Vinegar and baking soda are a versatile, efficient cleaning team for several spaces around the house, and kitchen and bathroom sinks are no exception. If you don't have lemon, follow your baking soda application with an undiluted vinegar spray to get rid of hard water marks and other difficult stains.
There are a few ways to restore your porcelain tile after you've come across a stain. You can try tackling the spot with some hydrogen peroxide or by using a steam cleaner. For more difficult stains, consider trying diluted muriatic acid, an industrial-strength solution professionals have been using for decades.
Put a cup of hydrogen peroxide in a spray bottle. Spray evenly over the porcelain. Let the hydrogen peroxide sit for 15 minutes to an hour. Rinse and buff with a microfiber cloth for a clean, bright shine.
A baking soda and vinegar solution is perfect for cleaning a porcelain sink and removing stains. Make a paste out of the two ingredients and use a soft-bristled brush (such as an old toothbrush) or cloth and your finger, to apply and scrub the stained area.
Step 1: Wet your microfiber cloth or sponge with hot water and a few squirts of dish soap. Step 2: Wipe down the sink and apply a lil' elbow grease to any spots that are extra dirty. Step 3: Rinse away the soap and grime, et voila! Your sink is sparkling clean and ready to be used again.
Porcelain is a highly durable material for dental restorations, but it is not entirely indestructible. Stains will not penetrate the surface of quality porcelain restorations unless the porcelain has been damaged by: Highly abrasive toothpastes that wear away the outer glaze of the porcelain.
The brown stain is from a large amount of iron in your water.
For white porcelain only, bleach can be used to remove stains; never use chlorine bleach in colored or vintage porcelain, as it can damage the finish. For both white and colored porcelain, liquid oxygen bleach—such as hydrogen peroxide—is a good alternative.
You can safely use vinegar to clean ceramic or porcelain tiles, whether they are glazed or unglazed.
Many homeowners ask if Magic Erasers® can be used on porcelain or if they will damage ceramic tile. The good news is that they can be safely used on ceramic tiles and porcelain, so you have nothing to worry about if you plan on using them this way.
The bathroom sink, especially a porcelain one, can tend to get quite nasty over time. You see a lot of discoloration around the drain and the overflow hole. Just apply the concentrate solution to both areas, let it sit for a few minutes, then scrub it with a cleaning toothbrush.
For white porcelain only, bleach can be used to remove stains; never use chlorine bleach in colored or vintage porcelain, as it can damage the finish. For both white and colored porcelain, liquid oxygen bleach (such as hydrogen peroxide) is a good alternative.
That being said, non-abrasive cleaners are the best way to clean a porcelain sink. Common household go-to's like bleach and hydrogen peroxide can be used to clean white porcelain, but the solution would need to sit covered in a layer of paper towels for 30 minutes to an hour.
CLR's unique formulation has multiple uses! Safe for various applications and surfaces… (tubs, showerheads toilets, sinks, porcelain, glass, cement, stucco, brick, stainless steel, and much more)!
Though popular for being gentler alternatives to harsh chemical cleaners, baking soda, Borax, and even salt can harm the finish of your porcelain fixtures. As gentle as they are, these compounds are still abrasive and will scratch your finish, especially with regular use.
While hydrogen peroxide is not normally used for cleaning surfaces, there is nothing in normal glazed porcelain that it would damage.
Is Comet safe to use on Corian, Formica, porcelain, fiberglass and stainless steel. Yes. Comet Cleansers, Comet Soft Cleanser and Comet Bathroom Sprays are all safe to use on these surfaces.
Firing spots are brown or black color defects clearly visible, dark bullet holes on the outside of the porcelain. Please do not confuse them with the dark brown bleeding iron spots which originate in the raw material.
As the water flows out of the bowl when you flush it, the minerals it contains slowly etch away at the porcelain's sheen. This creates small holes where the contaminants start to accumulate and turn the bowl yellow. The two most common impurities that cause yellow stains are hard water minerals and tannins.
A baking soda, salt, and vinegar solution can help remove hard water stains if left to sit in a sink for thirty minutes to an hour. When you remove the drain plug, the foamy stuff will also unclog the sink pipes on its way down!