Simply fill a spray bottle with equal parts water and vinegar (or water and baking soda), and add a little bit of liquid dish detergent. Spray the mixture on your concrete surface and let it sit for about 30 minutes. Then scrub and rinse your concrete.
In fact, vinegar removes mold from concrete better than bleach. Bleach will only remove the top layer of mold, causing the mold to return.
Use a detergent such as Dawn or Ajax dishwashing liquid mixed with water to brighten a concrete patio that hasn't been cleaned in a while. Use a detergent such as Dawn or Ajax dishwashing liquid mixed with water to brighten a concrete patio that hasn't been cleaned in a while.
The Liquid peroxide cleans, refreshes, and brightens concrete, tile, and grout without leaving watermarks or residue in contrast to other cleaning chemicals. Powdered peroxide-based formulas are generally high-performance alkaline, tile and grout cleaners and degreasers that are made for use on heavy-duty concrete.
Driveways and Sidewalks
If you don't have access to a pressure washer, you can use Super Clean, a hose and a garage broom to get similar results. Spray the area down with cold water, spray on some Super Clean and let it sit a few minutes. Work it into the concrete with the garage broom, and rinse with the hose.
Vinegar and Baking Soda
Simply fill a spray bottle with equal parts water and vinegar (or water and baking soda), and add a little bit of liquid dish detergent. Spray the mixture on your concrete surface and let it sit for about 30 minutes. Then scrub and rinse your concrete.
In addition to sequestering carbon, an advantage to adding baking soda is a faster-setting concrete mix that can allow formwork to be removed earlier, reducing the time required to complete a structure, says Admir Masic, the study's lead researcher and an associate professor in MIT's department of civil and ...
Product description. OxiClean is a powerful concrete cleaner that works well on various materials, including pavement and grout.
Mix bleach with water and then add dishwashing detergent to the mix and put it into a spray bottle. Spray the solution onto the cement patio, let it sit for a few minutes, then scrub the mix into the concrete with a stiff brush.
But that's not all; chlorine bleach can also be used for cleaning the concrete driveway. Of course, you should dilute it with equal parts of water or a 1:1 ratio. With the mixture ready, spray it on the driveway, allowing it to sit for 10 minutes. Then, use a stiff brush before rinsing with clean water.
But common pantry essentials that are often used for cleaning — like baking soda and vinegar — shouldn't be mixed either. Unlike the bleach-ammonia mixture, combining soda and vinegar won't hurt anyone — but don't expect the mixture to do a good job cleaning, either.
Spraying a vinegar solution (1 cup of vinegar per gallon of water) onto the surface, saturating it fully, should kill most strains of mold. Vinegar spray can be followed by power washing or manual hand scrubbing to remove the dead mold.
Our top pick for an alkaline concrete cleaner, Sunnyside 64216 TSP All Purpose Cleaner, is recommended for indoor surfaces and works quickly to remove tough stains. Acid concrete cleaners are made with phosphoric acid or hydrochloric acid, which cause a chemical reaction that lifts stains.
Hydrogen peroxide is another concrete cleaning item that is easily available at pharmacies, grocery stores, and home improvement stores. For a natural, stronger solution to tackle stubborn stains on concrete surfaces, mix flour and hydrogen peroxide into a paste the consistency of peanut butter.
“In technical terms, sugar (coke) acts as a retarder and delays the setting time of concrete.” This is the reason why transit mixer drivers are sometimes advised to add some soft drink to the concrete mix if the vehicle gets stuck up in the traffic for too long.
Although bleach is great at the whitening effect, you can use peroxide to achieve this. Hydrogen peroxide is an oxygenated bleach. It is safe for plants, so when you rinse this solution, it won't harm anything. It works together with the dish soap and baking soda to remove dirt and whiten dirty concrete.
Mix a solution of 1/8 of a cup liquid dishwashing detergent, ½ cup baking soda, and one gallon of water. Use a soft brush to scrub the mixture into the stain. Rinse, or use sawdust to absorb the soapy water. Sweep the sawdust away.
Because of this, it can cause harm to certain varieties of concrete surfaces. For example, vinegar can etch or discolor concrete surfaces that contain a high concentration of lime. You must do a preliminary test on a tiny, unnoticeable area before utilizing vinegar to clean the concrete surfaces in your home.
Using harsh chemicals and certain cleaners can damage the floor, dull the shine further, and even discolor the polished concrete. Some of the things you don't want to use on your polished concrete flooring include: Vinegar. Windex.
If your area is more prone to algae and mold, then you may want to wash your concrete more often. You should pressure wash your concrete at least once a year to protect your concrete and the value of your home. Using a concrete sealer can also prevent damage to your concrete after it has been washed.