While there are many ways to clean drywall dust, good old H20 is the best. Dust absorbs the water, and the dust becomes weighed down and unable to dissipate into the atmosphere. After spraying the dust, you can use a broom or vacuum to remove it without fear of it floating into the air.
After thoroughly vacuuming, use a dampened microfiber mop to clean drywall dust from the floor. It is important though, to find the right balance of cleaner to dampen the floor without getting it too wet. Excess cleaner can cause a slurry of wet dust that you just push around rather than removing it.
Powerful Vacuum Cleaner or Shop Vac with HEPA Filter: Air filters are ideal to thoroughly remove construction dust. Microfiber Cloths: Along with a damp cloth, they are efficient in capturing fine dust particles. Sponges and Scrubbers: Essential for remaining dust. Plastic or Rubber Gloves: To protect your hands.
The best solution for cleaning walls is mild soap and warm water, as the soap will work hard to remove grime without harming the painted surfaces. If you have tougher stains or built-on dirt, you can scrub away these imperfections using a mix of baking soda and water, which acts as a natural, mild stain remover.
Wipe Down Hard Surfaces
Dry dusting is the safest way to remove the particles without damaging a wall's surface, but a damp cloth can also be used depending on your type of paint or wall covering. Refer to the paint or wallpaper manufacturer before using any moisture, and test a small area before proceeding.
“Microfiber cloths are the best,” Day advises. “Using a soft cloth to your walls will help prevent you from scrubbing or scraping any paint affecting the interior.” Baking soda (“Baking soda can be effective—however, I would be as gentle as possible so it doesn't harm the finish,” Day says.)
Microfiber Cloths
Traditional cleaning cloths just don't cut it anymore. Professional cleaners know that microfiber is the way to go, and there's even science to back up this thinking.
Given the factors mentioned above, determining an exact settling time for construction dust can be challenging. However, as a general guideline, most construction dust begins to settle within 48 to 72 hours after work has ceased.
Whenever I have to do drywall work and paint, I use the swiffer to dedust the walls and ceiling. It cuts down on so much time and work. Plus, no ladder required.
Vacuum Cleaner: A vacuum cleaner with a HEPA filter is essential for capturing fine dust particles. Microfiber Cloths are excellent for wiping down walls without leaving lint behind. Water and Mild Detergent: A warm water and a gentle detergent will help break down sticky dust residue.
Yes, air purifiers play a big role in cutting down on construction dust and debris while projects are taking place in the surrounding area.
Hang plastic sheeting.
Plastic sheeting helps keep the dirt and dust in the work area. It also works well for creating walls to protect other areas of your home. We used it to protect our storage area and the area where our water heater and furnace are located.
Dry Dusting with Microfiber Cloths
Begin by dry dusting the walls and ceilings using a clean and dry microfiber cloth. Gently wipe the surfaces, starting from the top and working your way down. Microfiber cloths effectively capture and hold onto dust without spreading unwanted materials around.
Drywall dust will either frequently clog filters, or rip your filter. Drywall dust will also wreck your vacuum motor. Typically vacuuming drywall with a shop vacuum will also end up being redistributed through the air from your vacuum.
Misting drywall dust with water is the best way to clean it up. The dust absorbs the water and will be easier to sweep or vacuum up without becoming airborne again.
Shop-Vac® High Efficiency Disposable Filter Bags are ideal for picking up fine dust, such as, drywall dust, cement dust and cold ashes. They are easy to use and install. The bags keep your tank clean and makes clean up a breeze. Simply, remove the bag from the tank inlet and throw it in the trash.
Get an Air Purifier
"Although an air purifier can not remove dust entirely, it can help to reduce the amount of dust settling in your home," says Sokolowski. "When dust enters your home it does so by floating around in the air.
Yes you can hand wash them and then buy a can of original Endust in the red can. Spray it on the washed Swiffer dusters when ready to reuse. The red can Endust is made to spray on a cloth or dust mop to make it "static" and collect dust better. Only respray after next washing not at every use.
Capture dust
When cleaning your house, use a damp cloth rather than a feather duster or a dry cloth to remove dust. Use your vacuum cleaner's attachments to clean difficult-to-reach areas where dust usually gathers.
“Cleaning walls with a Magic Eraser and Dawn dish soap can be an effective method for removing dirt and stains,” Carpenter says.
The best way to clean your walls is to use a mixture of white vinegar (1/2 cup) and warm water (2 cups), and you can add a few drops of liquid dish soap for a deeper clean if your walls are very dirty or stained. For wood walls, add 2 tablespoons of lemon oil or an oil soap to the mix.
No matter what kind of paint you have, washing it is a gentle task, not a hard scrubbing one. Instead, use a soft sponge and a bucket of clean water, some mild dish soap or white vinegar and possibly some baking soda for the tough spots. Don't use a scrubby or steel wool or any kind of textured scrubber.