited exceptions.
R32 and R152a have a reduced global warming potential than R134a, which indicates that R32 can be used as substitute for R134a in refrigeration systems.
Some notable substitutes for R134a [10] in AAC based on the preceding studies are R1234yf [[11], [12], [13], [14]], R1234z (E) [[15], [16], [17]], R152a [[18], [19], [20]], R290 [21,22], R744 [[23], [24], [25]], R430A [26,27], and R444A [28], etc.
R134A............
Any HFC refrigerant such as R134A must have POE oil. If there is ant MO present it should be less than 5% or you will have problems. You can use the old CFC refrigerants like R12, R502 and R22 with POE or AB.
Internal heat exchanger for R1234yf refrigerant (photo: NRF) As you can see from the above description, R134a and R1234yf refrigerants are not completely identical and their substitution will always result in faster degradation of the A/C system and eventually lead to costly repairs.
A: If the refrigerator is designed for 134a, yes it can be used with the right equipment for charging.
RED TEK 12a is designed as a direct drop-in replacement for R-134a and R-12 substitutes.
R-513A – also known as Opteon, it is a next generation non-ozone depleting, low global warming potential hydrofluoroolefin (HFO) that replaces R-134A. R-600 – an efficient natural refrigerant suitable for refrigeration applications. It is environmentally friendly and efficient.
However when the condensing temperature gets lower, R1234yf outperformed R134a. Over the range of operational conditions tested, the maximum difference in terms of cooling capacity is less than 5% and the COP is less than 10%.
Switching to R1234yf refrigerant is a step towards a greener future, but it comes with higher costs due to advanced equipment, stringent regulations, and specialized training.
R-32 is the most balanced refrigerant in terms of environmental impact, energy efficiency, safety, and cost-effectiveness. Refrigerant is a medium for conveying heat.